Search results

if you have a no vats ECU it will work with any compatible BCM without any linking through software

yes, physically and mechanically it will bolt right up, if you use a vt manual ecu and a no vats memcal, vt manual loom you won't have any issues

attaches to a security alarm horn on my calais, stays disconnected on most models

Rust behind tail light filling boot with water. 00 VX sedan. Factory lights. What's the best way to repair this?

Loving having my VT wagon running again, but the roof rattles with bass in music. The noise comes from between the two back handles on the roof trim in the back seat. And it's not like I have about stereo or anything, just the factory unit

Any ideas?

This is doing my head in, 3.8 Auto VT Berlina. Pretty much stock It's idling between 1650~2100 rpm, and only dropping to 1000rpm in gear, also building speed quickly coasting in gear, when stopping I've been putting it in neutral It's lurching when put into gear as revs are up The purge...

late reply, post in vs thread

Not worried about electrical problems, just fitting. Doing up a vx and want leather seats and all i can find are ve Calais ones (launceston tas)

Mate ask in the VT-VX section;)

Can I get a higher res copy of the image please?

Yeah my boot pops about that much. I am just trying to get some auto opening action as i intend to install a custom subwoofer box. And i want it to just be a bit showcar-y

Did they open to 100%

I was thinking springs maybe?

My car has a vx talon spoiler attached. Does your boot lift by its self when you press the unlock button on the key?

my vx sedan has the button on the key to pop the boot, if I put in slightly stronger struts would it lift the boot with no human support? something like this: https://forums.justcommodores.com.au/temp/gfycat/DigitalWateryHapuka-mobile.mp4

I happen to have one of the washing machines. Not sure if i have a photo on hand. I will get one soon

Add duct tape

Who else knows about/owns one of these

Do you think they would have one? They only have 2006 and up cars at my local wreckers. And no pick and pull. I dont want to buy an entire harness for a single plug and a few cm of wire

Does anyone know where i can find one of these plugs, i dont like my chances at local wreckers either. For a vx with 4 door speakers, 2 dash tweeters, steering wheel control and power ant Just to be clear i need the part in the car, not an iso harness

Does this look any good? Tech2 Diagnosis Tech-2 FlaGM/SAAB/OPEL/SUZUK/Holden/ISUZU add 32MB Card www.wish.com/share/3286bcasje I dont think it is an oem gm one? Just pissed off with airbag light Launnie tas

But the bulb tested fine

Just checked and the glovebox light is dead too

Im trying to figure out why this relay even exists, the light works fine if i just bypass the relay, drawing no current when off The relay is on no matter what. Constant to battery.

Yeah its hot (temperature wise) even with ignition off

I was looking around in the fuse box and touched this *relay??? And it was hot to the touch with the ignition off. I disconnected the battery Its the one with the blue stripe. IN 0033

Hey mate yeah, its the wiring section that i need;)

Can you send me a file of the cd mate?

Yes I'm using the blade, but my door lock is flogged so its a pain. Takes a certain method to turn it haha

Nah mate, i should though to be honest

Yes central locking with from inside the car works, and its pretty urgent as other people use my car and dont know how to get in/left it unlocked. They left it unlocked by the whole key thing and my subs and macbook got stolen:mad: Other thing is i only have 50$ to fix it .. .

Hey everyone, just picked up a new ride (01 VT) The previous owner had the ignition barrel replaced, but now i have to use 2 keys. I have the OEM key for the door(just a blade) And i have the new key with the original fob for the ignition. Can i have the ignition barrel rekeyed To the oem key...

Oh crap really? Does anyone have an .ISO file for the interactive workshop version. I found a torrent but it was dead :(

Thanks for the help fellas, got one off of the local tuning shop for a fiver

I have an older custom obd 2 programmer and i lost the obd2 to serial connection. I have the pinout

Your a legend mate

Yeah but i am looking to wire a serial plug to it, not linking 5 and 6

Sure does mate, know anywhere on launnie that might have em

Does anyone here know of a working link or have one that they can upload? Regarding a 1999 Commodore VT