Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. V

    Plenum spacer 25mm

    Is anyone running the 25m plenum spacer on ln3 any problems? Mace website say only for the l67 and boosted applications not recommended for stock ecotec just curious as to wwether I should fit it or if it causes any problems or losses? Tia
  2. V

    25mm manifold and 12mm plenum spacer

    Hey mate I've just bought a 25mm spacer didn't realise that mace website only recommends the 25mm for the l67 motor is there any point of putting it on my vx v6 or is it strictly for the sc6 tia I'm hoping to get it on thi weekend..
  3. V

    anti abuse mode ?

    Not that game lol was just curious haven't actually herd of this abuse mode till this arvo.. I know it's there in the vz from my last one have a vx now and keen to see what it does under brake and throttle tomorrow lol..
  4. V

    anti abuse mode ?

    So I've seen a utube vid about chopping 4 wires adding a diode and re joining set wires which basically let's you lock in 1st gear and do limiter bashing spins would this effectively disable this abuse mode ****?
  5. V

    Projector head lights

    Mourning guys just wondering if anyone knows what type of bulbs I need for a set of vx alteeza projector headlights just for the blinker and if I can get them from sca? Tia
  6. V

    Brake Fluid... Which DOT?

    Thanks very much for all your advice parked up pumped and no change so pretty confident it all worked...
  7. V

    Brake Fluid... Which DOT?

    Thanks mate done all of the above and closed loop bled the cylinder as stated above if there was air the peddle would come up when pumped while car is running and it's holding still in the same place I'm pretty certain that it's all good and yea the two person brake bleed was wat I did when that...
  8. V

    Help pls

    Cool thanks mate I changed the master cylinder and couldn't get any peddle after bleeding the brakes so I tryed the closed loop system to bleed the mc than done the brakes again have peddle not as much as I didn't before I changed the mc but it's stopping the car and no dash warning so...
  9. V

    Help pls

    It doesn't it has hn1796 the only one I could find that conform to it was super dot 4.
  10. V

    Brake Fluid... Which DOT?

    True what can I do about that? I bled the brakes again after the cylinder put 3 500ml bottles through it. Will that have had affect on that?
  11. V

    Brake Fluid... Which DOT?

    Thanks mate I used the closed loop method I seem to have peddle and it's stopping OK but if need be I can try your method thanks heaps
  12. V

    Brake Fluid... Which DOT?

    Nah I didn't is that the screw on the side of the mc? Can I do it while it's on the car or do I just have to take it off?
  13. V

    Brake Fluid... Which DOT?

    Cool thanks mate I changed my master cylinder because my one was leaking from the switch on the bottom the new one isn't leaking but I've put a litre of fluid through and still no peddle and still air in the system do I just need to use more fluid and keep bleeding till no air and I have peddle...
  14. V

    Brake Fluid... Which DOT?

    Is super dot 4 OK to use?
  15. V

    Help pls

    Guys is super dot 4 OK to use in an 01 vx spac?
  16. V

    Will VY tail lights fit to VZ?

    So they are worth a bit thanks mate I scored than I paid $25 for the pair with the wiring loom and plastic bulb holders.
  17. V

    Will VY tail lights fit to VZ?

    Hey I should of asked here first but from what I can gather from this post the vz sv6 lights are smaller than the vz Acclaim one but the vy calais one fit on the vz Acclaim? Am I right?
  18. V

    Relay help

    Hey mate did u sort out your relay problem or are they still getting hot and burnt?
  19. V

    Vz engine control relay burnt

    So did anyone figure out the cause for this or the solution or should I just replace and keep replacing? Tyia
Top