Search results

Aslong as you keep the pcv valve it would be alright but harder.

Paint mobile or an automotive paint shop will match perfectly. Otherwise auto barn and super cheep will try using the pant code on your car but I have had trouble with that.

I have looked for this answer and quite frankly I'm lost. On a VZ Berlina with climate control. Where is the face HVAC solenoid located and how do you get to it? Its driving me nuts it has a high pitch ring that even makes dog howl

I like this article. I know from working on them that the alloytec has 6 injectors. If the article is indeed correct then the engine is a MPFI with SIDI. How did you find it?

Any one know what type of fuel injection a 2006 Commodore vz Berliner with the LE0 has? GDI? PFI? MPFI? SIDI? something else?

I have been documenting my fuel usage with 91 and 98 for over two years now. With 91 I get an average of 11.93L per 100km I have not used 95 with 98 I get an average of 9.74L per 100km For my VZ Berlina it works out that I save about $1.10 per 100km using 98 Also the car idles better and runs better

I have been documenting my fuel usage with 91 and 98 for over two years now. With 91 I get an average of 11.93L per 100km I have not used 95 with 98 I get an average of 9.74L per 100km For my VZ Berlina it works out that I save about $1.10 per 100km using 98 Also the car idles better and runs better

I have been documenting my fuel usage with 91 and 98 for over two years now. With 91 I get an average of 11.93L per 100km I have not used 95 with 98 I get an average of 9.74L per 100km For my VZ Berlina it works out that I save about $1.10 per 100km using 98 Also the car idles better and runs better

Hi Everyone. Do catch cans need to be baffled? Will a sealed baffled catch can filter better then one with steel wool? Any one that has tried both systems? For a VZ that burns very little oil.

Actually I was wrong that line is not from the purge valve.

Gday when I start my my 06 VZ between auxiliary and tuning over the engine I loose power to the interment cluster, radio and power sauce. The abs light comes on beeps and then disappear as if noting is wrong with no history codes or anything. When turning over the engine It also sounds like the...

Gday does anyone know where the ECU power supply unit is located?

You cold try it but if it does not work I doubt you will be able to get you're money back from repco, and the way the keys work with the encryption I don't think it will work. Getting two new keys from Holden is $120 I would recommend going to Holden or the auto electrician otherwise if it is...

No one in their right mind would get a new key every six months I’m saying to switch between the two keys you have every six months. But I see what you are saying

Late but if you turn the lights on and unplug the battery for a cupple of hours you can reset the CPU

A P0010 code refers to the VVT (variable valve timing) or VCT (variable camshaft timing) components and the car's PCM (powertrain control module) or ECM (engine control module). VVT is a technology used in the engine to allow it to get greater power or efficiency at different running points...

Try speaking with mace engineering they may be able to help (03) 8685 8674

If it is a whining noise check the HVAC solenoid actuators

I just want to add to this thread because I recently had my battery go flat in my remote and my mate who is an electrical engineer tried changing the battery with no success. The remote is made from ABS plastic and is plastic welded. We had to cut the remote using a dermal in order to check the...

The brown line that goes into the intake pipe is not a PCV line it runs of the purge valve.

Hi Everyone I am just about to paint my car as soon as the weather permits and I was wondering what results anyone has gotten from using Autobarns concept acrylic paint, specifically the mix for a spray gun base and clear.

Hi what size spacer do you have I have the 12mm? I have noticed the engine being cooler but takes a lot longer then yours to be touchable.

Car instant fuel, trip metre and at the pump

I think I have a bad fuel pump I took the spacer out and it had the same economy.

yah it was mace however it should not be that big a difference there was defiantly something wrong and was not running right because of it. you were right mace did have some info https://www.maceengineering.com.au/epages/shop.sf/en_AU/?ObjectPath=/Shops/mace/Products/MI646

does any one have any stats on the difference a plenum spacer makes to power economy and heat reduction? I got a 12mm spacer but I think did not put the gasket maker on properly, so there was a vacuum leak and freeway economy went from 10L per 100k too 5.5L per 100k.

thanks that helps fill in the gaps I have to take the dash off at some point any way for another fix. I once had a phone mount the type that slides into the vent, one off the rubber clips fell down the vent could that be causing any problems?

its working now can switch vents and it did not change when going up the hills at 45 degrees so I don't know what is going on there. I checked no manifold leak. what do you mean when you said (This meant taking dashboard out to access the manifold, so never fixed it.) the manifold is under the...

The AC vents change now so Im not sure whats going on now good to know that tho could be something to go off.

Noting to do with start up. She idles good for a car that has done 261000 there is a slight flicker of the RPM meter but noting to worry about and a slight shake but noting to complain about. interesting that you mention the AC and vents, I hardly use the AC so I did not notice but the vents...

I tried uploading a sound recording with the post but it failed. and no its more like a vacuum cleaner but a lot higher or a mosquito but louder

Hi I have this whining noise sound like its coming from the dash any ideas?