Search results

I bought a scan tool from Super cheap auto and it works great $50

it's a V8 L76 once it is removed can it still be driven? or will oil leak out? Thanks for your reply

changed the oil and filter and cleared the 180K service request but it still beeps and carries on a few times during every drive oil sensor maybe? where might that be? Thanks Craig-

Thanks

Ball joint? bushings? any test I can do? Shocks and springs are new and not lowered VZ ute where should I start looking or who to take it too? thanks

anyone know what size socket I need? 16mm deep one? Thanks

whatever it is has gotten worse with time

if I spend a long time at the bowser I did fill it to 60ltrs a couple times but harder to do that now

yes at the bowser

My VZ ute has problems filling the petrol tank, it is supposed to hold 60ltrs and I can only get about 35ltrs into it it says full even when it is not. any ideas? Thanks in advance C-

everything depends on height, mine came with 20s on SSL King springs and guards were rooled and one of the rear tyres rubbed. 18x 8x245 is stock for fronts, 9s will be close as there is not much clearence on the front, stick with 8s if you can. Backs have lots of room (again depending on height)...

or where to get one? any specific year needed?

I see on ebay fiberglass inserts, but was looking to get a complete ready done one, not sure if they are fiberglass or steel

Whats the deal, is it complete or how? Thanks

will sedan front seats fit my ute?

what are my options? what will fit my VZ thunder to re upolster will be around $1000 for just the drivers side if they can match the color? pasenger side is still perfect

how do I scan it? do I need to have a mecanic's scaner?

Everything seems normal except the temp gauge dropped to cold instead of 1/4 warm where it usually sits. 06 6ltr 6 speed amanual Ute thanks in advance

That's it? no help? these are really loud squeeks! like an old matress in a western movie at the whore house

I can't seem to locate what sounds like body rubbing sounds bushes maybe? I don't think lube jobs happen anymore like the old days C-

I leave the key in the ignition while parked in my garage, does that matter? The key has the locking buttons on one side. I found the other key, but it does not fit into the ignition for some uknown reason It does not do it every time, and seems to have stopped now, when it did do it it would...

Thanks for all the help guys, I guess I will start by getting my other key and see how it goes, also check the battery as it did sound a little weak one time.

sometimes nothing happens (silent) when I turn the key, then I try again and it starts but I get the "immobilizer fail" warning It is also telling me it is time for my 160K servace (if that is related)

Just the usual hole at the top through the outside skin that could be leather? Bugs me cause that is exactly where I put my hand. looks like the leather laced on is in sections, may be able to just replace a section? Is there a place that does it? motor trimmer? or is it easy to DYI? Thanks

But even my current wheels which are 8.5" +24 fit fine with the guards rolled. Thanks so +25 work OK on a VZ with rolled guards? What size tires?

I was considering cutting the existing guards up to the inner tubs, then fixing some kind of kit guards that came out and back down. But if it is not legal then I am not going to go down that path.

4x4s can get away with 50mm extra and they go much more

I want to fit 8" fronts and 10" wide rears, but the wheels I like don't have + offsets (ET) It had 10" wide when I bought it and they fit even when it was super low and they were 20" rims, but they had the correct ET Now I have new king springs (raised as high as it will go) and yes guards are...

All the wheels I like will not fit because of the +45 offset Is there a kit to flair the guards to take wider wheels with 0 offset? and are added guard flairs legal in Qld.? Thanks in advance C-

Tapered wobble nuts locate them correctly, so I am told

I'm not expert, and I am still trying to understand this...The wheel maker told me that the correct wheel for the correct car still has clearance which makes sense otherwise it would not fit on and off unless the center was tapered? Seems like with wobble nuts correcting for the location on...

I was pretty impressed with mine when I carried a big load of heavy sand and turf to the tip...My opinion a ute should be able to handle the load it is designed to take.

Chevy 5x120.65 vs Holden 5x120 that's only .65 of a mm... His point was there would be that much clearance on a Holden wheel at the center hub anyway, if there was not any clearance you would never get any wheel on or off. I realize wheels are high-speed dangerous things, but there is a...

just put new King Springs to suit your ride height, they are stronger and will help with load carrying

I was told by BCI wheels where they make them, that everything has clearance, and if you use "wobble nuts" you can run Chevy 120.65 wheels if tightened slowly in the correct sequence. he also said the center bore has clearance, so the studs do all the work.

would this be the part I would need? VU VY VZ Holden ute SS S sail plane rear roof centre side trim panel 470G

My ute came with what looks like an aftermarket roof extension that combines with the hard lid. I want to remove it so I can fit builders racks but I don't know what part is missing?

I am trying to remove the plastic roof extension that I am guessing was a Maloo body kit? Just wondering what is missing from the orig? Is this how they come from the factory?

Is it very had to change tailgates?

forgot the immage