Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. S

    sprucing up the faded parts

    ok, ta danny.... i will give it a shot, as it is quite bad on my car. i did already sand them down a lot, still needs more though. so after the K&H, finish it with an auto gloss spray? just a thought here, the member above saying 'Metho contains oils' it does? i always thought it was...
  2. S

    sprucing up the faded parts

    with the painting of the rubber\plastic whatever bits around the rear side windows, wouldnt some sore of primer be used to stop the oils of the rubber stuffing things up?
  3. S

    Clear plastic door trim dust cover ideas...

    when i did one of my front doors, i just cut son heavy plastic (like builders use under concreat) cut it to shape, stuck it on with a few dabs of contact adhesive, then ran good ol gaff tape around the edge before replacing the trim
  4. S

    boby work around doors help please

    ok, thanks kopper69, ill try sanding it. i guess it shoul work ok, primer sticks to plastic, paint sticks to primer... do you remember the thread? with my sketchy description i woulna know where to look ok, found this one, mine is the plastic around the windo behind the door, but i guess...
  5. S

    boby work around doors help please

    ok, i will try to explain. on the sedan, there is hard plastic (?) around the window behine the back doors. this plastic is now pitted with paing worn off, i would like to fix this up. can i sand the surface, use sandable primer to snothe it out, then spray it? ta
  6. S

    Gone in 20 minutes - using laptops to steal cars

    how about going real high teck, thumb print or retinal scan before you can start the car. or a simple 6 digit alpha numeric code
  7. S

    Power v Economy

    ta, immortality... but all that coating stuff sounds like a real expensive and long job at the mechanics... but the CAI and K&N looks like a good start
  8. S

    Power v Economy

    ta beefcream, one post was a typo duplicate...
  9. S

    Power v Economy

    ok, i know most of you guys are out to squeeze every possible hp out of your motor as possible, and i see many ways mentioned of doing this. but what ways and ideas are about for getting better economy from the motor (V6, VP, auto)
  10. S

    Power v Economy

    ok, i know most of you guys are out to squeeze every possible hp out of your motor as possible, and i see many ways mentioned of doing this. but what about the other side of the coin, getting better economy from the motor (V6, VP, auto)
  11. S

    clunking when turning

    i have a clunk from the back end when turning.... just a thought, but as you was on a farm, did you look under the wheel arch to see if you had picked up anything?
  12. S

    changing diff bearings

    thanks guys, will ring around for some prices, some big mob maybe, or independent for best deal ?
  13. S

    Look what some one did to a VR

    so thats what we can do with the spare parts knocking around the garden
  14. S

    changing diff bearings

    i have a somewhat noisy diff on my vr (whiring sound when driving) how hard is it to change the bearings? and anyone whos done it could you please tell me the steps. ta i have changed the diff oil, and the big cogs look ok, couldnt see any chips or the like in them. (yes guys i did do a...
  15. S

    diff service

    just changed diff oil in my vr. found easy way to do it was a short length of plastic pipe and fill a old washingup liquid bottle (or similar) connect pipe to bottle and gently squeeze. worked well for me at least :)
  16. S

    VR door lock wiring

    thanks for speedy reply evil_monkey :)
  17. S

    HELP ME!! VR overheating

    friend of mine had overheating prob, turned out to be thermostat
  18. S

    VR door lock wiring

    hi guys, replacing door on me VR sedan, just having prob with lock wiring, iv got the main cable pluged in at the bottom of the lock, but there is this smaler cable ( 3 wires in it black, brown, red\yellow) that has a microswitch on the end of it, where on the lock does this go?
Top