Search results

hey bruuu you selling any cheap white holdens

Looking for a V6 Supercharged ECU - only the ECU nothing else DESCRIPTION: Wanted to Buy ITEM: Looking for a V6 Supercharged ECU - only the ECU nothing else LOCATION: Victoria, werribee DELIVERY/PICK UP INFORMATION: can pickup PAYMENT OPTIONS: cash CONTACT DETAILS: PM me here

cancel thread, cheers i found one

that didn't answer my question, and that's for cars that are registered... next..

If I put a VT SC into a VY non-SC car - Can you run standard injectors on the VT SC motor with the standard vy ECU,BCM & loom At the moment I put a VT non-SC ECU,BCM in the SC car and it ran, but a little too rich...so I was thinking If I put the standard non SC injectors in, would it be...

so far no luck with finding a rolling shell, however it looks like I found myself a a VT for $600 driveable, so i guess it's a start :) but need to drive 1hr 40 minutes to pick it up

cheers, i've gone with buying a rolling shell - see what I can find :)

As I have aquired a vt v6 supercharged car, im looking to put the motor & gearbox in another car(only looking for a rolling shell) DESCRIPTION: Swap/ Wanted to Buy / Trade ITEM: I want to buy a VS or VT rolling shell LOCATION: Victoria, werribee DELIVERY/PICK UP INFORMATION: can...

It drives. I.already have possession of the car just not sure what I should do conversion or repair. It still drives and in a straight line bonnet stills pops open with the button :P

just wondering how hard it's going to be to have it repaired (it wouldn't be going back on the road) so a repair job wouldn't be fussy about, with no respraying.. maybe a couple of fun days at say.. winton.. or else where... just for something to do.. The door doesn't shut properly on that...

A friend ran a 150w hid kit as his headlights, which was atleast twice as bright as his standard high-beam lights so many people so many mad, r u mad brah?

cheers, will cable tie it out of the way :) this is where the pipe goes

its fixed, maf sensor had a piece of paper restricting airflow the guy i bought the car off didn't check rubbish in the mesh, thankfully it didn't cost me a thing to fix, now it hammers

Hi guys, it is a USA CBM, it came with the car only about 5 times for the time of 5-10 minutes it came good with full power in the last 4 days, but then it runs rough and doesn't have any go

put it on a scanner and came up with fuel is lean or something, like it wasn't getting enough fuel to the engine, so that was the reason for the SVS - service vehicle soon chime coming and going all the time... the oil pressure sending was/is working correctly no other faults the injects are...

Hi guys, I recently bought a 2005 vz ss 5.7LT its stock with no tune, it just has a 6LTR throttle body and adapter kit to suit the 5.7,,, I bought it knowing it is running rough(it comes and goes, just as much as it runs rough, so about half the time) and the fact I have access to a scanner...

bought the car used, only within the last 4 weeks i've noticed it... and i don't thrash it at all(not a p-plater ) :) its not bad, but i guess it'll give me a reason to put a v6 supercharge in it if it gets and worse :-/ it has a towbar installed on it.. can you elaborate on this part pls "...

My vy v6 is blowing smoke .. not much ,, but sometimes if i give it a quick rev a little notice a little trace of blue smoke,... but it doesn't happen all the time I did a scan on it when the engine chime came on (and it came up with exhaust sensor) is it possible at all that it could be an...

went for viv and they said the wheel specification is out.... wheelbase measurements: Specification: 2789 mm LHF - LHR: 2801 mm RHF - RHR: 2791 mm any ideas what could be wrong??

fixed it... got the air out after a while lol

hi guys i have a 2003 vy berlina today i changed 2 front brake lines (for viv) and i used 1ltr of fluid trying to bleed the brakes with assistance of a 2nd person but the pedal still goin to the floor there is no leaks, and if air is getting in, shouldnt there be leaks?? i bled each...

even when after i stopped the car, i find it very hard to go into 1st or 2nd when there is pressure on the box even with the car turned off and i roll it back and force its hard to go into gear

Hi guys, so i bled the line for the clutch, and finding it impossible to shift into 2nd or 1st when slowing down, it will only go in once i'm stopped.. and some times hard to get into 2nd, but every other gear is fine.. does it require more bleeding(did it 3 times) or could the be air getting...

ITEM: 1998 GLX/GLX-R Mitubishi Triton, 5 SPD Manual, 4WD - Turbo Setup PRICE: $6,000Neg or SWAP for gen3 6spd manual sedan LOCATION: werribee, Vic YEAR: Year model of car (and build month if possible) SERIES: Example: Triton BADGE: Example: GLX/GLXR ENGINE: 2.8LTR Diesel...

I can parent directory google and get most of the files i want or through netbios anyway, just because megaupload is down, there's a lot of other sites, like rapidshare, fileserv, etc.. etc.. fyi: nothing in my post is illegal, so no one should be whining also, it would be very hard to stop...

ITEM: Holden VR Calais 1994 5 Speed manual, sunroof, tinted windows, IRS Can fix up or use for a manual conversion, this manual was fitted about 2 months a go, and i have not driven it much since, i had plans to fix it up, but no longer have time to do it in the short term PRICE: 900 FIRM...

ITEM: Reconditioned Alternator to suit gen3, never been used LOCATION: VIC, werribee CONDITION: used reconditioned item PRICE: 150 DELIVERY/PICK UP INFORMATION: pick up, or i can deliver within 50km for an extra $30 PAYMENT OPTIONS: cod, banktransfer CONTACT DETAILS: Email, PM...

everyone has a weapon without even knowing it it's your car, now start mowing your attackers down that made me remember, an employee threatened a boss at my work with the "if i see you on the street i'm going to run you over" - lol he got a written warning

I'm not whinging, I have my full license Just when I thought the law caught up to him, he dodges the bullet. Don't get me wrong, I don't give a 5h1t, because I'm certainly not a saint, it's not that he is a bad driver, it's that he doesn't give 2 5h1ts about road rules.. he has his own personal...

ITEM: WTB VR ULTRA Low springs to suit IRS LOCATION: VIC CONDITION: good condition second hand PRICE: DELIVERY/PICK UP INFORMATION: I can pick item up PAYMENT OPTIONS: cash on pick up CONTACT DETAILS: PM OTHER INFO: These have to be ULTRA LOW (SSSL lower the better, so...

ride on the bump stops, it's the most comfortable option out of the lot, and it doesn't cost a cent

how does this work? and how did this happen? my friend was losing his license in VIC, moved to QLD, they put him on full license even though he is Victorian P plater Im mad -_-

no I tightened it firmly, I could have nipped it up a little more, it wasn't leaking for 10 minutes, than when it got at operating temp it cracked, theres a hair line crack inside the casing beside the pulley.. either they've got it back from another customer and sold the thing as a brand new...

old pump was leaking from the gasket, guess what.. i put it in again, and it must of been leaking from the pully too! fkn thing i've never hit a car so hard, i was this || close to smashing the whole car up with the hammer im over it, gonna go back to the shop where i got it from and give them...

i got a brand new key head including the tune in for $50 for my old vy :D

car trolled me, got warm and cracked the water pump - i didn't even tighten the thing, soon as car was half temp, im like ahh.. hello timmy, i see what you did there...a crack! - never buy cheap, you get what you pay for put the old water pump back on with new gasket x_x

i just used some cheap bursons black glue, can't think of the name, comes in a small white bottle, i have some of the clear glue that smells like vinegar( i love the smell of it - sniff sniff)

is vehicle speed sensor fault related to perhaps the abs speed sensors? before i put my car to manual , i had no reverse, and it would also flare out when changing gears you should take it to an auto electrician who can check it in detail on the computer any other faults with the auto

haha, it took me 20 minutes of using a scraper , and 5 minutes of using a wool drill piece to shave the rest off and make it flat, at least the next owner will spend a whole week on it after i finished with it

my pet hate is the absolute abomination in the gene pool the amount of people that sit in the right land making me UNDERTAKE Them, now don't get me wrong, I'm not a do gooder, but its an inconvenience to me to undertake them(they're breaking the law just as much as I am when I undertake them)...