Search results

What about these kits for sale. Straight bolt on https://www.facebook.com/190218500996434/photos/a.343828515635431.89461.190218500996434/1027278727290403/?type=1&theater

After calling Holden roadside assistance last week because we couldn't start the car i found out our 06 SS battery went flat without any notice at all but then had to call 4 auto shops and one Holden dealer (who still hasn't got back to me) before i found one at an auto electricians shop who...

Go to a brake specialist mate best bet

RACE BRAKES SYDNEY 02 9609 1101 :thumbsup: OR [email protected]:yeah:

Again bendix advance but if you want something else you can't go past the Protex ceramic pad it has a full pad face and doesn't squeak and minimul dust bought from race brakes sydney for $50 a set 0296091101 awesome

The fronts should fit with new hoses and hub adapters but the rears won't due to the handbrake being different and i think the way the calipers mount.

Mate I suggest you get in touch with a qualified brake mechanic you obviously have a problem because if you don't know how to bleed the brakes then i can't see how you can fix it.We all could be guessing what is wrong with your car for ages.

Thanks-But that didn't work i will just use pen and paper for a while.

How or what is happening on your car for you to know its the CAS .

Could this be. I tried to reset the mode button back to zero to see how many km's we do a week and how much fuel i am getting out of a tank and it won't rest to zero.Can this happen to only one mode control as all the other features seem to work? Thanks anyone

Mate found it was just as cheap to go to holden and get my new key and get it programmed to the car.If the key isn't programmed to the car but to a faulty key for example you will have problems this is what happened to me but may not happen to everybody.

Had the same problem and had a new key coded to the car.Fixed it straight away then i bought a VX 3weeks later same thing .Hope this helps.

When the booster goes your pedal should be hard as you don't get the vacuum assistance and when your master cyl goes your pedal normally goes to the floor or you may have to pump it a few times to build the pressure up.Is this similar to what you have? In some early cars when the diaphragm goes...

Save up and put 330mm rotors and twin piston calipers on that will make a difference.The VL turbo stuff has only a minor advantage with the 290mm rotor and the fluted caliper it still takes the same brake pad as your stock calipers.

Shudder Had a VR that had the same problem and from that model on it seems to be very common .VT onwards is a big issue as well ,sometimes if the pads aren't bedded in properly this happens and some people say its because the wheel bearings are now in a sealed hub but try this link from Disc...

Is the booster leaking?are you sure its goooooooonnnnnne The std booster is fine but if you have bigger brakes and want a better pedal feel get one that has been upgraded when reconditioned .Race Brakes Sydney sell them exchange.

Is your car a V6? as the V6 had a dual mass flywheel and if that is stuffed as well this will cost a packet if not covered by warranty.

brakes vt If you fit the VT brakes on they will fit under a 15" wheel the next solution is go to RACE BRAKES SYDNEY and get a twin piston upgrade with PBR sports calipers and 330mm rotors and you won't need hub adapters as the rotors will have the disc and hub all in one like your original...

Mate ! Best thing to do is get a qualified brake mechanic to check .Matt over at Race Brakes Sydney can help.Most people are saying check your booster or vac lines and someone said about if it is hissing its the master cylinder. WELL just to let you know any hissing noise is a vacuum leak (not...

Vb-vp To Vt You will need hub adapters and they will need new wheel bearings they fit straight onto vb-vp stubs.The vt rotors fit straight over the studs and you will need new longer hoses to fit up the calipers, the 1" master cyl helps give a better pedal feel you can also do a booster...

Try these guys at Living Low Customs www.livinglow.com.au or 0410429509

The PBR package will fit only 17" wheels or larger most brake upgrades for your car are the same . race brakes sydney have heaps of kits available i suppose it depends on how much you want to pay i had twin piston calipers with 330mm rotors fitted on the front only.