Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. L

    Trimatic wires?

    Really? I cant find any info on it???
  2. L

    Trimatic wires?

    Thought that was on the shifter? But thanks
  3. L

    Trimatic wires?

    Hi all, I was just wondering if anyone could tell me what the two wires to a VH trimatic were for? I know the Orange one is kick-down but what is the black one for? It goes to a "sender" but i cant find any info on it and a replacement tranny doesn't have the same "sender" Old one...
  4. L

    Vt Central Locking

    has no one ever tried to wire an after market remote to the central locking on a VT,VU,VX,VY,VZ and possibly earlier? i am thinking that Green would go to ~ BR-O And white would go to ~ B-BK The others i can get, just need to know if its neg trigger or positive. Maybe
  5. L

    Vt Central Locking

    Noone has any ideas?
  6. L

    Vt Central Locking

    Hey guys, I'm wiring up an after market alarm on vt on the weekend and just wanted to make sure about the wiring for the central locking, can some1 help me connect the dots please? Thanks...
  7. L

    my vk berlina

    Been done, but would look cool
  8. L

    Busted!!

    Cant agree more
  9. L

    Snatch Strap tow?

    it ended up that i used a rope, Only because it was literally under 250 meters,
  10. L

    Worn lifters ?

    Thought there might have been a bit more to it...
  11. L

    Busted!!

    Gratz on 12months without a lost point:rockon::rockon::rockon::rockon:
  12. L

    New Knocking sound.

    why wont it work on ur heads?
  13. L

    Snatch Strap tow?

    Is it illegal to tow a car with a Snatch Strap or rope in Vic? Are there limits or permits I need to do so?
  14. L

    Busted!!

    A big fishy the day i got my p's, Got off with a warning, but the unmarked coppa scared the crap out of me. I like to think im a little smarter these days
  15. L

    New Knocking sound.

    I forth big end, Car is F****D, Just died the night before I start back at work after hollies... lol Stopped dead and wont crank, sitting at the end of my street. Thanks for the help guys
  16. L

    New Knocking sound.

    i have had a listen, and i will be pulling intake manifold off on friday, yes i reused the lifters, but on the same lobes. i was told if it was bottom end i would have had earlier signs, it happened last night, No noise into roundabout, lots of noise out...( and yes i did stomp it btw...)
  17. L

    Worn lifters ?

    Thought they might have been
  18. L

    New Knocking sound.

    Also the third rocker back from the front on each side was dry...
  19. L

    New Knocking sound.

    There was oil splashing around, just didnt see it in the vid, i dont think it is bottom end because it happened all of a sudden, the noise defiantly seem like its at the top. Almost reminds me of just noisy tappets
  20. L

    Worn lifters ?

    I just found a spare set of holden hyd lifters and noticed 2 of them were different to the rest. Is this normal and if so where do they go? The ones on the right are what I thought was normal.
  21. L

    New Knocking sound.

    I have developed a knocking sound that i thought was coming from under the rocker covers, I rebuilt the motor 1 week ago and it has done 200km since. I made a vidio so you can hear it rather than trying to explain it And I am hoping that it wont be anything too bad because I go back to...
  22. L

    my vk berlina

    That sounds very clever, It could even be wired so that when shorted if the batt is not flat it will open and if batt flat just add power... Dammit now you got me thinking... ON A FRIDAY NIGHT!!! lol looks and sounds good but.
  23. L

    my vk berlina

    would you need an override switch or cable in case the battery goes flat or remote gets wet? I was thinking of doing the same to the VH...
  24. L

    Flash Lube

    I use it in my 83 VH and 75 HJ As far as i know, it does the job lead used to do and lubricates the valves and upper cylinder, it is recommended for cars designed to run on leaded petrol or running gas that need the extra lube up top.
  25. L

    vr cuts out on right had corners v6 wagon

    i have heard of two things causing this, 1st was a ball in the tank (cant remember if it was ping pong or golf ball) that was put there as a joke- was in a vp SS 2nd was fuel pump wire earth not connecting properly,- this could also explain you gauge reading wrong. i would check your wires first
  26. L

    What pets have you got?

    one Black Rabbit named "Thumper" one German Sheppard named "Brock"
  27. L

    Need help

    lol then you can blame him if all goes wrong... :D
  28. L

    Flash Lube

    dont think it would hurt, but prob wont make it any better
  29. L

    are oversized wheels ruining the look of old cars?

    16" for the max, i have a hj that is getting a set of vs stato wheels, defiantly wouldn't go bigger
  30. L

    Need help

    try google-ing it i got on amplifier you'll notice two different input leads. a high and a low. most of the time the high side will have small screws to it, and the low side has RCA jacks. the reason is when using the high side this is for a higher wattage input. in other words speaker wires...
  31. L

    Need help

    you can wire most 4 channel amps to the wires insted of the rca's, i belive that it is called hi-input.
  32. L

    Need help

    in short... yes
  33. L

    Dahh... Oops

    well there is a new one going in today, i hope this is the last time the engine comes out this year... lol
  34. L

    Dahh... Oops

    nobody has any ideas? I don't want to put it all together just to be doing the same thing in a months time...
  35. L

    Dahh... Oops

    I no this is an old post, but what can cause this? 2nd one in 2 months, i will get some pics tomorrow, although they will look the same but without blue paint, but the exact same thing has happened with a different torque converter in the same car. and this time i know everything lined up...
  36. L

    Custom Grill

    Have you got a pic of it?
  37. L

    MDF spacers

    lol, the resin would be the only cost, but i think you might be right, Floggin' a dead horse, hey?
  38. L

    MDF spacers

    Thanks again Ari666, I was mainly wondering as i work at a Laser cutter and was looking at making some pocket money, Yes i was going to try one out on my car, but i dont think i will bother now. What if i was to "seal" the mdf? Like a resin, silicone or paint?
  39. L

    MDF spacers

    Has anyone ever tried to make carb spacers out of MDF? If not why? It would not transfer heat, and is cheap and easy to make...
  40. L

    The VW and the Rolls

    Lolz, i like :)
Top