Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. S

    plenum spacer/s, are they worth it?

    This is an old post but I thought I'd throw in my 2 bobs worth. I put a 25mm spacer onto my VS V6 5 spd (with extractors). Before it went on, the take-off seemed a lot gruntier, with the spacer on it seems to have smoothed the engine. I was still beating everyone away from the lights, but things...
  2. S

    Rattling Noise Changing Back Through Gears - VS III V6 Ute 5 Spd Manual

    Solution! It turned out to be the universal causing the noise (the drive shaft must have been rattling around) - I changed the CV and centre bearing as well, so the beast has lost it's old familiar rumble (or maybe grumble).....
  3. S

    Rattling Noise Changing Back Through Gears - VS III V6 Ute 5 Spd Manual

    When I change back through the gears, there's a rattling noise coming out from under the car - it sounds like a piece of tin flapping (no, it's not the number plate!). It happens at both high and low revs, in all gears. And when going up through the gears there's sometimes a similar one-off...
  4. S

    Cracked head

    I just did a head gasket replacement - but as I was putting it back together I realised it was the inlet manifold gasket that had been the problem all along (I picked that up off of a guy on uTube). We live and learn....
  5. S

    Dipstick Needs Help

    thanks guys. I pulled the extractors off/back and there it was!
  6. S

    Dipstick Needs Help

    I've just replaced the head gaskets on my Series 3 VS, during 'the 'unbolting' the dipstick came out. Buggered if I can work out where the hole for it is, I've checked another VS and see it disappearing through the manifold but haven't had a chance to jack that one up and have a good look (I...
  7. S

    Do I Have to Worry About Timing When Replacing VS Heads???

    (Following the Gregory's manual) I've successfully removed the heads from my 3.8ltr Ecotec, I've got a gasket/bolt kit, had the heads checked out, and am ready to put it back together this weekend (I've never done a head gasket replacement before, but it all looks pretty straight forward)...
  8. S

    VS Using Water - Boils When I Stop

    My V6 VS isn't overheating, but shortly after I stop water boils out through the header tank - I lose about 1 litre/day. I changed the radiator cap on the weekend which seems to have made it worse (more pressure in there I guess - I put in 3 litres this morning), my next best guess is to...
  9. S

    My VS V6 has poxy fuel economy!!!

    Depends who's driving - and where If I'm driving to work (150 km round trip mostly on freeway) I can squeeze 600km+ out of a tank. If the missus is driving locally, 400km is about it.. That's in a V6 Eco
Top