Search results

Hey all. I have a VN, I have put a VR motor in it and have stroked it, 030" oversize, Heaps of head work, port matched everything, 70mm throttle body, CAI, 3.55 LSD etc Here are the Cam specs Duration @ 050" is int-222, exh-232 Lobe lift - int-.317, exh-333 Valve Lift - int-.507...

Hey all. I have a VN, I have put a VR motor in it and have stroked it, 030" oversize, Heaps of head work, port matched everything, 70mm throttle body, CAI, 3.55 LSD etc Here are the Cam specs Duration @ 050" is int-222, exh-232 Lobe lift - int-.317, exh-333 Valve Lift - int-.507...

So GEN3 injectors will fit straight in, no hassle. do you know what pressure there run under thanks

so mate, what injectors would you say. how much better are later model injectors. anymore info on injectors would be great thanks

Hey all. I have a VN, I have put a VR motor in it and have stroked it, 030" oversize, Heaps of head work, port matched everything, 70mm throttle body, CAI, 3.55 LSD etc Here are the Cam specs Duration @ 050" is int-222, exh-232 Lobe lift - int-.317, exh-333 Valve Lift - int-.507...

hey mate, i have a stroker 6 as well. im going to get it tuned in a wwek. just wondering what you have done to your 6. details would be nice. thanks

Hey all. I have a VN, I have put a VR motor in it and have stroked it, 030" oversize, Heaps of head work, port matched everything, 70mm throttle body, CAI, 3.55 LSD etc Here are the Cam specs Duration @ 050" is int-222, exh-232 Lobe lift - int-.317, exh-333 Valve Lift - int-.507...

yeh thank heaps for the info guy. i have been reading that the Formula Holden motors make 340hp+ N/A and they run the standard delco as well. thanks again all

hey all, I have just Stroked my VN V6, i am just wondering when i go to tune it, will the standard computer/memcal be good enough to get the most out of the tune. also who would be the best around "Brisbane" for tuning. thanks everyone.

hey guys, just wondering if anyone could let me know who they think is the best tuner for VN S1 V6 in Brisbane thanks

hey guys, just wondering if anyone could let me know who they think is the best tuner for VN S1 V6 in Brisbane thanks

hey all. just wondering if anyone could help me. i have a VN series 1. when i get up it it starts to break down. it gets to about 3000rpm and doesnt rev smoothly. ill be checking the crank angle sensor today, but i have replaced the coil pack and the DFI module looks good. any idea why...

hey all, I was just wondering if anyone knows if i can take my standard non LSD and change the gear ratio and change it to an LSD. If so, how much about would that cost thanks guys

garfa, what jaycar amp would you recommend for these two subs

hey all, i have 2 12" MTX 5500 (T5512-44) (300RMS/600MAX). i am just wondering what amp/amps it should use. thanks alot everyone

not finished yet guys, thanks for the replies about my car, its not finshed yet. i only put the a mag on the back to see what they looked like. i just had the exhaust done on saturday (28th oct) i will post more pics when it is fully finished. thanks again everyone.

hey everyone, i have been doing up my vn for about 8 months and im just wondering what everyone thinks thanks alot everyone