Search results

get some wire about 3mm, put it in all 4 holes in the front of the head unit and the head unit should pull out.

My ute was making knock sounds fron the rear turned out to be the spare wheel was loose. Hope yours is as simple as that.

http://www.jhp.com.au/index.php

All you need to know is in the following link http://forums.justcommodores.com.au/showthread.php?t=14687

Hi Guys, I got the power for my camera ( also in a VU) from the trailer wire harness. White is earth, Black is reversing lamp (+). Only helps if you have a tow bar.

CAT-09 will work with Eclipse H/U's if it uses remotes RMC105 or 1802, Same as Kenwood you will have to use the the infra-red LED

Hi SIRSP, If your head unit uses a RC410 or a RCDV100 remote (part numbers) the CAT-09 will work with the infra red LED, I don't think it can be hard wired with Kenwood head units.

Thanks for your comments. Once the cards recover from xmas i will get something happening with the suspension. Pedders have got a workshop around the corner from my work but i'm not to sure what to do with it, if you got any ideas let me know.

Hi Guys, Thought i'd introduce my ute to you all. It's a 2001 VU S that i have had from new, But only started doing some mods about 6 months ago. Speedy Sphere 18" with Yokoharma AVS DB V550'S Alpine IVA-W200E DVD Head Unit Alpine PDX 150w X 4 Amp MB Quart 6.5" Splits (Doors & Dash)...

Hi Donkeey, Attached picture is from a Gregorys manual. Looks to me Like X (light Green). Hope this helps.

Hi Guys, I got my leds from http://www.illuminateyourcommodore.com/ come with good instructions that cover removing the dash to soldering the leds in place. Took a few hours but wasn't hard.

Found the instructions for the Cat-09, "By replacing the infer red led with a 3.5mm mono plug the steering wheel interface can plug directly into the following Alpine head units. CDA-9851 CDA-9853R CDA-9855R CDA-9857 CDA-7998R DVA-9965E DVA-9860E DVA9861E CVA-1014RB...

Just put a Cat-09 in my VU with a Apine IVA-W200E head unit, I cut off the LED Solderd on a 3.5mm mono plug that plugs straight into the back of the head unit. Works great very happy!