Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. R

    VT wobbly window winder slipping (teeth not worn)

    Hi guys, this problem is a little blue washer/sleeve that goes over that winding pin on the inside. Holden will be the only ones who will replace it unless you go to a pick and pull wreckers. Mine has just broken and I'm having real problems getting the window up and down until I get my hands on...
  2. R

    Window winder VT

    I found that the problem was inside the door. There is a little blue sleeve that holds the winding pin in place so there is little to no movement. If this breaks and falls out your window winder has lots of movement. This little blue sleeve is smaller than a five cent coin and slides over the...
  3. R

    Passenger door lock siezing

    My mates VY equipe series 2 has the lock not working with the rest of the central locking system. Does anyone know what could cause this problem.
  4. R

    ENGINE light, ABS light, TRAC OFF light AIRBAG light and OIL light

    Jamie, I fixed my ABS module yesterday to a degree. I unplugged it, re-soldered the pins in the back as the dry solder had worn and become brittle. I had Engine, ABS, Trac Off, and Oil lights all on and now I have just the ABS and Trac Off lights on....so I've done something right so far. Maybe...
  5. R

    ABS Module - replace repair

    I fixed my ABS module yesterday. It's technical but easy once you've done it. It's the dry solder in the module itself. After around 130,000 km the solder becomes brittle. Just re-solder the pins in the back and you're back in business.
  6. R

    ABS, Engine, Traction Control and Airbag Lights

    ABS module repair I had problems with my ABS module, I soldered the pins in the back of it and have eliminated 2 lights on my dash, Engine light and Oil light. The ABS, and Trac Off are still on but the Trac Low is flickering for about 15 seconds then goes. Does anyone know what this is...
  7. R

    Ask the EX-Holden Technician

    Did you check the crank angle sensor, they are always shitting themselves in VT's.
  8. R

    Ask the EX-Holden Technician

    Thanks, I managed to get my hands on a one man bleeding hose. It worked a treat. Thanks for your help.
  9. R

    [VT-VX] How to: Change pads and rotors.

    I'll give it a go, but I was worried that air may have snuck back in when I was bleeding the brakes. Could this be possible. I'm just frustrated with this crummidore. Could it be as simple as unscrewing this thing you said.......Fingers crossed.
  10. R

    [VT-VX] How to: Change pads and rotors.

    Yeah I originally didn't, but my master cylinder was stuck and wouldn't go back in. The useless mechanic I called said bleed the brakes ......so I did. Thanks for nothing Tyre Power. Anyways, I'm not getting pressure when the car is on. What am I doing wrong. What did I miss.
  11. R

    Ask the EX-Holden Technician

    Bleeding Brakes What is the correct way to bleed brakes on a VT Commodore, step by step?
  12. R

    [VT-VX] How to: Change pads and rotors.

    I have just replaced my front brake pads. The brakes were bled but now I'm not getting any pressure at the brake pedal. What am I doing wrong? A step by step tutorial would be handy if anyone has the time.
  13. R

    vt codes

    Error codes I may have found these nifty error codes but how to determine what they mean is tricky. I found that t00 nu or something that looks like that. I get to code 24, 25, 26 and they have this -- next to them. WHAT DOES THIS MEAN?
  14. R

    VT - VX Faults

    it's probably your purge hose connecting to your throttle body....a little thin hose.
  15. R

    VT - VX Faults

    Code on VT I managed to find a little trick to my VT, I press MODE button+the UP button together and just MODE alone, and I have a few extra features. I am wondering whether anyone can tell me how to find the section where codes will appear to tell me what is wrong with my vehicle. If anyone...
  16. R

    Yes, It was the ABS Module

    there is a place in Melbourne who do it for $170.00, I have a mate who is gonna send it away. There is also an auto electrician in North Parramatta who does it to.
  17. R

    vt codes

    How do I get these codes from the computer in my VT Series 1. I seem to have an ABS Module unit **** itself, however, I'd like to see if anything else has gone with it.
  18. R

    How To Remove A Vt Spack Head Unit...

    is this for an acclaim aswell, I wired everything as described, and my ignition wont work. The fuses are all ok, I have reds but it just wont turn on....neither will the new stereo...plz help.
  19. R

    VT swaybar links

    Nearly there I have the pin in, but I can't do up the bottom nut because there is not enough thread to catch on to. Is this common.
  20. R

    VT swaybar links

    I am having trouble replacing my Swaybar link pins. Do both sides have to be jacked up and level for the pins to go in the slot. I seem to remember if both sides are up it helps the cause. I am out by about 1 inch and there is not much room left to jack up. Any advice will help.
  21. R

    faulty dash lights

    $792.00, cheaper from this place in parramatta $160
  22. R

    VT Acclaim

    Thanks for that. I spoke to them and they are gonna fix it for $160.
  23. R

    VT Acclaim

    VT ABS Module Is this an easy fix problem for me to do at home because I can fix cars, or is it better to call an auto electrician, and roughly how much will this module cost.
  24. R

    VT Acclaim

    My Engine light, air bag light and trac off light are all on and the fan runs constant when they're on. Can anyone explain what is happening?
  25. R

    faulty dash lights

    My engine light, air bag, and trac off lights are coming on and the fan runs constantly while they are on. I had a dodgy thermostat, fixed now. What is this problem caused by and how can I fix it.
Top