Search results

Thanks for the help here, I was able to buy and put in my new radiator easily. They are plug and play, so easy. THanks agian.

Thanks for the tip and the green wire int he first plug, that tip made my job real easy. well once I got the kick panel off.. I still havnt drill the hole in the back bumper, ran out of time today as other people came in and needed stuff done. I also unplugged the wire to the antenna aand...

Great info about removing the dash, thanks. I followed the dash removing instructions to help change the stereo. Even though I probably didnt need to remove the dash to do so it was easier to run wires and find the handbrake wire. Yes there was no need to wire the dvd to the handbrake, I am all...

So there are only speakers in the front and rear doors and not the parcel shelf?

so I bought the 3600dab, double DIN, where do you get the fascial kits from? We have a VZ berlina

Bummer i just bought the harness for this head unit and I asked for a commodore harness, we have the berlina with steering wheel controls.

The tool that I made, made the job really easy, it didnt bend the pins, the accident bent the pins... THe tool was made out of 20mm pipe with a "V" cut into one of the edges. Slip the "V" onto the pin then either hit up or down depending which pin. reverse the pipe for tapping the pins back...

Well I changed the door today thanks for your help.. I made a tool to bang out the pins, although they are bent too so they will need replacing one day.. I used my gantry to hold the weight of the door to take it off, then gantry and wife to help put the new door one, well to hold it in place...

changed the VZ drivers door, took the dented one off and put a straight one on. took all day, but got the job done. I didnt have to remove window or regulator so that was good, just a few things and inside panel Peter, iPad with IOS 7.0.6 using Tapatalk HD

I need to replace the drivers door that she wrecked, I noticed that there is a pin on each hinge, but its flanged at the bottom. do i just hit it up or do I have to squeeze the 2 halves together first then tap it up some how.. and where are the plugs for the electrics, in the door or kick...

Very nice well done.. Now the hard part, looking after it so it stays that nice. Peter, iPad with IOS 7.0.3 using Tapatalk HD

Thanks Peter, iPad with IOS 7.0.3 using Tapatalk HD

Took it to holden to get the computer plugged in to tell me why it was beeping the Service vehicle soon alarm all the time. he said 9 times out of ten its the oil pressure switch, and after paying him $50 he then confirmed that yes it was the OPS. So can someone please reply with the link...