Search results

Hey guys, Got car back from mechanic turns out something was caught up around the throttle sensor or something. And the car was running @ 48% throttle he found the issue and now runs at 98% throttle. So much better. It does have a bit of a rough idle so i might also try cleaning intake and...

thanks heaps andyman, do you think the problem of not going past 4500rpm could be a computer issue? or the fact it stays in 2nd and wont kick down to first? cheers guys

yer il get photos tonight , the oil is coming from the piping from the pcv valve which is on the passenger side of the motor and goes in the intake pipe therefore there is oil around the entry to the throttle body which i have already wiped off. Probably should have got a photo of that first! So...

yer to me the shift and kick down sounds like a computer thing?

Thanks for the reply guys, I have car booked in for tommorow to get serviced as its dues for its next one now. Apparently the oil is coming from the pcv valve piping but is comon if car gets a work out every now and then. Hopefully the throttle body clean up will help it and as for the...

Hey mate thanks for the reply, I just looked then and yes its all sludgy, oil was changed about 7000KM ago.. and the pipe that the oil is going into the intake from is the pipe coming from the pcv valve it think.. Could it need a flush or am I looking at more serious problems? Cheers!

My executive has been playing up lately not reving past 4500rpm in drive and not kicking down to first basically just being sluggish i thought it may have been gearbox and got that serviced but did not resolve the problem, i took the intake pipe of and there seems to be oil in the vacumm or...

Personal preference hey guys.. I was actually considering them for my car even no they are not genuine. They would be worth a *** load if they were genuine seeing Holden only most likely has one or two sets for the Coupe60 proto type.. But they are pretty good copies if you ask me.

Hey after a set of headlights for my VZ Commodore out of either an SV6, SS, or CALAIS PM or Post price here and il get back to you Cheers!! ITEM: VZ SV6, SS or Calais Headlights LOCATION: Victoria prefferably or may pay to get them posted CONDITION: New or Used in good condition...

How much for man? And what they come with?

The two mm just gets machined of the inside of the wheel mate so the wheel sits back in properly

Just the normal size wheel nuts mate :thumbsup:

hey mate sorry springs sold.. yer they about cm higher or two then same spring thats not heavy duty cheers

bump .... make me an offer

Bump - $80 or nearest offer

ITEM: Rear King Springs out of VZ Commodore -Part No - KHRL-46SLHD LOCATION: Shepparton, Victoria CONDITION: Used in car for about 2 months PRICE: $80 DELIVERY/PICK UP INFORMATION: Collect or can post at buyers expense PAYMENT OPTIONS: COD, Direct Deposit, Funds Transfer...

only up to december 05 execs etc got the trollet strips and alloytec badges.. 06 models up had no badges and strip down side.. holden got tight lol.. i have the lukey system on mine its on there web site and it twin 2 & 1/2 into single at rear sounds not to bad could do with pacemakers though

Hey guys im about to buy a new jet ski and sick of using the old mans car for towing so was wondering is it possible to get a tow bar fitted that i can unbolt the tongue/ ball section or whatever its called and place the cap back in or not possible? Just wondering if anyone has had it done Cheers

Yer i might take amp back and see what they say mate.. cause the amp running the speakers has no issues. I heard it could be because i am using my factory head unit and high to low convertors

Thanks guys .. No havent upgraded battery earth but i heard it could be cause i have standard head unit and using hi to low convertors? Thanks BANKS that would be good. It didnt do it a bit yesterday than i turned headunit of at the lights and it did it again full vibration had to go pull over...

Hi guys i just finished installing a second amp into my car and a pair of 6x9's. Its an 800wrms Monoblock amp and the 6x9's are 180w Pioneers or something. I already had a Kenwood 350w amp running a Kenwood 12inch sub. So this is how i wired it.. i have two power cables coming from the battery...

Hi guys i just finished installing a second amp into my car and a pair of 6x9's. Its an 800wrms Monoblock amp and the 6x9's are 180w Pioneers or something. I already had a Kenwood 350w amp running a Kenwood 12inch sub. So this is how i wired it.. i have two power cables coming from the battery...

it really wont effect the ride height that much but you could prob get front and rear for $50 i wouldn worry bout the shocks

genuines pre machined to suit..thats wat i got 12 months ago na should look ok till u get it lowered

Panel beater would charge 100 buck or 150 max to paint them looks better i think just dont try take them off to much of a job to get it right! Paint them for sure

Lowered springs mate stiffens up your ride for fairly cheap or you could get serious and go adjustable coil overs all round but your getting in to $$$$ then.

All depends how much you want to spend mate I reckon just get some rims get same springs as whats in mine at the moment if you like the height and yer to save you cash in long term it a camber kit fitted and a full wheel alignment. I reckon your looking at about 750 - 800 bucks for a shop to...

how much would a shop charge roughly to fit new diff (lsd) with new gears i looking at buying a reco one.. cheers

FE2 sits about 1.5 inches lower than STD Suspension supposedly. also shorter shocks than standard. I have wats meant to be SL in the front and SSL in rear of mine and evens it out a bit still not low enough though needs SSSL. Heres a pic to show you how it sits on 19's mate and i havent...

Hey guys im after a set of King Springs Ultra Lows for my VZ Sedan so just seeing if anyone has any lying around.. Part No: Either KHRL-46SL OR: KHRL-46SSL Will pay postage if interstate or pick up in Vic. Let me no and how much you want for em Cheers obr1en

Yer mate get an exhuast, mcai etc etc and a tune.. Or at least do the mcai/two hole mod it gets rid of electric car noise and gives it a deepish roar when throttle opens up.. I was goin to get tune but car of road at the moment and contemplating a Raptor charger so will make my mind up on that...

Sure they dont have the low down torque of a Ecotec motor but I think the alloytec motor are much funner to drive you just have to no how to drive them ahaha and where the usuable power is.. I have a mate who has a VY S Pac ute with CAI, exhaust and few other lil peices and of the line he pulled...

The berlina front bar is completely different again much better of goin for a new front bar like the SV6/ SS Bar or SVZ bar will look much cleaner and you will have no hassles. Also the VZ's dont have the relay in there ready to plug the lights into so add in the wiring costs and the switch from...

hey mate have you got part numbers?

Yer i love the look of them so i reckon i might get them all resprayed or something... Either that or go twntys

Not sure if you mean more photos of the car or the car how it is now... But the car is in the my ride section : http://forums.justcommodores.com.au/vy-vz-wk-wl-v2/77310-my-vz-executive.html Will get some more crashed photos soon

Na same stud pattern just the VE wheels need a bit shaved of the inside to make them fit pre VE Models.. Its not a big issue.

Yer mate she is fine just a bit shocked I was in the car with her to but yer no one was hurt so all good... Yer they i will try get repaired what needs to be and maybe might need to replace the wheel that took all the gutter impact...

i didn have the wheels covered so not sure wat will happen there.. i might be able to get them repaired like stripped and resprayed the ones that are only stratched...

Anyway the missas had a bit of an accident (fairly big actually) in my car on weekend and at first panel beater thought it was a write of but it is repairable and its looks like all my wheels are buggered so wondering what people think whether i should get new wheels all together or get the SSV...