Search results

My understanding is the caprice definitely had BT mate. Maybe the Bluetooth module is missing from above glovebox as suggested? Check that as first step. If you pull down sunglasses holder you should see the wiring in there for mic from factory. If module is missing I have a spare one here you...

Well it's wired in and working mate thanks heaps for the assist as always!!! I'll just pm you in future haha

Ok so even without that adaptor in etc the interference noise is coming thru as soon as you go to DVD screen. So where the hell is that coming from?? Factory roof DVD /rse and genuine wm IQ....I'm stumped...anyone?

That's freakin beautiful work mate thank you!!! Hope to have a crack at it tomorrow!! Knock off at 0600 get some zzzzzzz then I'll look at it. I've run a shielded RCA cable back for camera +/- so if I loom the brown wire with that should do the trick? I'm going to move it anyway as I think that...

Not yet mate Work and away from car ...sunday should get a look. I'm thrown by that brown wire in the plug?

WN camera is fitted to car now. 2012 model IQ mate from memory. Cheers for the assist!

This is the E3 camera that came on a grange bootlid I picked up to repair my spoiler. See why I'm stumped? It doesn't match anything I've seen colourwise. I can remove the foam covering and look for shielded wire if needed....

Wm IQ with sat nav is what I've installed mate. This pic is the small green plug from the WN camera showing what's there colourwise. I just threw the wiring up for the E3 camera as it seemed strange it was so different mate.

The only thing that's been changed realistically is the series 2 adaptor video plug with reverse cam plug. I'm going to unplug the RCA from that plug when I get home and see whether it's picking up noise thru that bastard.

07 WM. Have a WN mould fitted with camera, also a spare E3 WM camera. That's the wiring colours I have I listed above mate. Hooking up reverse cam to the IQ conversion I've fitted just need to know the wiring colours pinouts for camera so I can tap into loom.

After doing the wagon I've upgraded the wm to IQ also... having couple strange things. It's all in and programmed, running and working well...except for the DVD display from roof mount DVD player. Now the picture is displaying on head unit perfectly (when it works not sure if it's typical ve...

Hey guys, Having issue with reverse camera wiring for the WM...now here's the difference the wm reversing camera has completely different wiring colours to my Ve wagon. Does anyone have the pinouts for wm? At the cam plug on a spare WM camera I have : light green, light blue, white, black...

Yeah man grab the dtcs first. Isolate what cylinder it is. My 09 sv6 has done it couple times and was always a bad plug luckily...

Shout out to double dip, zero or any of the other tech boys, after doing the wagon I've upgraded the wm to IQ also... having couple strange things. It's all in and programmed, running and working well...except for the DVD display from roof mount DVD player. Now the picture is displaying on head...

Shout out to double dip or any of the other tech boys, after doing the wagon I've upgraded the wm to IQ also...now here's the difference the wm reversing camera has different wiring colours. Does anyone have the pinouts for wm? At the cam plug on spare WM camera I have : light green, light...

L77. Can thank autocorrect for that initial post I think, has been posted as l77 every other mention lol

Ok thanks mate. I was hoping the tune might sort the issue I'm ready to burn the bastard. Went with the L77to save money rather than a quick rebuild on the L98 and beginning to regret it hey....if it's such an issue I'll wack a stick in it and be done with. Thanks for the heads up on the o ring...

Ok it's the complete L77, sump to heads, including all internals. All we swapped was the L98 valley plate and L98 intake. (That's what we were advised needed changing) Still L98 pcm/ tune.(were told '11 model pcm wouldn't be compatible with '07 car) Amazing that tuners never picked up that...

Geezus Christ this is a pain in the ass hey. So I have to pop the top and replace them again??

Oh really? Have you got updated copy? Seems strange they would change their procedure.

Having L77 tune flashed in with dod off on Saturday and will run her up and see what happens. If no go then cam swap it is..

As per the Holden tech bulletin : states remove the 8 o rings when fitting std l98valley cover. I left them.in place first up was then informed that would be contributing to the problems, I have copy of tech bulletin here but no way to upload, definitely states REMOVE o rings. Holden was...

Thanks for reply mate noone seems to have heard of this! Holden was useless, I found the bulletin on an old thread on here tonight. O rings have been removed as per bulletin. Hoping the tune may do the trick seems ridiculous otherwise noone seems to actually know what causes the problem I'm...

Anyone experienced this? Rather not fork out for a complete cam swap if a tune will suffice!

Well I thought I'd drop an update for this debacle.... After concentrating on other aspects for past month in the little time I've had free, the car runs like **** frankly lol won't idle stalls etc, after running heap of scans and replacing map sensor (yep threw that code also) and misfiring...

Yeah I wasn't real impressed.,a mate came with his scanner and was pretty quick to find issues what can u do hey...was a happy moment when she fired believe me!!!

Ok....so firstly thanks for the help guys! Secondly..what a cock show, got hands on different scanner went thru thing's again. Showed different tale! Turned out to be two things....ECM had one dicky plug, fixed that then the small key transponder (not PCB) wasn't in key!! Locksmith hadn't...

07GTS and RiCeY thank you both! I'll post results when I run the checks appreciate the help guys!!!

Right so im hoping to get an hr on the car before work tomorrow afternoon! :) Has anyone got wiring diagram for coil packs/ injector section of loom before I start probing everything? I will go thru the TPS etc at same time but want to nail all areas at once. Thanks guys!

Ok thanks man ill retest the earths and feed them a ground worse case, see what results. I wasn't sure whether the earth was switched via ecm etc myself. The tuner is available when he is available if you know what I mean lol on my own mostly with this and one day a week isn't allowing much...

Those dtcs above are the only ones showing mate not getting any others hey. Tho no grounds at TPS etc points towards ECM.or a ground wire off? I've made sure rear of pass head and front of drivers head re both on as is body eartjpassenger side guard etc

07GTS ...Tried crank relearning procedure but security light on dash never appears so that doesn't seem to fit with what I've been told to do?

Now have fuel!!!! But no injector pulse or spark still. I'm lost guys this is shitting me to tears hey. Any suggestions from here?

Current dtcs

And only Engine light, brake, and abs lights on dash as far as warning lights, along with the 4 in centre display as described in original post

Ok finally got to the car. 5v reference signals at both TB and Accel pedal, but no grounds at either???

at work tonight so not near the POS lol Shifter in Park etc, checked all fuses in bay and kick panel. Went over all engine loom again multiple times everything is connected everything looks and feels ok. apart from the two things mentioned previously which I sorted.....should be so simple but...

Didn't have the scan tool onsite mate, just a basic obd reader to pull dtc. Thanks for that! Ill go thru it manually and see what I find and run it past you :)

Ill give relearn a go on weekend but didn't think that would be an issue seeing as it was just the motor itself changed hey?