Search results

so amp works on its own with the speakers.. does the headunit work on its own? i got a feeling its the headunit or the RCA's

from memory you had to earth a wire and than put white onto brown or something.. dont quote me but its quite easy. if you want to make your job easier, get a ISO plug and plug it into your existing loom, and add your eonon loom onto this loom.. i have one here you can have for $10 posted...

why not mount the amp directly on the seat? just use a big threaded wood screw (big gaps) and dont screw it too hard using the drill if you want to hide it.. what about on the parcel shelf? get on your back and screw it to the bottom of your parcel shelf. and if you do build an amp board...

i got one here... but im on really far from you.. if you want it you can have it for $10 posted.

unplug all the rca's and turn the car to acc. does it still beep? try running a... rca - 3.5mm jack lead and run some music off an ipod/similar does it still make the noise? if it does than its the amp for sure. and just bring it back to the shop and get a new one since its new products.

yes you can... you will need a PAC system SWI-X the infrared system. if you want a cheap one.. jump on USebay

you will firstly need a power inverter. 12v -> 240v than get a tv wall mounting bracket, make sure you get the one that locks in and doest not just sit on top of the wall mounting plate. cheap place to get them is.. LCD and Plasma Mounts than run RCA's to the TV to your headunit if you...

what i do is a little dodgy too.. i run a wire from the hand break (not hard to get off the vy/vz) to a on/on switch. one side goes to the handbreak, other side goes straight to earth. trying to put in a mom. switch can get annoying. i put the switch next to the fuse box, so you unclip...

you will also need a facia kit for the jvc unit otherwise it will have a big gap all round. i find it easy to snap off all 4 tabs and than hot glue gun the facia on. also get a ISO for it as it will make your life really easy. with steering wheel controls (top plug), you an get a PAC...

might be the most complicated but its the best result. it sits straight and is pretty much theft proof.. as it takes longer than 15 mins to remove. while demolishing the dash. theres another option.. cut the original bracket straight down with some tin snips, force the cradle in.. and...

bring it back to the installer. if you paid to get it done properly just bring it back.

go to a wreaker and buy another parcel shelf. will cost you about $30.. dont bother trying to fix it as its going to take your a very long time and it wont look anywhere near as good.

i put dynamat behind the number plate.. well on it but at the back.. did not rattle one bit with it in.. then i deveoloped a rattle on the roof trim (dodgy repair by a panel beater after my car was repaired and should of been written off) every car is different for rattle.. i actually...

take off the handle.. and see if the insulator has perished. look for a replacement.. check holden if they sell it by themselves. otherwise look into getting one off a wreak.

why stop ot 1000wrms.. using that alpine would mean running it 100% which is not really recommended. those amps have a a mark 2/3 of the way which say nom. shameless plug im selling a mrp-m2000 if you want cheap power... mines brand new.. and still in original box. 1500wrms @4ohms...

could be a number of problems.. cheap RCA's would cause the buzzing the one that goes with the revs.. clipping could be because there isnt enough power or there is a short somewhere. sound clipping could also be because the earth has come loose/corroded.

since you have 2 chans left on the amp.. look into getting a set of splits up front.. so replace the tweeter and woofer... it will come with a crossover so it will only need 1 channel per side if you do go down this route, then you will greatly increase your high end and also your...

buy my setup.. plently of kick.. and very loud... pretty good SQ when tuned right with decent amps.

with this data showing.. does it mean it only proves that the enclosed boot setup is better for SPL but for volume, will the wagon still come up on top? will the wagon top the sedan in SQ?

where abouts in melb you located? i could help you out if you like.

plenty of space behind the door trim.. i was able to get 10" woofers in my doors as i though 6.5" was not enough.. and with the tweeter.. i put in horns (like night club/PA tweeters) i just like showing it off :D only downside is you they need their own channel (so you need a 4...

installing speakers are pretty straight forward. cut the existing speaker wires, extend them to the crossover. crossover is labeled, so follow wires to tweeters and woofer. choose somewhere to mount the tweeter (top of the door trim towards the front of the car, that black triangle is a...

look at the cig lighter fuse. otherwise where abouts you located? if im close i can come around and help you out.

no you dont need to run an amp... amp will help but you should be able to get away with running just better speakers off the factory headunit. so say you get a new set of decent speakers.. get them installed and you think its lacking power... this is when you would need to add in an amp...

troll ebay... i saw a dd2515 sub on ebay for 300, no buyers.. do some research on DD.. crazy stuff..

how hard is it to put your car on accessories? just flick it on. if your really anal about it then probe that amp remote wire (would be remote for factory amps)

for the vy headunit, the dash does not come apart. get a kit and vy/vz keys, the headunit slides right out. once unit is out use a ISO plug if you dont know what you are doing. you can mount the crossover behind the door trim, opposite side of the crossover (still on the bottom half of...

make sure the earths on the amps and headunit are solid.

you have a few options.. the VE's are very similar to the BA/BF falcons (not the way they are wired but layout) as you can put a aftermarket headunit under everything.. not the best looking system but it works. have a look through www.shoppingsecure.com.au (forum sponsor) and see what you...

i put mine under the dash..(vt-vx) people here are going to flame me for this.. but on top of the air vents (double sided tape - 3M)[vt-vx] when you pull off the facia.. it will still work no problems.. ive had 2 different antennas (two different units) and both have been put in that location...

pretty much any headunit that has AUX in with the 3 rcas (L R audio and a video plug) i have recently put in a clarion tv unit (digital) into a car and the quality blew me away... it was atcually really good.. not cheap at $800+

rejoin all wires, remove the pioneer loom (so you can sell it if you dont want it) simply plug headunit back in (dont forget the antenna) and then slide the headunit back in.. simple as that. what do you mean by 2 figure 8 cables. got any pics to explain what your trying to say?

or you can split it from the back of the headunit with a RCA spliter and run the pair down to the back... i find this to be neater install and if you do ever change your headunit, all wires are there for you.

might be worth getting fibreglass moulds to fit the door trims. (6.5") screw them in... get replacement trims from wreakers (less than 50 a pair) and put in tweeters in stock location

if there is space for the rear speakers why not put some in the stock location... abit of work and you can get speakers in there.. never paid much attention to audio on the SS commodores.. always doing alarms/sensors on them. just make sure you get a decent set of speakers up front, if you...

its a VE.. not as simple as a VZ.. will cost you over 1000 to put in a half decent headunit. it is a new car so try keeping everything stock.. since its a ute,are you planning on running a sub later down the track? i personally would be looking at running a very decent set of speakers...

put a multi meter over the remote cable as you have the engine off.. and see if the current drops down when the amp drops. could also be amp is overheating... could also be car regulator is not working properly.

http://forums.justcommodores.com.au/car-audio/148463-replacing-ve-head-unit.html

ive noticed that you do not need to remove the whole glovebox setup to get to the headunit out.. i find that removing half of them is enough. just do the right side enough to get to.. (far left screw) is all you need to remove to get to the headunit. but awesome writeup.

there is an iphone app (free app) that has over 7000 drinks listed inside.. doesnt tell you how to make it but it tells you whats in them.