Search results

Got one from Carbon Car Systems for my VE SV6 as well, mainly for the same reason as the poster only living a very short distances from work wanting it to warm up before taking off, plus during those really cold winter mornings, its nice to be able to jump into a nice warm car.

Hi Guys, I' am currently chasing an Idle issue with my 04 VY Berlina. This mainly happens when the car is at NOT, it used to just happen with the air con on, but now happens regardless if its on or off. When I'm sitting at lights car in Drive I notice the Revs will bounce up and down between...

Yes obtaining a IP Range and subnet. I' am able to ping our Modem, I' am also able to ping google's IP but I' am unable to ping google.com

I have a DNS issue with a Acer Aspire atm. I have various other machine connected to the network and I have tried various other cables. The other things I have tried are also these Uninstalling and reinstalled the IPv4 Stack Flushed the DNS Reset the winsock Checked the HOST file Checked to...

Thanks for the info, How is the body loom separate in the VY but not in the VT/VX? I did notice a extra plug hanging down near the ECU when I took it out of the VY, I'm guessing this is sort of similar?

Hi Guys, Have just done a L67 transplant out of a VT into my VY. I have already had the BCM and ECU linked together, my question is about the 3 Plugs in the engine bay near the drivers side that were on the VT, are these neccesary in the VY? These are the 3 plugs I'm referring to Thanks Fststig

Hi there, Does anyone know if the L67 harmonic balancer bolt is the same as the ecotec harmonic balancer bolt? Thanks

Try and Ping the Billion modem, I'm thinking its a IP assigning issue as well. I would turn DHCP back on and let windows do its thing, if that works you can try and turn DHCP back off to have them set as a static IP.

Give your Throttle body a clean, as well as your TPS and IACV (The two sensors on your Throttle body) The ECU doesn't generally log a code when the CAS sensor goes, but it is the only sensor behind the Harmonic Balancer. Make sure that you clean the sensors in some CRC Automotive electrical...

Make sure your MAF isn't clogged up with crap, try giving it a clean with some MAF Cleaner. There might be a Dirty injector as well.

Hey Guys, My brother in laws car started getting a nice big squeak in it a few days ago which he thought was just the drive belt being a bit loose. I had a look at it today, being a serpentine belt and still plenty of tension I told him it wasn't the problem. I removed the drive belt to rule...

Check your front Castor rod/radias arm bushes and lower control arm bushes. Also check your Link Stabilizer bar bushes. The factory ones are well known to be worn and perished.

Are there any error codes? You can try giving the TPS a clean, If still no luck with either and no fault codes have been lodged I would say start saving your pennies for a new Transmission.

Burn it! Too many problems, I got a headache just reading all the problems.

Someone who knows what they are talking a bout. I'm guessing you are wanting it for Racing by the sounds of it. As said above 20" is only the wheel size its the size of the frame that changes. If you are sort of on the bigger side of things you may want to look into a cruiser. My brother has a...

Save your Coolant, leave the Radiator in, no need to remove it, Enough room with it in.

Never mind ignore the above post. Try updating the printers firmware and see how that goes Lexmark International, Inc. - Firmware Download

Wouldn't hurt but I don't think it would make much difference. Does it get used often?

Have you tried different paper (New ream), Isopropyl Spray will be fine to use to clean the print head. Make sure there hasn't been any ink spillage on any of the rollers as well.

That's the motto most guys follow these days.

Hall effect sensor for sure, I had the same the issue when I had a Celica, I ended up replacing the whole Dizzy. Fixed the problem.

The VE's have been known for weird battery issues due to being run the ECU apparently. If it does it again perhaps try another battery or Jumper pack on hand. A Jumper pack with enough charge in it will act like a fully charged battery so give that a shot.

Not 100% sure if its even doable, but if it is, You may have to change the bell housing as they maybe different and also extension housing.

Hey Guys, Fairly sure I already know the answer to this but just need someone to confirm it for me. I currently have a 2003 VY acclaim with a v6 in it. I'm currently looking at a L67 on ebay out of a VT. Am I legally able to swap it out without any "Older motor" issues as the VY's came out with...

Intermittent Power no P.O.S.T (No display) is a motherboard issue. Whats happening is the capacitors on the motherboard are meant to discharge whenever the computer gets turned off, in this case they aren't always discharging fully so when you go to turn it back on, there is a power spike and no...

A broken promise is as good as a lie The world doesn't suck anymore today then what it did yesterday

Cheers buddy, I'm from Nords Wharf, work all around the Central Coast and Newcastle, so chances are you will see me sometime lol Power Steering pump decided to crap its self on Thursday at Stockland Glendale in the JBHIFI car park. Ended up getting another pump for $110, replaced it that night...

They are lots of fun to fiddle with. A few people have even done a Fusebox relocation just to help tidy up the engine bay a little bit. Even though I know I should have something more fuel efficient for work, I just can not pass up the power and the feeling of it, its always nice to be able to...

All the rubber Vacuum lines will be getting replaced very soon with some new APE or Sonic Vacuum tubing :) Also looking into getting the manifold completely chromed further on down the track. Have to let the bank account build up first lol :D

English lesson might help you which in return will help us, to help you.... See what I did there?

Well we all know red goes faster, Haven't you seen how quick all those red charades go? lol I'm fairly sure its more due to the fact I've been driving a Turbo Diesel all day, then to jump back into that and spool it up was just the best feeling lol :D

Picked up my new Silicone pipes today from Car Craze down in Sydney, Very easy to fit and car seems to run much nicer with them in :)

Hahaha I've already had to do the Timing belt on it, also the Tensioner for the Air conditioning, there is heaps of room once you have removed the Shroud and Clutch fan which aren't really that hard to remove :) It's been sitting for nearly a week while I got a issue sorted in it, to say I'm...

Yeah it is pretty quick for its age and K's. The turbo's are designed to spool up around the mid to high range areas, when It does hit boost though it is a sweet feeling :D

Hey Guys, Story is I ended up selling my statesman back in march and picked up this beauty the next day for $3300, the paint work is a bit average on it, but I' am in the progress of getting that sorted in the coming months. It's pretty standard 89 Z32 4WS Targa top 5 Speed 3"...

It really amuses me how people like to Jump to conclusions. I was saying it in response to other people saying how crap the iPhone screens were and using it as proof that they really aren't as bad as what some people make them out to be.

I've dropped my iPhone 5 numerous times and still haven't cracked it. Have had it for a bout 7months now and it is a lot better than my S3 which I dropped once, it hit my shoe, then hit the road and completely cracked the screen. Fair to say I would much rather my iPhones over the Galaxy. The...

Sounds like your only way is to perform a Format on the drive. Bitlocker is a program integrated into Windows, You could try turning it off and see what happens? Just hope you haven't corrupted the drive. Should always make a back up of stuff when messages like that happen just incase something...

Changed Coolant and Fuel Filter in the 300zx after doing the Timing belt, idlers and tensioner last weekend - The Calais just sat there.

Things change, doesn't mean they get better.