Search results

i am in need to replace both qtr panels front bar and bonnet. Can get a halfcut for $100 but its a VS. will the panel,s still fit ?? thanks.

ok car kinda has a bit of a flat spot.. seem to chug alittle bit when in that range of throttle. Not allways though... what could be causing this ? fuel pump ? thanks

only started hearing it today, a load knocking noise in the front left wheel area when turning a left corner. seems to mainly do it as im turning into my driveway - its a 1993 VR by the way. is it just some sort of bush kit required? thanks

can anyone help at all ??

ok, my car had a manual conversion, but they stupidly didnt put the manual loom/computer in. ive purchased a loom/computer to suit, im just wondering how much labor is required in having it installed ? does the dash need to be removed ??

hako - so the oil light came on while i was driving because the fuel pump is more then likely buggered ? is the oil light coming on an indicator that the fuel pumps about to go ? and/or the obvious drop in oil pressure. the car is full of oil, just checked. just got car towed to a mechanics...

ok bit strange. about an hour ago, car was low on petrol - just put new seats and carpet into it has been out of action for a week or so. drove to petty station on very low petrol. forgot my wallet. had to drive home, and get wallet. Got fuel, all good. drove about 15km and i noticed my...

where can i buy the underlay that goes underneath the carpet ? i do not want it cut to fit the carpet, im just after a few meters of it.

i had to rip up the sound deadening mat on the chassis of the car because the car flooded. underneath the sound deadening mat was more underlay, that had to be dried. when i ripped up the sound deadening mat, it crumbled to peices. my question is where can i buy more of this sound...

my car flooded the other night, ripped carpet up, all the underlay.. but there was even water under them sound deadening mats. There was more underlay under thoes mats so that had to be dried. when pulling the mats up they crumbled to bits. where can i buy more of this sound deadening...

****.. ive allready been airing it out for last 3 days ive had a little heater in there on the 33 degree day, was like 70 degreess in the car.. poor little heater has been going long and stong for nearly 72hrs straight.. lol well im going to have to tear part of the sound deadning...

mmm part 2 is the one i need. beware of flooded roads maldotcom2!

ok, car flooded up throu the hole where tranny is, the rubber boot wasnt in place when i went thru a flooded road. ive ripped up the carpet, its buggered. all the underlay is soaked. now theres another problem.. on the chassis of the car inside, there are thease white moulded sheets...

ive got a 1993 vr 5spd mauaal, still with the auto ecu in it. is there anyone on here near frankston, in victoria, that can reprogram my ecu to manual ? i also need someone to do that wire bypass to get my speedo working again. if anyone on here can do it please send me a pm.

the other night, i was on my way home. Was quite a nice drive watching all the lighting all over melbourne. i was just near home, i was driving along and didnt realise the whole road ahead was flooded untill i wasd about 5m away from the start of the flooded road. i hit the flood at about...

ive searched and couldnt find on how to remove the centre console. i need to rip the carpet out, and im at the stage of just needing to get the centre console out and then the carpet will be free can someone please point out how to remove the centre console ? thanks

ok, so my car kinda got quite flooded the other night, the whole carpet and underlay is soaked. ive removed the seats and im about to pull the carpet up. i plan on putting new carpet in, except id like to get a darker color then grey ? First off, and 1993 vr carpet the same as any VR OR...

yep my engine light is on while i drive.. i checked the codes and it returned 24 31 35 42 45 49 and a heap of codes for an auto tranny. can i get the ecu tuned to a manual ? is that the memcal chip thing.. ??

hey mate i dont really know me ****... so wheres the bell housing ? further up the gearbox there 2 plugs, 1 is plugged in, the other isnt. doesnt look like theres anywhere for it to plug into .. ?

i picked up a vr 93mdl which had a 5spd conversion, i am wondering does the memcal NEED to be re-programmed for the car to run ? or will the car still run on the auto memcal ?

where are thease plugs exactly ??

how do i tell if i have an auto or manual wireing harness in my car ? i got a 93mdl vr, had 5 spd manual conversion. The speed-o isnt working, so my guess the auto harness is still in the car ?? i checked for error codes and it came up with a heap of codes for an AUTO TRANNY ONLY. so...

i cant find the manual conversion page. been searching for 30 mins now, really shitting mee.. please post it if you know it.

how much work is behind putting in a manual ECU ? to fix the idle probs ??

allrite, i just rechecked and it came out with. Code 24 - Vehicle Speed Sensor (VSS) Code 31 - Theft Deterrent Signal missing Code 35 - Idle Speed error Code 42 - Bypass Circuit fault Code 45 - Oxygen Sensor Rich (O2) Code 49 - Cam / Crank Shaft Signal Intermittent and a heap of...

how do i clear the codes ? someone said remove the 20A fuse near the battery, but there is no 20A fuse, there all 30A. let me know thanks

my vr v6, was auto had manual conversion just shat out all thease codes. 33 35 36 66 44 48 42 45 49 59 66 67 73 82 and then 12... and then it wanted to keep going... ?? lots of them codes are for an AUTO TRANNY only. will they allways apprear there ? i only just read up...

hey dude how do i check what error codes im getting ? im looking all over the forums buit i cant seem to find out how to check the codes ?? thanks

hey i just picked up a 93 mdl vr sedan, $500. had a manual conversion about a year ago. in allrite nic.. the car will not sit at a constant idle. When i start the car it sits around 1500rpm, if i give it a slight rev it may stick at 2000rmp and slowly make its way back to 1500rpm. same...

hey folks. got a 1993 vr 5 spd manual, the speed-o and odometer arent working. do the dash clusters bugger up ? or would it be the mechanics which make the speed-o work could be buggered ? a couple of the green LED lights in the dash cluster have gone to, dont seem to be working. thanks

i plan on spraying my vt tiga mica. i was just wondering if anyone has painted their car before in this color?? what color undercoats do they use for tiga mica ?? the car is currently white and ive rubbed the whole car back. :wax: i was just wondering how many diferent undercoats will...

hey my mechanic i usually go to around the corner quoted me $1400-$1500 for a manual conversion i have a written off vt s-pak 5spd manual.. and i want the manual put into my new vt exec.. so i have all the parts for the conversion. he has to take all the parts off the s-pack and do the...

hey folks im having a bit of trouble connecting the hot/cold switch up. at the back of it its the one with the teeth and small sprocket thing. what position does it have to be in ? a diagram anyone ?? thanks guys

yeh mate your practically spot on, i just had someone explain it all to me via PM.. thanks

ok, i want to get the power options from my vt s-pack swapped to my vt executive. the power mirrors, windows, seat etc.. i was told i might need to get the wireing loom swapped ? im getting a manual conversion done too so i was told that computer thing behind passanger kick panel will...

ok.. im half way through putting the dash back in, and ive just come to another problem of.. will the dash need to be out for the pedal box to be put in ? and for the hole to be cut for the clutch slave ?? im getting a manual conversion done by the way. also, does anyone know if the...

anyone at all ??

will the FE2 shocks and springs out of my 98 s pack fit my 97 exec ? cheers also does anyone know exactly how much lower the FE2 suspention is ?

hey ive just got a few questions about installing the loom. now i dont plan on doing it myself, but i have a 98 vt s pack with electric windows, mirrors, etc.. i want to have the wireing loom from the s pack put into the exec i now currently drive. i was just wondering will the dash...

hey folks im just wondering if anyone would know a rough cost on getting 4 doors, rear bumper and sideskirts painted in tiga mica ? im just after a rough labor cost, as ill buy the paint myself. if anyone has any idea it'd be really appreciated.:thumbsup: cheers