Search results

The seller on ebay you are looking at is the same one as in the Just Commodores Online Shop right here in this forum.

Price is now $11,000 phone 0438 254 764

VN Saloon Car for curcuit Racing. Engine: V6 3.8 series 2 ACL Racing Pistons with standard rods Reground Crankshaft Racing Cam (crow) SCRA 3900 Bosch injectors Extractors into single exhaust (pacemakers) Block has been decked Heads are pretty much standard EMS Computer Approx...

Hey all, I am selling my VN Saloon Car as I no longer have enough time to race it. The car is complete ready to race with nothing to do to it. It has done only 1 race meeting so everything is still fresh. It is a V6 5 speed with a minispool diff. I am in Melbourne's Eastern Suburbs. Priced...

If you send mr-spares a PM he will be able to help you. We sell tail lights in the online shop.

A lonely woman, aged 70, decided that it was time to get married. She put an ad in the local paper that read: HUSBAND WANTED! MUST BE IN MY AGE GROUP (70's), MUST NOT BEAT ME, MUST NOT RUN AROUND ON ME AND MUST STILL BE GOOD IN BED! ALL APPLICANTS PLEASE APPLY IN PERSON. On the...

A man escapes from a prison where he's been locked up for 15 years. He breaks into a house to look for money and guns. Inside, he finds a young couple in bed. He orders the guy out of bed and ties him to a chair. While tying the homeowner's wife to the bed, the convict gets on top of her...

A blind man enters a Ladies Bar by mistake. He finds his way to a barstool and orders a drink. After sitting there for a while, he yells to the bartender, "Hey, you wanna hear a blonde joke?" The bar immediately falls absolutely quiet. In a very deep, husky voice,the woman next to him says...

Ole was working at the fish plant up nort in Dulut when he accidently cut off all ten of his fingers. He went to the emergency room in the clinic and when he got there the Norsky doctor looked at Ole and said. "let's have da fingers and I'll see what i can do." Ole said, "I haven't got...

A teacher gave her class of 11 year olds an assignment: Get their parents to tell them a story with a moral at the end of it. The next day the kids came back and one by one began to tell their stories. Karl said, "My father's a farmer and we have a lot of egg laying chooks. One time we...

No they won't fit. The rear quarters are a completely different shape.

Yeah you can run it for about a minute to see if the noise is there. It would be advisable not to give it a big rev or you will get oil everywhere.

Take the rocker cover off and have a look at the rockers and see if there is a broken one. Once you have the cover off start the car and see if it still makes the noise. Another possibility could be a rocker hitting the rocker cover. If not then I would assume you just have dry lifters. Try an...

It sounds like it could be the lifters are dry. They sometimes make that sort of noise on start up and then it gets quieter. Is the noise actually coming from the top of the motor or can you hear it from the side behind the coil? If it is behind the coil then it is lifters and if it is from the...

They are real easy to replace. Disconnect the battery, then disconnect the wires from the starter motor then get a 9/16 socket on a long extension bar and undo the top and bottom bolts on the starter. Once you have done that it will just come straight out and to fit a new one just reverse...

Try running a direct wire to the battery from the fuel pump and it should pump it. We have found this works in the past.

No chance of any damage.

I find that if you put a screwdriver between one of the dowels on the block and jam it against the flywheel in a cog then use a socket and breaker bar to remove the bolts. It can be easier if there are 2 of you doing this. Hope this helps.

Regardless of where you park your car I would think there is enough oil left in the bottom of the sump where the pick up is to allow enough oil to sit there until the next start up.

We have power steering pumps in the online shop for $129.

Power steering racks are not that hard to fit youself. We have them in the shop for $220 changeover and we can fit it for you for a bit extra. We are in the Croydon area of Melb. :wave:

Welcome to the forum. You will find everyone friendly and very helpful. Cheers.

Yes mate. You can piuchase the springs thru our shop and we can fit them for you. We are in the East Subs. of Melb. send a PM to mr-spares for more details.

You can buy them thru our shop or send Tony a PM. We have them in stock and pick up or fitting is available in Melb.

If you are thinking of buying a Panhard Bar, we have them in our shop. http://shop.justcommodores.com.au/catalog/product_info.php?cPath=6&products_id=106

Try these. http://shop.justcommodores.com.au/catalog/product_info.php?cPath=6&products_id=98

Or you could look in our Online Shop. http://shop.justcommodores.com.au/catalog/product_info.php?cPath=8&products_id=110

A woman awakes during the night to find that her husband was not in their bed. She puts on her robe and goes downstairs to look for him. She finds him sitting at the kitchen table with a hot cup of coffee in front of him. He appears to be in deep thought, just staring at the wall. She watches...

John came back from a safari in Africa. Upon arrival, he went to his friend, Mark, and told him of his adventures. "I was out in the jungle," he said, "when all of a sudden I heard a noise in the bush behind me. Looking back, I saw a huge lion, licking his chops and smiling at me. The lion...

The inventor of the Harley-Davidson motorcycle, Arthur Davidson, died and went to heaven. At the gates, St. Peter told Arthur, "Since you've been such a good man and your motorcycles have changed the world, your reward will be to hang out with anyone you want in Heaven." Arthur thought about...

Yes it is possible to fit an apdated engine into an older model Holden. We are going to be doing a little project and putting a 5ltr EFI into a HQ Ute very shortly.

You shouldn't need to loosen the alternator nut. There is a tensioner pulley next to the alt. This is used to fit the belt. It is not that hard to do. Remember that a groove on a pulley goes with a groove on the belt and a flat surface goes with a flat surface. If you have a autoshop nearby you...

Bullitt :yeah:

The easiest way to remove the drive belt is to get a socket on some sort of breaker bar and pull it towards the drivers side and it will lift up and you can take the belt off and put the new one on. Just take note where the old one runs before you remove it so it is easier to fit the new one...

I would like to raise my hand :wave: for the position.

Yes I know but we can supply for V8 as well.

Have a look in the shop. We have waterpumps for all models http://shop.justcommodores.com.au/catalog/product_info.php?cPath=8&products_id=41 http://shop.justcommodores.com.au/catalog/product_info.php?cPath=8&products_id=42

A guy is browsing in a pet shop and sees a parrot sitting on a perch, it doesn't have any feet or legs. The guy says, "I wonder what happened to this Parrot?". The parrot says, "I was born this way, I'm a defective parrot". The guy replies, "You actually understood and answered me?". "Every...

Your local wrecker might be able to help you or send a pm to "mr-spares" in the shop and you might be able to get a new one thru there.

In the past I have used a 13mm spanner and undid the nut from the arm and then get a flat screwdriver and lever it under the peice of arm that goes on the wiper pivot and it should come up rather easily.