Search results

oil pressure switch??

leaning towards computer hey because the trans and engines are not working right and it's giving errors which have nothing to do with the problem,,,, think somes stuffed thier but then again if it ran fine for the day the computer, might just be getting some random signals making it do wierd...

Hey guys Thank god, all good passed so you don’t need a spare or jack, but as said above if you do have them you need the thread on the tire to be legal.

sweet thanks heaps guys heading off soon so see how we go and let you know

Thanks heaps guys So you reckon i should borrow a similar spare from another car make sure it's legal, or?? Not_An_Abba_Fan, how sure are you? It makes sense that it doesn’t need to be there for the car to function , but they can be very fussy there

Hey guys I’m taken my VY over the pits, and it has no spare wheel or jack will they even check or is it all good? It also has a bit of the VY steering shudder will that be a problem? Any general additional heads up about taking VY's(or any cars) over the pits in WA would be really appreciated...

misfiring or backfiring??? perhaps check your your oxygen sensor, might be playing up or not installed properly, or your spark lug lead/spark plug has been damaged

hey vt through to vz have all got the same windscreen according to my glass wholesaler

sorry? is this for the vy or the vx??

where abouts are you Perth? cos i might be able to recommend some places i was in the windsceen market not long ago, nationally i'd go probably go novus

the differance with a mono block which is single channeled amp is that it will see the total impedance regardless of the number of woofers, if you have a two channel amp and bridge it the amp will see half the total impedance. a two channel is rarely stable at 1ohm so if you get a two channel...

sorry mate would be keen to help out but got heaps of exams and crap for uni due soon, unless it can wait till like july

the TRACTION CONTROL the traction control is so rubbish. i lose heaps of power and the car shudders crazy. so if i have it on i cant launch properly like at 'T' junkions. it's so annouin. had it looked at and it's workin normally apparently

GOLD hahaha

I don't think you'll get the most out of the two woofers with the GM6400f amp, if you run the woofers in series the total impedance will be 8 ohms when you bridge the amp the amp will see 4 ohms. The amp will give 150watts which is 75watts each woofer. And if you run the woofers parallel the...

yer wouldn't go for 3" hey it might start to sound rice burnerish. wounld not go any more then 2.5"

mate i'd probly go super super lows at the front and super lows at the rear , cause they'll go well, hight wise with the 17"s, the s-pacs' have also got the rear camber kit and the rears appears lower then normal, you probly wonna make sure that your shocks have good travel as well, i've seen...

hey if they have to change the ingition barrel, see if u can get a second hand barrel and key and get them to install and recode the key, cos there replacement keys and barrels are pritty expensive. think its like $90 to recode not sure about installation

long day mate didn;t see that it was an xu6. yer if u still need to replace it, you'll have to remove the reservoir, it's held in to the braket with a clip like attatchment, it can be pritty brittal because of the heat so might want to be careful, otherwise you can take the bracket off form...

hey guys i was wondering if anyone in WA (metro) is wrecking a VY sedan or if there's any recommended wreckers. mine was sadly turn into a golf ball after the hail storm and is in need of some tlc, im a uni student so cant afford to much but want to bring the VY back to a commodores good looks...

hey mate think you should be all good to simply replace it, but when u are fill it, hold the reservior as striaght as possible relative to the bottom hose connection and fill it up slowly so the air thats in the new hose excapes. never done it on a vr sc but cant imagine it's too much...

hey guys i was talkin earler with Luke about a bluetooth thud but with enough fiddiling it stop. i've got a ve 2009 ute , this is what i've done: using the factory head unit. from the harness i've cut the front speaker outputs then sent that to the amp high input i tested to make shure...

both thats why it gets frustrating

it's a ve 2009, ute using the factory head unit. from the harness i cut the front speaker outputs then sent that to the amp high input i tested to make shure that the wirers were infact the front left and right speakers, i can't exactly remember the colours now. the outputs from the amp are...

the amp used is the alpine (MRP-F300) 4 ch 50w x 4 and the typr r 6.5" splits (SPR-17S). the four channels are bridged to two and the gain is at normal the alpine amp has the high speaker in puts so i've used that with 12 gauge speaker cabling and 8 guage power and ground cables, the amp is...

hey guys has anyone had any trouble with the bluetooth after installing an amp and speakers, cos when my phone connects with the bluetooth it makes a loud thud noise regardless of the sterios volume, does anyone have any idea why? thanks in advanced

hey luke mate you wouldn't be able to put the link to the harness picture up so its easyer to see? that would be awsume