Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. sed8

    rb25 rego

    seeing as you are in the act you'll may need to get a engineers report for the conversion , but alternativel go and see your local motor registry and they direct you in the right direction, you can always go the rta and say you want to do a engine number swap and see how that goes,, i put an...
  2. sed8

    VL V8 Diff gears

    as long as it is out of either a ed, ef, el diffs, i have never done it personally but have heafd of quite a few who have
  3. sed8

    [LS2] Procharger Supercharger for LS2

    highly doubt a stock stroke 6 litre will max out a blower good for 800-900 hp
  4. sed8

    lowered vk

    buy an adjustable there easier and if you search ebay you'll be able to get one for under the 100 mark
  5. sed8

    Remove rubber mouldings

    heat gun and plastic scraper thats how i got them off if there factory ones it gonna take a while, if the car has had some panel repair or a respray then it should be easier, but if it has been reprayed at some point they have have painted to this mould and removing them may have adverse reactions
  6. sed8

    What paint colour is this?

    get some paint made up at any paint supplies i know some autobarns do it as well , give then the paint code and they will make you the colour in a pressure pack can easy as
  7. sed8

    Changing VR Radiator

    depends on what you got v6 or v8 v6 are a piece of piss, to remove the fan undo 4 bolts and unplug the fan, undo both radiator hoses and and remove the 2 clips that hold in the radiator on the end tanks and lift it out, i think that covers that v8 gets a little bit trickier, as you need to...
  8. sed8

    vs/vl strut

    i spose you could providing if the lower arm is the same bolt up as the vl into the k frame i have both models and have done suspension mods to them never looked that into doing it but visually are totally different setups both at the bottom and where the strut inserts into the tower, would be...
  9. sed8

    Dent in engine bay - what's it for?

    i removed mine just tapped it up and then bogged over it same for the the bump that holds the water bottle
  10. sed8

    diff gearing

    it should but why do you want to go backwards in gearing vs are 3.08 while vl is 3.45
  11. sed8

    battery to boot whats involved

    its pretty easy to do for legality reasons you'll need to put a sealed battery in the boot as well as a battery box because the cops are know going to the extent of saying that the use conventional battery expell gases which requires ventilation, something that the boot doesnt offer, this is the...
  12. sed8

    are vn v6 brake pads the same as vk?

    in my experiences and i been holden man through and through as far as i can recall all brake pads for the front are db 1085 prefix up till vt with have different type of caliper
  13. sed8

    VL seats into VK????

    anything will fit but any seats and rails for that matter coming out of a vehicle fitted with a cat converter will have a different floor profile on the passenger side between an 1 inch 3/4 and 2 inches in fall between left and right seat mount, vk's and earlier dont have this as they were pre...
  14. sed8

    do vl tanks have a internal fuel pump?

    i'm not entirely sure that the internal is low pressure had one out a while ago and tested it and it emptied a 2 lt ice cream container in seconds i **** myself at its pumping spend, couldnt tell ya if it did that under resistence pressure but it moved fuel rather rapidly though
  15. sed8

    manual coversion and shifter location were it comes out?

    well i presume you have a v8 to justify spending the coin on the conversion that you have in mind the t56 will fit throught the hole in the tunnel after you remove the current cover plate, the t56 should have a modified t5 shifter on it as to bring the shifter forward in the car as standard the...
  16. sed8

    [QLD] vr commodore ute aero kit

    still got it
  17. sed8

    [QLD] vr commodore ute aero kit

    offers...................
  18. sed8

    vl wakinshire v8 injection

    i have seen trick performance do a copy of the original holden ttb manifold but they do make one excellent mod to them, the front of the original manifold were a square design and the rear of the manifold was on a slope. trick have changed this by putting the slope to the front allowing the...
  19. sed8

    Lowering & Mags

    legally you can go a 18 cause its 2 inchs bigger than the biggest wheel available on the model at the time, my mate has 19's on his and all is sweet with the use of std suspension components and then lowered, i found that vt onward wheels have a better wheel offset than the vl's and fit under...
  20. sed8

    vl turbo conversion. fuel pump issues

    TRY THE FOLLOWING AND IF THIS CHECKS OUT AND THE CAR ONT TURN ON THE PUMP BY ITSELF FOLLOW THE SECOND SECTION to troubleshoot this get a test light put it to earth and check the following with the ignition on make contact with the green wire this will turn the pump on if it doesnt there is a...
  21. sed8

    Walkishaws on drum brake rear???

    i've heard about this that when the walkies are bolted on somehow they affect the axle/hub making it unable to spin freely, i have put clubbies on a drum rear end and all is sweet, i cant figure out why it would pose a problem with the walkies but all you can do is try, offset are just...
  22. sed8

    Ride Heights

    its only illegal if you cant turn your front wheels lock to lock without hitting guards and the lowest point of the vehicle including exhaust is over 100mm's had a look at your car the front looks to be at the right height i probably wouldn't lower up front but the rear can go much lower...
  23. sed8

    [QLD] vr commodore ute aero kit

    i have for sale a 1994 s pac vr ute with hdt magnum kit 18 mags lowered suspension, travelled 144000 k"s, fresh paint, electric windows, central locking, factory cruise control, tie points in tray as i carry my bike in it, viper alarm, alpine cd player with amp and sub, tinted windows, v6 auto...
  24. sed8

    wheel size

    should i dont know what size mine are but they are 19 with a 245 tread they do scrub but i think thats to do with the offset of the rim, have solved that since by taking to the rear guards with a hammer
  25. sed8

    VL 6 to V8

    as foam said depends if your using the trimatic then you will have to stay with the assie pattern block, if you have a factory v8 vl then this is you block pattern, unless you want to change boxes then your options are endless
  26. sed8

    auto to manual conversion

    harvy1 good pick up forgot bout the mod to those relays love ya work
  27. sed8

    Starter Motor

    always work with the KISS method (keep it simple stupid) as the starter motors are in a less than accesible location, keep with nissan replacement parts (new or second hand)as they a motor specific, auto manual doesnt matter, just need to suit rb motors, i know a vl starter will bolt into rb20...
  28. sed8

    How hard is it to readjust door hinge ?

    depend where the adjustment is needed : if the pins are failing the door will move up and down when you pick it up, also this can be caused by damaged hinges futher investigation would be needed on that though, the door jam may need pumping with a porta power to keep door frame true...
  29. sed8

    auto to manual conversion

    no done this twice and have used auto computers both time all has been good i also pulled out the auto control module which looke like a computer located un der the steering column where that panel is, or unplug it never had any problems with either conversion
  30. sed8

    someone please help me with this.

    early commos have the turn back to get acc feature unless your ignition is loose and then it can be hard to find after owning more than a fair share of vh-vl cars some work some dont, as for the aerial and front end the front if it comes with full wiring harness will plug into factory harness...
  31. sed8

    VK 308 what bolt pattern for the bellhousing

    will depend on what the hz pattern is as early holden's were both patterns, you can only try and find out
  32. sed8

    suspension

    front are heavier duty cause of the extra weight from the bigger motor rear are the same from my experience
  33. sed8

    what is my car worth?

    coindition is the key but i have to agree with the others this current climate were going through has stopped the sale of used cas i have my ute for sale and no one has even emailed me about with offers, things are pretty slow atm
  34. sed8

    Just where does the timing need to sit on the 308?

    6 degrees is about right for a std 308 i had 15 for mine on gas just remember that when it on petrol it may ping cause of the timing, my old vk was also duel fuel and i had it running on 7 as i wanted the best out of fuel as it was making the most power, and it was sweet yet my latest one pinged...
  35. sed8

    [QLD] F.S - VN SS stuff plus other bits.

    i'm interested in the fuel tank but dont require fuel pump pm if you still have one
  36. sed8

    qld: for sale vr s ute 94 hdt magnum bodykit19 inch rims

    open to offers guys all reasonable ones will be considered
  37. sed8

    qld: for sale vr s ute 94 hdt magnum bodykit19 inch rims

    i have for sale a 94 vr s v6 auto, ute red in colour fitted with hdt magnum bodykit, 19 inch roh wheels, cd stereo with sub, viper alarm with central locking, electric windows with factory cruise, lowered suspension, reco injectors, pwr trans cooler, saas steeing wheel, tinted windows selling as...
  38. sed8

    Post Pictures of your VR/VS here.

    my vr ute have posted it before when i just finished lowering it now i have painted it and fitted a magnum kit and know with bigger feet
Top