Search results

Thanks for the replies guys. And the contact. Will let you know results hopefully this week. fingers crossed. x

Hi guys i had my transmission built two years ago. ( everything strengthened bigger stronger new stall convertor stage 2 shift kit the works etc ) Has been serviced 3 times since putting in too. ' There was no signs no noises no problems then out of the blue.. I drove to a mates place...

Ok been a bit slack. Busy building my business rather than my car. I finally got around to driving my car again and finally got it dynoed. Did have some problems with my so called "new" 2 bar map sensor so just done quick tune and wait till new one comes and try again. But did manage...

Well i got pulled over today. I was turning left into a 2 lane road at a set of lights. The copper was coming in the opposite direction from me turning right into the two lane road i was on ,but instead of going into the first lane he came across both lanes . I went at the same time...

new dyno result OK DYNO RESULTS 286 rwhp so whats that 200kw plus a bit of change Not bad i was aiming for 300 +hp but didnt quite make it there I am still waiting on my Haltech to do a bit more fine tuning so WILL definatly crack that 300 soon.

i am very interested. VP black leather , maroon double stitching with holden logo on both front seats and two on rear seats centre console lid and four doors. Please let me know price. Thanks. This is a great idea if you can get it off the ground. Photos of any of your work would probably...

Hi guys i am after an E6GMX Haltech I have cash and am ready to buy. I need asap to get the most out of my new motor and s/c Anyone have one sitting around that they were planning on using but never got around to it. AND NOW YOU WOULD JUST LIKE THE CASH ... email me...

Mate if i can get them off with out damaging you can have them I am still running in the motor but half way there and it only seems to be getting better. I cant wait for the next 500 k's to go and do an oilchange and turn up the boost. Going for bigger brake upgrade next month so still...

no the guards dont have the strips on them. And the doors wont have the strips on soon either I never really noticed too much until you mentioned it in the photo not as noticible in real life Still waiting for the roller rockers. Should be here this week then time for running in the...

Updated Ok i am getting excted iam just about to get my commodore back on the road. In the last 6 months i have spent a bit of time and money on the transmission and new motor Ok the transmission is freshly rebuilt and strengthened 2500 stall stage 3 shift kit and should handle my...

Warning About Ebay S/c Man WARNING I wouldnt buy the ones from WA off ebay. He is a scamer has done many people no feedback , private auction cancel your bid now WARNING See other warnings on here !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:rip::rip:

I am chasing a dickie seat for a friend of my wife who just had a baby and is now overloaded in her wagon. 2 or 3 seater let me know and send me pictures. [email protected] It doesnt have to be genuine or Holden as long as it fits. Thanks

Ok after 12 months of having the sc14 on my 93 VP the engine is on its way out. starting to smoke . I am guessing that i have three months or so left so i figure i had better get started on my rebuild. I am running my SC14 at 10lb 70 mm TB Big Intercooler extractors good exhaust and...

As the title says I am after a CHEAP Series 2 VP 3.8L motor / engine / To suit rebuild I am near Collingwood Park West of Brissie Thanks

hey VK4yk where r u located???? I am about to rebuild my transmission but need it to handle the supercharger any sugestions before i go in to get it done?? What should i ask for?? Thanks any info is a help

OK i got done speeding the other week. The copper was allright and i was standing outside talking to him for about 20 mins. He was like nice car and was having a look around it. I asked him about the clear taillights i had and he said As long as the right coloured light showed when it should...

Yeah did mine christmas day after presents and finished before lunch cost me $90 from repco Remove the belt remove the water pump change the pulley replace the pump 8 bolts and about one hour easy as

Hey would be interested in 2bar map sensor and Delco ECU and tune etc. Let us know anyway. What are you up to now??? What are your new plans??? Thanks

How did you fit your CAI under your bonnett with the front spoiler going upto the bonnett??? Any photos??? Mine has absolutly no space between bar and bonnett but i wanted CAI. The intercooler and water injection setup would probably be enough but colder air is always an advantage...

It is a little lower than yours by the look of it but the pic is also a bit deceiving as i was above the car. Will get another photo on the weekend. I had the idea of the guards litterally a day before i saw the pictures of yours and that just proved it to me. It is the SC 14 Toyota running...

Updated Pictures Ok Exactly 12 months to the day my VN was stolen i have finished my latest upgrades. Supercharger Yella Terra 71mm TB ( in front of TB ) Intercooler Water/Methanol Injection New VZ front guard vents/indicators Here are a few pics. Will get better ones on the...

ok sounds sweet. You pick up from him and i will send you my address and then i will pay you. Let me know. I am in no major rush ( 4 weeks or so ):clapping: :thumbsup: :dance: :w00t:

hi i will take 2 if you seperate them . I just dont need 5 of them. Let me know. Thanks

Hi i am at Collingwood Park. Could you PM me your mobile so i can arrange time to come and look. Probably Monday or Tuesday if possible. Thanks

Hi any more photos of interior seats , door trims? Does the dash all work properly? Any bleeding in the display?? How much for the above?? Where in Brisbane are you?? thanks

try something like this http://cgi.ebay.com.au/Commodore-VN-VG-Lexcen-V6-Car-Manual_W0QQitemZ130019787094QQihZ003QQcategoryZ45575QQrdZ1QQcmdZViewItem should get you going on your little problem.

Problem Solved! MavVP you are almost spot on I had new extractors put on 8 months ago Upon much closer inspection ( first day off and proper look ) The last two bolts were coming loose. A quick tighten and check of the rest and we are away. It seems when they got hot they expanded to...

this is my right arm I think that is all of them for now anyway time to put on my supercharger and a few other mods i have planned in the next 2 months

the start of my back good old Ned again

my left leg Indian with wolf

This is my Mrs Ned Kelly on my right leg ( upclose nice blue eyes like my other half )

it will only let me do one or two at a time so here goes. the previous one was my first tattoo on my left arm tiger and also has my 3 kids names through it this next one my right arm Ned Kelly and his wanted poster

finally here are mine if they will all download

finally here are mine if they will all download

yea i know where the offender is. He is the only noisy bastard there. So hopefully will just be the one loose rocker :bow: will have a look tomorrow . Thanks for all comments and let you know.

no there is the usual tap from the injectors but this is definatley in the engine thanks anyway. anyone had similar prob. with only one rocker being noisy seal? not getting any oil??? i dont know As i said there is no power loss and no smoke whatsoever coming out the back. After 5...

..........

ok only started this morning started the car and i usually let the car sit for a few minutes before driving and i noticed a slight tapping noise ( i dont know anything about engines ) but sounded like the lifter at the rear was tapping and not getting any oil. With a bit of acceleration the...

Very quick one... Will VS Interior swap straight into VP ?? Front?? Rear?? Doors?? Thanks

i have owned a Ford and it was a TD cortina started stock as always and ended up very illegal with the 250 crossflow and five speed homemade crossmembers and couldnt fit a coke can under it. the air filter hanging out the top of the bonnet and NEVER drove sensibly but never picked up in it...