Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. bachig24u

    turboing my 88 vl commodore

    Setups vary depending on goal. You can be as ambitious as you like, the $$$ is the limit. Originally, I went with a RB30NA engine installed Turbo (GT3540), chinese stainless crap exhaust manifold, intercooler, custom made intake manifold, reprogrammed the standard ecu, installed a tailshaft...
  2. bachig24u

    vl wiring

    pm me if you still need this. I've done a few conversions. the OEM VL loom uses 3 wires to get it running in a lawnmower. Pink is main power, black earth and RED for ignition switch. I have the ECU pin outs and body loom diagrams if you need them. If you know someone who is a machinist...
  3. bachig24u

    253 clean up

    as long as you linish/polish any scratches you make to a smooth finish.
  4. bachig24u

    question about vlt tune

    delayed response but here ya go, 1. Most ECU's will require RPM, Coolant temp, TPS, and either MAP/IAT or MAF or both to run an engine. 2. yes, most likely, not really more stable, no way of telling without checking TDC with dial indicator gauge and timing light. 3. 1:1 will not drive the...
  5. bachig24u

    VL runs on 3 cylinders!! unplug 1 injector and runs on 5

    step 1. disconnect MAF/AFM and start engine? any difference? note: it is normal for the engine to only rev to about 2000rpm. step 2. disconnect battery for 10 minutes, unplug the 02 sensor in the exhaust, reconnect battery, start engine? Any difference? Is the car turbo'd? be worth...
  6. bachig24u

    mums air flow sensor keeps blowing

    Have you checked the alternator output voltage is in spec?
  7. bachig24u

    VL wont start, have spark, have fuel, not cas

    See if some one can test your parts on their car for you.
  8. bachig24u

    VL berlina non turbo help

    Sounds like a few wires for the Auto trans computer weren't reconnected properly. All VL stock ECU's have a rev limit, the 3EA/3TA are set at 6400rpm and the 3TA/3TM are 6600rpm if I recall correctly. The Stock ECU also go in to a fail safe rev limit when specific sensors go out of range...
  9. bachig24u

    I need 1227808_5D VN ecu file and Arpb 5D.bin HSV 3800 chip file. . . Can anyone help

    I hope this helps, as this is a batch fire motor from memory, you should be ok to use this one. Just check the file size, it should 32,768.
Top