Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. MEESEN

    MEESEN's VY

    No plans, as its turbo charged and not supercharged there shouldn't be any more stress on the balancer, Unlucky that your LS2 Slipped but i could only get this on by heading it up and winding it on with a threaded rod and washers, Will defiantly keep an eye on it though :) Good pickup i...
  2. MEESEN

    MEESEN's VY

    Hey guys, Slow progress but getting there, As you know its a TT LS1 build but here is moarrr info Model: VY Executive Year: 2003 Odometer: Purchased at 120,xxxkms, LS1 conversion at 110,xxxkms, Complete Top end rebuild at 25/1/2016 Paint: Porche Segel Blue - courtesy of Mirror finish...
  3. MEESEN

    my 66' impala hardtop :)

    Wow well done... alot of hours in that but must be worth it now :spot on:
  4. MEESEN

    Socket/Connector Identification

    Hey guys, Trying too source a connector as pictured, any help would be great It is used in commodores for climate control, but looking too purchase new male connectors. Thanks, MEESEN
  5. MEESEN

    MEESEN's VY

    Kframe powdercoated, new bushes, ball joints, Heavy Duty links and Whiteline Sway bar,
  6. MEESEN

    MEESEN's VY

    Thanks guys, Sandman, no need VY S1 came out with LS1 so just had vicroads change it over, NU13, Haven't had it on the dyno yet, mid Feb is my deadline, just have too finish the dump pipes then i can get it running again.
  7. MEESEN

    2003 Holden Vy

    MEESEN submitted a new Showcase Item: 2003 Holden Vy Read more about this showcase item here...
  8. 2003 Holden Vy

    2003 Holden Vy

    2003 Holden Vy
  9. MEESEN

    MEESEN's VY

    MEESEN's 2003 VY Exec Hey guys, Been awhile so thought id start from scratch..here's my now to be weekender, ETA of Feb 2015, Mind you i do pretty much all the work myself so time is always a killer Hope you enjoy! Before: Colour: Vespers Blue Engine: 3.8L Ecotec (180xxxks) Gearbox: 4 Speed...
  10. MEESEN

    Factory Hollandia H700 HSV/HBD Module wiring

    Hey guys, Got a Hollandia h700 with hsv/hbd module here that i need too fire up, Only problem is the wiring diagram i have is no use, Have 3 Earths, 1 Red and 1 White wire Id assume Red is constant and White is switched but don't want too fry the module, would be great if i had a probe...
  11. MEESEN

    Vy key ring light

    im unsure if they are negatively switched or not but it sounds it, if the roof light is turned off it will not light up
  12. MEESEN

    [VIC] 1998 VT Commodore

    Hey Mate, If you still have it will you take $550?
  13. MEESEN

    VZ LS1 Running rough (Stalling at idle and low RPM) inc. Codes

    Turns out too be a coincidence this has happened finally got some time today too sit doesn't and look over it properly... Turns out it was a wiring issue, where the terminals for a fuse were split open and were not making contact, least it was an easy fix and only took a tiny bit of wire...
  14. MEESEN

    VZ LS1 Running rough (Stalling at idle and low RPM) inc. Codes

    Just started mate, after battery was left off over night and new o2s were installed, will check relays and fuses again just incase
  15. MEESEN

    VZ LS1 Running rough (Stalling at idle and low RPM) inc. Codes

    Chucked a mates maff in it today, still have the same code and 0Hz reading from it, Is there a related fuse maybe or a dodgy pcm possibly
  16. MEESEN

    VZ LS1 Running rough (Stalling at idle and low RPM) inc. Codes

    Hi guys Car has been running terrible lately when in closed loop mode so changed o2s thinking it may be them but not the problem by the looks of it... Was wondering if any of you have had any of the following problems and if so can you shed some more light on the solutions? P0102 -...
  17. MEESEN

    VE post conversion troubles

    Ok guys I went over the car and couldn't find any lose wires or wrong modules (without checking with a scantool) so was abit stumped... But left the battery off over the weekend and presto she runs!
  18. MEESEN

    VE post conversion troubles

    Haven't had access too a tech 2 yet but will have Monday, Could you possibly direct me too how to get to the presence check and vin checks? As in is it under body and then from there or where should i look its been awhile since I've had hands on with a scan tool :(
  19. MEESEN

    VE post conversion troubles

    I'll do a check Tommorrow hopefully and post back results. Thanks mate
  20. MEESEN

    VE post conversion troubles

    I'll have too check Tommorrow if it has been swapped over not sure if there are markings on either too determine but, I have access too a scan tool with the correct card but don't have tis access obviously
  21. MEESEN

    VE post conversion troubles

    If he put the other immobiliser in and got the immobilise error cleared could this be the problem?
  22. MEESEN

    VE post conversion troubles

    Ecu in engine bay changed Bcm under driver side dash, changed Immobiliser changed (he thinks) Key changed (Holden linked a new key as the old key wasn't working) Engine loom, body loom dash loom and boot loom have all been changed over, he is missing side airbag sensors but I wouldn't think...
  23. MEESEN

    VE post conversion troubles

    everything from the wreck has been changes over apparently, where is the immobilizer located (if bot the ign ring) I will check in the morning Holden have sorted the immobilizer out I think as there is no immobilizer warnings coming up anymore
  24. MEESEN

    VE post conversion troubles

    Thanks zero would post on car modder but unfortunately we had a misunderstanding once and am no longer able too post :(
  25. MEESEN

    Hi double I have sent you an email due too your inbox being full hope too hear from you soon

    Hi double I have sent you an email due too your inbox being full hope too hear from you soon
  26. MEESEN

    VE post conversion troubles

    Hi guys, A mate of mine just finished swapping out his alloytec 170 auto too a 190 alloytec 6 speed, His whole looms have been chanced inc Bcm Ecu etc, Set off his immobilizer so had it taken too Holden too get that fixed up, his key was also replaced Only problem is that now the...
  27. MEESEN

    Anyone here done a climate control conversion?

    You do not need to change BCM!!, I can supply looms and instructions on how too do this conversion, all you will need is a CC HVAC box, CC Controls, sensors and of coarse the time and effort to pull your whole dash out
  28. MEESEN

    [VIC] Post Conversion Sale

    $30 and its yours, as for it fitting you should be able too
  29. MEESEN

    [VIC] Post Conversion Sale

    Have stock headers too go with it, never had extractors
  30. MEESEN

    [VIC] Post Conversion Sale

    Bump it too the top! will accept most offers! just want it gone!
  31. MEESEN

    [VIC] Post Conversion Sale

    Bump... Photos added also
  32. MEESEN

    [VIC] Post Conversion Sale

    Standard mate
  33. MEESEN

    [VIC] Post Conversion Sale

    Whole dash has too come out and dash loom modified too suit
  34. MEESEN

    [VIC] Post Conversion Sale

    Bumping too the top need some stuff gone!
  35. MEESEN

    [VIC] Post Conversion Sale

    Hey Guys, Selling all my VY V6 gear after my conversion... LOCATION: All items located in Geelong, VIC - Can post if applicable. CONDITION: All items used in excellent condition PAYMENT OPTIONS: COD, Direct Deposit, Funds Transfer or Paypal CONTACT DETAILS: 0433163376 All...
  36. MEESEN

    nathans VY Calais - 'Calais 2.0'

    Hardly plug a and play hoz, yes it does plug right into the loom, yes a ls k frame fits right in there along with fuel lines, pump, radiators, diff, booster,etc etc... But how is this much different from a Engine conversion when all the work is done for you most of the time with someone else...
  37. MEESEN

    nathans VY Calais - 'Calais 2.0'

    Just some quick photos too prove who did it and that its done... DSC_8312_zps2cdeddf4.jpg Photo by kudos_0743 | Photobucket
  38. MEESEN

    nathans VY Calais - 'Calais 2.0'

    Sounds like an awesome guy maybe he can help me with my conversion XD haha
  39. MEESEN

    Meesen's '03 vy

    Here we go... haven't been on in ages but finally here it is! all updates (That i can think of) Exhaust: Twin Dump Tips Audio: Alpine PXA-H700 MB Quart ONX4.125 HERTZ HSK 165 (Fronts and Rears) JL Audio JX1000/1D 10" Morel 102 Transmission Line Sub box...
  40. MEESEN

    1.9:1 ratio rockers to suit Buick (non ecotec) V6's

    Hey mate are these roller rockers? not non-rollers?
Top