Search results

Got a bit carried away....

Yea sure,

Just sent a reply to your PM, Cheers B-roca

Yea I could really find anything either.. Made this one anyway so it gives you a little bit of an idea. (They are just some random black multispokes with a chrome lip)

Haven't been around here in a while, but i was bored... Those are the KMC's, I have no idea what the other rims are called.

I'm thinking some Simmons Fr20's....

Hi Mate, The rims on that photoshop are made by ADV.1, unfortuently I do not have the model name for those particular rims but i'm sure you shouldn't have too much trouble finding them. Cheers B-roca

I would also say the M100, wire both subs to the M100 @2ohms and then both subs will get a nice healthy 500w RMS each. Having the subs wired on different model amps would probably sound a little strange...

Bloody annoying problem you have there, Only things I can think of are either you have faulty pins somewhere either in the back of the headunit or at one of your connectors.(I.e. Snapped, bent or missing pins) Or You may have a short somewhere in one of the speaker connections, whether it be...

Hey Mate, You might want to check that all your wiring is correct and all your colours are in the correct place, noting that colour codes differentciate between manufacturers. Just check over all your connections and try again you have come this far and it would be a shame to go spend $90 on...

+1 to this statement. Minus the Chev badges it is the first time I have seen a VX with VE kit that looks at least half decent.

Hi mate, Sorry but I cannot do the Photoshop with those images, they are too small and the cut off too much of the front and rear of the car. (it is also very inaccurate to base suspension heights on a photoshop as whoever is photoshopping is guessing aswell) However, I can almost guarantee...

Source image was bad, So I found one on Google Images.

Sorry if this is a bit late Jordzz, my internet had been capped for quite a while.

That's a pretty nice setup. However, there would be 2 things that I would Question. 1) Onboard Graphics From what VE heard the onboard Sandybridge graphics are more of a gimmick, I would recommend at least a cheap D11 card I.e. Ati 5 series. 2) Cooling i7's already run very hot and...

Couldn't find any good pictures with the same angle so I used a different base image. Your car wouldn't be as low as the one in the picture but it should still give you an idea on what it would look like. if it was too much black, you could do a thin whitewall too...

I can do it for you but you will have to supply a source image with the same angle as I had no luck on Google Images. Here you go, The Bonnet photoshop looks a bit mediocre, but i'm liking the black rims.

Didn't really nail the white rim photoshop but I think they look 100x better painted gloss black.

go here ImageShack® - Online Photo and Video Hosting then click browse and choose the picture and then click upload now. Copy the link onto Just commodores

Here you go, Obviously, its not the same ute and the photoshop isn't perfect but it should be sufficient

Ok I will just sum up everything, that everyone has just said... No you don't need a new ECU, just go get it tuned but get it done at a good tuner. Most people do the following mods (no particular order): -Full 2.5" Exhaust -Tune -Diff Gears -Extractors -Cold Air Intake However, if you want...

Well sorry but you obviously haven't been looking enough. All the information that you need can be found on this very forum (in the photoshop section). However, you are going to have trouble acheiving Gloss Orange when photoshopping a white car, it will just make matte. It will be more worth...

Image is kinda small but you get the idea

Yep, its from Extreme Tuners in Athens Dyno Sheet - running 'only' 48psi and hydraulic cams:

2.0Litre, 4 cyclinder Goal= 2000Whp :D

I have no idea what you are talking about tbh... :D I was talking about real life and converting the 4 door trims piece in 2 door...

Here you go mate, I don't how you would go about remoulding those door trims though, sounds like alot of hassle.

Like this?

Your Pictures were **** so I didn't use them.... EDIT: Sorry just read the bit about the wheels needing to be chrome, had a look for some but couldn't find any really so you will have to choose some if you want be to photoshop them on there.

Comment Removed

Here it is in Atlas grey, but I don't know if you want anything else changed... (bodykit ect..)

+1 to Black Breytons or anything by ADV Wheels.

Good work on the new rims mate. I'm still waiting to see a Commodore with some ADV's Though!

It can be done, but not for $200. It is more likely to cost $5000-$8000 (CAPA : Supercharger Kits) Not only will this be expensive But your brothers CV8 will still be faster. If yo are really serious about wanting more power, sell your Omega and buy a V8. IMO Modifications to the alloytec...