Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. enroh

    Enroh's 69 Camaro!

    Picked up a "new" 482ci (.125 over) with arias forged pistons and BME alloy conrods. November 2017 washed up and tucked in bed ready for another formal Two days before said formal busted the m21 so time for a powerglide swap. Few hot spots on the NPC billet flywheel after 1000km driving...
  2. enroh

    Enroh's 69 Camaro!

    This was february 2016 - post summernats Some shiny wheels i found. Back together march 2016 ready for compliance Washed up ready for a formal november 2016 Finally on the way to get it complianced november.....2017
  3. enroh

    Enroh's 69 Camaro!

    So 10 wks till powercruise 72.... time for a turbo LS swap??
  4. enroh

    LsX vs 632 dart big M

    cant say i agree with either of those comments. its not hard to get a big block engineered in an old holden, or even in a late model commodore if you know what you are doing, and they dont run any hotter than a cammed and stalled LS motor if they are tuned correctly and they dont need spastic...
  5. enroh

    Corey's Edge Barracuda Buggy

    lol rookie... haha
  6. enroh

    EYY's HJ Ute

    Leave it on gas and turbro it......
  7. enroh

    my 66' impala hardtop :)

    please tell me that H motor is turboed....
  8. enroh

    Corey's Edge Barracuda Buggy

    Purely because 1st Gen are cheaper lol, and power wise there isn't much in it.
  9. enroh

    Corey's Edge Barracuda Buggy

    Yeah the 225s. seeing as they're free i'd definitely go with them. plus if your looking for actual light output the bigger the reflector(housing size basically) the more actual light they put out. Your not slow mate your cracking along nicely. I've been "building" mine since 2010 and so far all...
  10. enroh

    Corey's Edge Barracuda Buggy

    Id definetly go the bigger spotties mate, i reckon the look will be much better. Im ashamed to say that your cuda build is progressing a hell of a lot quicker than mine! Haha, your doing a very good job mate, I think I first spotted the build on edgeforums but its a bit dead over there so i...
  11. enroh

    Enroh's 69 Camaro!

    Not bad for a days work. Dirty bloody apprentices! Nearly done.
  12. enroh

    Enroh's 69 Camaro!

    Merry xmas and a happy new year to all. Here's some ear porn to bring in the new year... https://youtu.be/KqAvH_ce8ck Now this is where the ol girl is at the moment... The block is cleaning up just nicely. Throw some new gaskets at it and some new paint and enrohs your uncle, just like a...
  13. enroh

    Is it time for an "LS guide to forced induction"??

    Well, Is it? Ive been thinking about doing a thread on forced induction how to for a while on this forum? Is it worth it or are there enough forums out there with the same info for LS's?
  14. enroh

    [LS1] Monaro LS1 to LS7

    Good luck with making it the fastest in Australia. .... But anyway putting in any ls based engine will not require hacking anything at all if you are smart about it. I've always wanted to put a twin turbo ls7 in a monaro coupe, and putting on a vy SS front end.
  15. enroh

    Vx ss 6.2 ls3 conversion

    Yeah it's a relatively simple swap these days. Plenty of ls1 have been swapped for LS3 l98 ls7 etc
  16. enroh

    my 66' impala hardtop :)

    Where hast you been ARI? ????
  17. enroh

    Enroh's 69 Camaro!

    haha yeah, luckily we have an empty house on side and I made sure the elderly neighbours on the otherside were out..... We may be bogans but were upper middle class bogans so we show the neighbours at least a semblance of respect.... hahaha
  18. enroh

    Enroh's 69 Camaro!

    First little thing to do is to modify the back of the headlight buckets to suit new ADR compliant lights that have replaceable bulbs. Unfortunatrly though to remove the buckets the bumper and grille must be removed :(
  19. enroh

    Enroh's 69 Camaro!

    SOOOOOOOOOOOOOOO PURTY!
  20. enroh

    Enroh's 69 Camaro!

    Well this was what happened about 6 mnths ago The dirty little rat motor out and shiny new NPC billet flywheel and coppermix clutch
  21. enroh

    My 6L, cammed, manual WH2

    Holy **** an update!! lol
  22. enroh

    AFTERMARKET turbo install & INSURANCE options

    Everything was ticked. Wasn't drunk. Not going into further details about it sorry. I'm Just saying that just because they may accept an engineered modification, read the PDS and associated fine print, because they CAN and WILL wiggle their way out of anything, and even go to the extent of...
  23. enroh

    Rory's 2006 Patrol

    Yeah i still have the mighty TD GU. It got reinstated as work ute/daily driver for the last 18mnths so not a huge amount has happened with it. Ive put a H260 diff in the rear and went 4.375:1 diff ratios in both and put it back on stock supension for now. Will be a bit more happening to it soon...
  24. enroh

    AFTERMARKET turbo install & INSURANCE options

    All my vehicles are insured through shannons. Id be careful with NRMA and Justcar as they will gladly take your money but i know firsthand that they will then not pay out if you car is written off and then they're like "nah mate we dont insure no turbro commodores"....
  25. enroh

    Rory's 2006 Patrol

    dont worry about upgrading the intercooler on the zd. It needs a TD42t or it aint a "real" patrol....
  26. enroh

    When is an engine too old to modify and need replacing?

    In my personal opinion I would spend the money and rebuild the original engine for the vehicle. For the price of a rebuild go the extrs bit of coin and stroke it. You can have a good head cam and stoner package for $10k
  27. enroh

    [LS3] Turbocharging VF Clubsport

    Yeah this thread went to ****. Forced induction is forced induction as per the LA1. Truth be told even if your car is "fully engineered" if something happens insurance companies will find a way out of paying. Just turbo it like everyone else. And stop listening to that idiot pirate.
  28. enroh

    Fitting a T56 g/b from VZ to a VE L98...?

    As far as im aware the ve t56 is the same length as the vt-vz t56... Only the t6060 is different.
  29. enroh

    [LS3] Turbocharging VF Clubsport

    LOL, this Pirate fella cracks me up.
  30. enroh

    any gains

    Yes removing the air filter will give marginal gains. As said above it is a fair restriction on the intake(if it wasnt it wouldnt be an effective filter). You are very unlikely to suck in anything that will harm your engine, its not as if your driving around Clermont in the bulldust, your at a...
  31. enroh

    VZ SSZ feels slow, thinking of camming (LS1 Auto)

    id definetly be putting in a 3grand or 3 and a half grand stally with that cam and those diff gears. And if it doesn't feel like its shifting properly, id say there is something wrong with your box.
  32. enroh

    Help diagnosing L76 miss

    Injector possibly. How do you know it isnt the coil, lead, plug?
  33. enroh

    LS1 383ci turbo overboosting

    then just boost the b#tch to 20pound!
  34. enroh

    LS1 383ci turbo overboosting

    Whats ya compression Ratio?
  35. enroh

    Enroh's 69 Camaro!

    Border collies. I hate the bogan spec backyard but not as much as wifey does! Thanks mate! Will be more to come on it soon.
  36. enroh

    Enroh's 69 Camaro!

    LOL thats for my dogs hahaha. Oh and excuse the bogan spec backyard, just bought the place...
  37. enroh

    Enroh's 69 Camaro!

    some shenanigans when i was meant to be cleaning out the shed.... https://www.youtube.com/watch?v=-C5_Z3jVRQQ Not much to update on the Camaro, just building up some cash so i can spend money on some larger ticket items. Will get some pics up when i get a chance.
  38. enroh

    LS1 383ci turbo overboosting

    50 mm gate is more than sufficient on a stock capacity ls1 on e85 with gt42 sized turbo an a rear housing that big. And even with the extra 37cubes you have the gate should be more than big enough. I would say either the actual valve in the gate is jammed/siezed, or the tuner has put in wayyyyyy...
  39. enroh

    my 66' impala hardtop :)

    oi, ease up on the anit-white lettering rants, i'm feeling segregated.
  40. enroh

    Enroh's 69 Camaro!

    http://youtu.be/imKB1aPPgOk as promised an idle vid, put on some beats headphones or turn it up!!
Top