Search results

* White s1 VT S (All parts wrecking) Ask for part/price. LOCATION: * Moe, Vic 3825. CONDITION: * New and used in my ride. can be seen in my l67#L67 TORQUE • Login #or check out my photo album on my profile to see pics, can link youtube for exhaust sound ect. PRICE: *As above or...

Hey mate, have you still got the alternator off it? PM me if so with price and location..

You forgot power ;)

Go onto L67torque.com someone will know there. where on the motor is the noise coming from? Blower could be torqued wrong and rotors are clipping.

My vt family beast ;)

Nothing yet on the exterior, just been concentrating on the engine and tuning, once it's running right and LSD is in I will definitely go the monaro bonnet and head lights as the coolers make the blower sit really high and the pulley was touching the bonnet lol used a hammer to make clearance...

Havnt been on in ages, thought I'd have a look around and an update, couple of upgrades since last post running 2x mace mini blizzards @ 16psi, LIM and Blower ported to suit the coolers. 2x 100cpi cats, custom fuel rails, in the process of some fine tuning and tweaks. LSD soon so should be...

Can you close this thread and shut down my account please mods. This site is a joke. You all can #### your shitty input up your arses!

Back up keyboard hero. Simple if you don't know what you are on about and that bored you have to jump on every v6 thread out there and fill the thread with non constructive crap. why bother. Facebook is just a few presses away. Now #### up and #### off.

Have or do you own a modified l67? if not I would prefer some constructive input from somebody who has.

Hi there, tomorrow I'm putting in an order for a pair of 4" 100cpi cats for my l67. at the moment, doing to mod process I have 1.9 rockers, cai, 10psi pulley 4" intake and a twin 2.25" pacemaker exhaust from the cats back. I'm going to be intercooling soon enough so need it to go with my setup...

I'm on my p's in Vic my car is a vt s1 l67 you will get exempted for vs-VT s1 and wh that is all. If you want an l67 on your p plates you are looking at these models. All other are banned. and it's like this. You drive it like a hoon you will not only lose your licence but your exemption and...

Hmmm so just go the LSD and the decent tyres + camber kit. I was looking at getting the adrenalines. see how I go for now.

Problem is you can only pussy it so much before your causing to much problems for other road users. she's getting an sv6 at the end of year for Xmas and I'm going a2a so need the LSD. So it can be done, what's involved installing traction control. Not really caring how hard it is to do. If it...

Usually it has 17" VX SS rims at the moment using 2 of my old Walkinshaw rims on the front as they don't fit the rear. Going to get the best bridgstones I can buy to fit. As I know well you get what you pay for and no point skimping.

Had the car 6 months now and had a new set of maxxis tyres on when I bought it, due to camber on the fe2 rears chewed through inner edge about 50mm in and tyres are shagged. ATM got my front tyres on the rear and smaller set on the front that have brand new tyres on them. got cat problems to fix...

Wanting to fit an LSD to my VT s1 l67 as I'm at the point in mods where my car is almost undrivable in the wet. Can't speed up quick in traffic and have to baby it around town. Just spins. For a hoon would be great but I have 3 children and don't feel like replacing tyres every 6 months. Can I...

Just take the charger belt off. Will be fine. I wouldn't bother but. Why don't you buy a s1 VT l67 that way you can drive it legally. or go a sv6

VT heron white is JO73

Mace or ttt. 10 min job if you havnt done it before 5 mins if that if you have.

Sweet, cheers for that.

hi all, will make the long story short.. owned my vt s series1 for about 6 months now and went to go down the shops today and my rear tyre was flat, checked the other and thats about to die aswell. about 50mm from inner edge out is on a sharp angle and down to the wire. knew they had...

And the maf, while the intakes off with crc maf cleaner

Change coil packs, plugs and leads. See how you go. Does it stumble or just cut out?

it's cool mate, what do you think of this in the magnaflow range? or is there better brands to be looking for?

Was looking at the magnaflow cats, but wasn't to sure if they were any good as they are on eBay. www.jegs.com does them between $80/$100 a piece plus postage imported from America. When the Aussie dollar is up would be cheaper again. what is the best brand performance and reliability wise I can...

Cut and polish is what it's name is. Cuts back dirt, grime, metallic scratches, blemishes And dullness. and polishes to a shine. I would go a full cut and polish and a good buff, and see how you can bring it up by hand. Wipe off then a wax. you can get clay bar to clean up the paint too. I have...

I wash, dry, cut and polish blemishes and road grime then wipe over, touch up chips with paint pen then go a wax and a buff. Comes up like glass. If I was you get a cheap buffer from supercheap think they like $25 at the moment or if you have the cash the angle grinder style one works a treat...

I did my bushes a couple months ago, nolathane were $35 for bushes by them selves and with the pins were $60 better to do the lot I say. Better safe than sorry when it comes to suspension.

My stock cats are the same as the ls1 cat, going to cam first then cool. Should be fun by this time next year :) will have to open the exhaust up sooner or later so while I have a problem, may as well throw something better in.

Seen some people use that spray foam from bunnings, you can get the fire resistant stuff for around $35 a can. You can also get header wrap that will stop heat from your exhaust manifold or even heat shields to stop the heat rising directly to your intake pipe, I have a bunnings cai, and 4"...

Sorry my bad, missed that part.

Have you checked the registered code? if the engine light comes on it is registering fault codes. Do you know how to check them?

Iv read around 200, was looking for one before I bought the s pack found 2. One had a rooted motor and a spare that was rooted too so I didn't go there and the other was sitting in a paddock and was not worth looking at. :( would have been nice to find one. crap all over the 5.0l SS too.

Hey guys, my vt l67 has a shagged cat converter on the drivers side, had the car for around 6 months and it has been annoying the eff out of me since I bought it. Upgraded to a pacemaker duel 2.25" cat back in hope it was the standard exhaust but found it is a cat. Exhaust would sound great if...

Just put a poker card on a spoke if your mag, will sound like a motorbike and gain you serious rwkw. lol speak to mace they should be able to help. I'm going cam soon your looking at a couple grand for parts and install. But you only want it for sound my advice is buy a v8.

I had the same prob when I did mine, battery had dropped a cell, new battery will fix it.

Need NOS Harry! 2 of the big ones! Do a bit of googling when it comes to fuel filter. I read alot that people have trouble with the clips and break them! Think by memory it was push towards filter, press clips in and pull. Oh don't forget to pull fuel pump fuse and start her till she stalls.

How are your bushes looking? Drive around with your aircon off for a couple of days and see if you can pinpoint the noise.weather it's to do with your aircon, suspension, engine or something else could try getting someone to turn your wheel back and forth while you closely listen around your...

Full service, new plugs, new leads, clean throttle body, clean maf,clean intake manifold,clean iac. New Fuel filter, new air filter and injector cleaner use good fuel and keep that foot un stretched and allow the computer to get out of it's loop of being driven hard. check all vac hoses. And...