Search results

dont wory, just answered my own question, the circuit is always open, reversing the battery terminal polarity would cause the relay switch to throw from 37a (injector curcuit) to 37 (empty pin), applying no voltage to the injector circuit. what I actully need to do is learn to read, as I am...

So what you are saying is, because I dont have continuity between between the black/white wire and the negative battery terminal, my diode is working? why am I not getting continuity between pins 101 102 103 104 105 106 114 to earth?

I am having problems with my Calais, it won't start. I have traced the problem back to the reverse polarity relay, but can't quite get my head around the cause of it. Last week I had an issue with it having trouble starting, after replacing the plugs, leads, dizzy cap, rotor button, CAS, AFM...

I cant beleive no one picked up on this... look at the picture of the struts i posted ^ I paid some one to built these srtuts, and didnt realise what they did wrong untill I fitted the whole front end. Can you see it yet? This will teach me to be lazy. If you want something done right, you...

I am in the proccess of doing a VS Ecotec conversion to a VK. It's a pitty this thread didnt take off because there is a lot of "half arsed" info out there, many of the people who have done these write-ups on different forums havent completed the job properley, Many of the conversion kits out...

Yup, the pins can be a pain, I used a hole punch type tool, some took longer than others, and others got hit by the angle grinder. But I think he's having trouble with the VH style check starp. VK and on just have a pin sitting in the hole, VH and earlier have a pop rivet style pin. Just chop...

I'm also trying to take my doors off my vh. It's not easy to get the pins to budge, are the pins suposed to be hit up or down? I have been bashing for hours and now made a mess of my hole punch, im now tempted to get the angle grinder out and take the hinged right off the doors. there must be an...

Try changing a Dizzy cap on a 5L injected, its half under the bunch of bannanas.

Thanks, VKBerlina. I got a VH SL/X V8 wagon project, Im thinknig about puting VK bars and side mouldings on, seems to make sense to just find some doors str8 from a vk / vl with moulds.

dont you hat it when some one replys without reading the question

so VK / VL wagon rear doors will fit VH wagon?

Does any 1 know if VK or VL sedan doors will fit on a VH wagon. The shape of the quater window seem to look similar, has any one tryed it?

If your pads are worn there will usually be exessive heat, therefore the brake fluid boils and u end up with more condensation in your lines than brake flid. u should allways bleed your entire system every pad change.

thanks heaps.

hi, does any one know if bleeding ABS brakes is any different to standard? i have a vs and im just about to change my front pads for the first time. can any one help me?

thats exactly what happend to my vs berlina. it was the crank angle sensor. cost $50.00.