Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. kronich3244

    VZ Sv6 diff changing help???

    hi, i have been givin a vs v8 diff centre with 3.08 gears and it has been welded up nice n strong!!! was wondering if this will bolt into the vz.. or if anything has to be changed to make it fit.. some people say it will fit other say it wont... so if anyone can tell me a straight up answer that...
  2. kronich3244

    Front shocks ####ed- only 85k

    So guys I'm getting the front springs done in my vz sv6 and my mechanic says I need new shocks cause when he pulled the out they stayed down?? Can anyone shed some light on this for me??? Is my mechanic trying to rip me off??
  3. kronich3244

    Consumption economy Fuel average liters Km

    05 vz sv6 6 speed manual... mine sits on 19-20l/100km and avg speed is about 47 kms... i drive it hard but... not that hard.... ive just changed both front o2 sensors aswell.. as scan tool showed a faulty one... the code for the o2 is gorn now but my fuel consumption is still heaps bad... should...
  4. kronich3244

    IAC or AAC Valve.. Does the Alloytec have one??

    IAC or AAC Valve.. Does the Alloytec have one?? if so does anyone know where it is... if not how is the idle controlled on the Alloytec??
  5. kronich3244

    P0152 - o2 Signal High Bank 2, Sensor 1

    it is a 2005 model... pretty sure its march 05...
  6. kronich3244

    P0152 - o2 Signal High Bank 2, Sensor 1

    also read this on a different site - P0152 O2 sensor circuit high voltage (Bank 2 sensor 1)... anyone shed any light on this lol
  7. kronich3244

    VZ lowering springs.

    i just put ultra lows in my car and am about to put ultra lows in the front.. im just running standard 17's 235/45/17.. and my guards arnt rolled... the back is fine... ONLY JUST... but does anyone know if the fronts will clear??
  8. kronich3244

    P0152 - o2 Signal High Bank 2, Sensor 1

    yer for some reason he didnt know lol... just said probably the 02 sensor... he didnt even know what sensor was High Bank 2, Sensor 1 lol
  9. kronich3244

    P0152 - o2 Signal High Bank 2, Sensor 1

    hey guys i have a vz sv6 and it started to idle a little rough and become a bit slugish.. i took it to a friends work shop and used the scan tool and come up with this code - P0152 - o2 Signal High Bank 2, Sensor 1.. i cleared the code and the car idle'd even rougher but had alot more power /...
  10. kronich3244

    Rough idle Alloytec

    that same thing ticks in my car... but its not constant like that... say if i give it a little rev once my foot leaves the pedal and the revs start to drop it will click once... happens everytime i give it a little rev!
  11. kronich3244

    20" Rims on SV6

    hey guys.. im looking for some 20" rims for my sv6 and was wondering what my options are... can i go 8.5" wide or am i restricted to 8"... also what is the correct offset that i will need... and finally the car is on fe2 suspension but will be going lower as soon as i get the cash... anyone who...
  12. kronich3244

    Redlining: How bad is it really?

    what if its a manual
  13. kronich3244

    What induction system for the SV6

    been looking at a few induction systems to go for... alot of people recommend the ss growler kit cause it has a nice sound a gives good throttle responce, i dont really want to go with the mace engineering one cause their power gains dont seem to be as good as the growler... but i seen on here...
  14. kronich3244

    Powerbond harmonic Balancer Help!!

    all good mate did some research and found out the powerbond balancer is not only for the alloytec but for the LS1, LS2 and a few other motors aswell... got it on their with my shortened belt and new idler pullys and can confirm yes it does make a nice difference in the power!!
  15. kronich3244

    harmonic balancer removal what puller????? HELP!!

    got it off got the new powerbond one on!!! i used the smallest puller you could buy from repco and got it off in a couple of seconds!!
  16. kronich3244

    Powerbond harmonic Balancer Help!!

    sorry may have made a mistake thinks its the LS1 motors + alloytec that it fits
  17. kronich3244

    Powerbond harmonic Balancer Help!!

    just got a powerbond harmonic balancer with belt to suit... ive pulled the old one of and it doesent have a key way were as the powerbond one does... is this because it also suits the LS2 motors... part number - PBU1177-SS20 any help would be greatly apprecieated thanks!!!
  18. kronich3244

    harmonic balancer removal what puller????? HELP!!

    wholey f**k thats expensive for a puller... my mate who is a fully qualifyed diesel mechanic is gunna come around tomoz after work and have a go.. he has a few different pullers he is going to bring with him, so i think ill give that a try first lol
  19. kronich3244

    harmonic balancer removal what puller????? HELP!!

    hey guys im doing a underdrive balancer and belt kit on my sv6 ive got everything off cracked the balancer bolt but i cant seem to get the balancer off... i have tryed using 2 different types of pullers but as i get tension the arms just slip out... ive tryed grabbing it from the outside and...
  20. kronich3244

    Gearbox / Clutch Noise - SV6

    so i know the clutch is on its way out... but can anyone confirm that the Thrust / Release beareing is the noise im hereing??
  21. kronich3244

    VZ Alloytec manufacturer faults handy hints

    yes mine sits at 1100 for about 10 seconds then drops to 900 then goes down to about 600-700
  22. kronich3244

    VZ SV6 2004 - Questions on 2 'issues'

    why would their be a loud scraping coming from the engine???
  23. kronich3244

    Questions about vz sv6 ute

    i heard that pedders grays / super lows were the same heigh as the factory sv6 suspension ( FE2 ) anyone able to clear this up... also resetting the ecu - disconnect the battery for 3 or so minutes or you can pull the ecu fuse out from under the bonnet in your fuse box!!
  24. kronich3244

    Rattle Noise on Cold / First Start of the Day - SV6

    thanks for your help guys... im not to worried about it now but if it gets any worse ill definitly be taking it to my mechanic!!!
  25. kronich3244

    VZ V6 misfire under load...

    no worries mate, glad i could help!!!
  26. kronich3244

    Rattle Noise on Cold / First Start of the Day - SV6

    this is also what a few people have told me!!! stretched chain / tensioner gornskies.... but if it was the tensioner wouldn't it be a constant rattle.... not just 2-4 seconds on a morning start... also ive heard of a few people saying that it gets to a point were it will throw a fault code...
  27. kronich3244

    VZ V6 misfire under load...

    On the vz their is 6 individual coils, it is very common for them to give out, if you buy the genuine ones (BOSCH) it wil most probably happen again its only a matter of time.. recently DENSO has made aftermarket coils to suit.. for BOSCH it is about $350 for all six and for the DENSO ones...
  28. kronich3244

    SV6 Front End Vibration

    As a tyre technician for almost 4 years now and working with some of the most up to date equipment i would be saying that one of your wheels has thrown a weight off or you have purchased cheap tyres and they have runout in them (out of round)... as for 19" and 20" wheels anything around 8" to...
  29. kronich3244

    Rattle Noise on Cold / First Start of the Day - SV6

    Hey all, i have a VZ SV6 on 85,000k's... I have only owned this car for 3 weeks now and have noticed a weird noise when i start the car for the first time of the day, it last about 2 - 4 seconds and then stops, if i turn the car of straight away and start it again it doesn't make it, its only on...
  30. kronich3244

    Gearbox / Clutch Noise - SV6

    Hey all, im new on here and have just brought a vz sv6 on 84,000k's as per usual when i looked / test drove the car their were no noises or anything out of the ordinary.. 1000k's later i have a noise coming from the Gearbox / Clutch... When im sitting in neutral with the clutch out you can here...
  31. kronich3244

    VZ Alloytec manufacturer faults handy hints

    some of you guys are saying the timing chain makes a rattle on cold start... could some of you please describe what it sounds like... i have a vz sv6 on 85,000 k's and first start of the day it makes a rattle / metal tingy sound for about 2 - 4 seconds and then goes away... if you turn the car...
Top