Search results

Don't go on here very often anymore, still have the ute. Don't think I could ever get rid of it. Have a VF as well, both get used for testing new potential products :)

I'd be getting the Series 2 IQ system from us at Automotive Lighting Customs, you just can't beat the factory look and feel. It was designed for these cars, so everything just works as it should.

If You swap all the insides to the new facia then it will work no worries. Assuming you don't stuff anything up. No programming required.

I program these units and install/ supply reverse camera kits for all VE's. Your unit has been programmed as a wagon. The guidelines on the wagons are angled because the camera is mounted on the passenger side of the vehicle rather than the middle. Sedan - guidelines in middle Wagon -...

All the black plastic you see there is one piece. Just the parts you can see once installed are gloss black.

You most likely have the genuine dealer fitted kit and not the factory fitted rear sensor kit. You can tell simply by looking at the sensors, if they sit flush with the bumper (almost as though they're inside the bumper) they're factory fitted. If they stick out a little (maybe 2-3 mm they're...

What year and month is your vehicle? What does you build plate say the engine is? What intake manifold does your engine have?

Extracted Performance makes great high quality exhausts. Have seen Andy make these first hand, can also make changes to suit your liking.

Most likely the navigation board has failed unfortunately. Usually the case when it just stays on the load screen.

No one makes any that fit the Series 2, only way is to swap to Series 1 interior panels.

Check the fuse box at the battery.

The extra wire will be for the reverse camera that's attached to the boot lid on the E3's. Could get the unit programmed and wire the camera to work on your factory screen.

Just be aware that the Walkinshaw OTR is just a rebranded version of VCM's OTR. Walkinshaw just buy from VCM and stamp their logo on.

Don't supply anymore unfortunately. Only fitting.

We can fit and wire it up for you in Melbourne if you don't want to attempt it yourself. www.facebook.com/automotivelightingcustoms

Ordered mine for $62,400 with mats, 20" wheels and black and white plates. Bought From Barloworld Holden, speak to Margaret. All other dealers, as well as Ferntree Gully where more expensive.

There is a bluetooth harness kit I've seen attached to vehicles such as yours, without the direct bluetooth plug. In short there's a patch harness that connects to the connector in the first 2 photo's. It's got both female and male ends of the connector and links to the bluetooth module. Try...

Is that including on road costs?

I was quoted $60150 for an MY17 SSV Redline delivered second half of the year. +$500 prestige paint +$1600 20" Wheels inc spare What have other's been quoted?

All VE's have a fuse box at the battery, just so people don't get confused.

Depending on where you are located I believe Envyous Customs does them https://www.facebook.com/envyouscustoms/?fref=ts I may also have some www.facebook.com/automotivelightingcustoms

Good to see you got it all working mate, I like what you've done with it. Very clean install. Didn't know you were on JC!

The factory sic gauges get their data from gmlan, so unfortunately you can't wire these gauges to the same connection. You could but only for + and - power. Also if you're wanting to get rid of the sic gauges completely you've really only got 2 options with keeping the SS Inductions gauge pod...

Disconnect the video connector on the side of the head unit. Smaller on just below the large quad connector (drivers side of the head unit) This will tell you if it's your wiring or the head unit itself. Sounds to me like the video signal stuffed and is just sending a blank screen to the unit.

No worries mate, if you get stuck on anything let me know, always happy to help.

It's a known issue with the VE's dash, never seen one with that many marks though. Panel has to be replaced, pretty much whole dash needs to be removed to get to that trim.

Hi Husky, I'm just in Rowville and can remove all these pieces for you. Pull apart VE interiors at least twice a week. Send me a private message or you can contact my business page via the Automotive Lighting Customs link below if you're interested.

Can be done a 2 different ways. Go to a local Holden dealer to do it ($120 or so) some dealers can and others have no idea what you're asking for. Have someone reprogram you unit and flashed to blue $100 or so. Or Can fit a blue screen unit from another car, still has to be programmed to...

Thanks Richokidd, glad to hear you've enjoyed the thread. Need to update it a bit more I think! Envyous Customs can do the IQ touchscreen and gauge upgrades over in Perth: https://www.facebook.com/envyouscustoms/?fref=ts or his on here as well...

Hi Rob, I see you're from Wodonga, I'll be up in Bright over easter and can scan the hvac for any codes. Got both a hvac and Tech 2 scan tools. Can also provide a replacement tri zone or duel zone hvac which may solve the issue. Send me a message if you'd like to organise a time etc.

Easier to Plastidip it black, saves removal of the badge.

Yep, speak to Lsxtreme Electronics. https://www.facebook.com/lsxtreme/?fref=ts

Hi there, We can easily upgrade your current IQ with navigation and reverse camera for you. Just needs to be programmed and fitted. Send us a message www.facebook.com/automotivelightingcustoms or [email protected]

Hi there, We can activate it for you in Melbourne along with reverse camera, VIM etc. We activate through the OBD port but not using our Tech 2. Let us know if you have any questions, hopefully you've sorted it out by now though. www.facebook.com/automotivelightingcustoms or...

Better off upgrading to a Series 2 IQ unit and keep the factory look. We can help you out with one plug and play, can post Australia wide or fit in Melbourne. Can do them $1200 fitted or posted. Programmed Holden VE HSV IQ Series 2 Headunit Omega SV6 SS SSV Maloo Clubsport | eBay

The navigation has a seperate antenna, so that's won't be the issue. Can happen if the board is loose, or if the navigation card was somehow slipped out. It's located on the side of the unit, on the drivers side.

Hi there, Where are you located? Are you doing an IQ conversion to a Series 1?

Were you after the HSV gauges, or the dash cluster?

Personally wouldn't bother trying it. Plastidip has a pretty strong smell. Taking every part out of the car isn't too difficult, but run the risk of breaking trims while attempting it. I see you're from Melbourne, If you want I can take any trim out that you want to paint. Send us an email...

Thanks James haha