Search results

Okay so first things first ... I know skids are wrong.. blah blah.. my mates got a 6 speed man svz and can't get on the brakes.. just dies out.. why ? My ba xr6 loves a skid!

Hey guys, I just had a mate swap an ecotec from a vt that went into my vt v6, what do I need to provide to vicroads to legalize it?

Well I noticed my reverse lights aren't working.. So I looked at my reverse light switch and there's no plug in it?? And I can't see It dangling down?? What color are the wires and what does it look like ?

i did thank you :)

Hey mate, check the vac hoses behind the plenum, check if they came off or have split, same with the hose that goes from your intake manifold and throttle body

Hey guys! Im about 3 weeks away from my turbo setup being done and its down to a tune!! Where is the best place to take a vt v6 turbo??? Anyone been to Melbourne performance warehouse? ( MPW)??

Hey guys! Some of you may know that a while ago i wanted rear mount turbo my vt 5 speed! well slowly it has all been coming together! i will upload some pics! l67 de comp block, decked, honed and bored out for new over sized pistons. New Mace l67 crank shaft New bearings throughout...

Hey guys, engines getting built ATM, do I dial in the stage 3 crow cam or do I just put the piston top dead center and line up the dots on the timing gears? Or do I need a dial gauge ?

Hey guys, currently rebuilding an ecotec and I'm at the stage if buying reco heads for $500 and a stage 3 crow cam, i read that you need head work Ect done, this true?

Hey guys, is the timing gear on the l36 the same as a l67?

The parts are much cheaper over there haha

Hey guys, just want to know if theres any cams from the us that will fit the ecotec no worries. Or is anyone has one for sale

Don't worry I will ! Ill pm you to let you know !

Hey guys I'm currently rebuilding a l67 , and I have everything but the crankshaft bearings and piston , so where can I get them?!

And other vy engine has #6 with a loss of 30 psi so instead of fixing that , go all out and use its heads and inlet Ect :) I'm so excited !

Yeah mate for the rear mount turbo :) just bought a machined l67 block, new oversized pistons, rings, cam, everything! So I won't worry about breaking it when I'm running boost! I have ordered all the turbo oil lines Ect and got a mint turbonetics turbo ! Oh and l67 has a new machined bottom end :)

Yeah can you :)??

would they work the same?

Hey guys, are the plugs and leads the same on a vs - vy?

its strange because when i changed the head gaskets ect i cleaned EVERYTHING including them, he's changing the throttle body over with my original vt one to see if it helps, apparently its miss firing too :(

Hey guys, just had a mate swap my engine over, and he put a vy ecotec in and the cars idling at 2000rpm, and has thrown an engine light! any mechanics in melbourne ( around balwyn 3103) that can check over vacuum hoses act, must know exactly where everything goes :) thanks guys! $ is offers

Hey guys, just had my vt engine replaced with a vy one and now it's reving high with an engine light? Anyone got a diagram for the box at the back that has all the vacumme hoses connected to it?

Search mattyvt93 on YouTube? He's got a 4 part video on how to do it

Check if all injectors are clipped in

Hey guys, currently turbocharging my vt v6, what injectors are best for 8psi and what fuel pump can i use?

man id pull the think apart and check over it, don't want a flywheel coming loose! also check for a missfire , also vibrations may be the cause from a single mass flywheel

haha post them up! did you torque the bolts?

I have read that the dip stick may be to thin? and cheers!

Hey guys! im building a turbo set up and the end date to soon to come :D Just need to figure out where i can tap in my water lines for my turbonetics turbo and where i can return my oil lines? i have a T piece from the oil pressor sensor so thats all good but where can i return the oil without...

So long ones next to the rockers haha

Long ones on the top and short on the bottom :) did them today! Use a torque wrench ! And do them in sequence !

You should ask your mate Nick with that sick VT

Hey guys! Currently getting everything ready for my turbo setup, but any ideas how to fit oil lines and water lines? I herd there adapters for the oil pressor sensor. It's a vt v6.

Hey guys ! All of a sudden my front end squeaks when I hit bumps and if I brake hard ! I had pedders sports Ryder shocks and springs installed on the front and he said my bearings needed replacing but I couldn't afford it, could that be it? It doesn't squeak when I push down but if I'm...

I just had heads off and inlet manifold Ect, no bottom end ****!

Thanks guys! Ill grab a torque wrench today! And head bolts ! And thanks hammertime!

Hey guys I'm about to put in the engine I pulled apart and worked it Ect .. Anyway do I have to replace the head bolts and have to use a torque wrench ? Because I reused mine and just tighten tight all around haha

I have a holset turbo, used many times on petrol cars , it's rebuilt which is good! I purchased 2.5" exhaust piping that I will use to custom make the whole set up, only costing me $23 per 1m of mild steel! Anyway I don't want to reveal to much ! I accept any critsisum anyone has! But didn't...

Yeah so ill chuck in an oil cooler haha

I didnt read the whole thing haha but check the Thermostat or drop the lower hose and bleed the whole thing with a new thermostat