Search results

Im getting some quality wheels for my falcon. When I sell the car, I want to keep the wheels and put them on my SS

Yes, and I just realised I will need to change brake rotors too...

Hi guys, is it possible to change the PCD on a VZ commodore? Is it simply a matter of changing the wheel bearing hub to one with the desired PCD Thanks in advance

Did you bypass the radiator?

Hey Guys, I have a modified 2006 VZ SS THUNDER UTE. Im thinking of transfering the complete engine, auto, diff, coilovers from the ute, into a VZ Wagon. Has anyone done this? Will I need the wagon to be a V8 one? in terms of legalities etc, I will be selling the ute off with the wagon...

Use the tub liner, and get a rubber mat - *stops most stuff rolling around* I have the back of mine full of plactic trays and tubs etc.... no need for straps or anything

Has anybody heard any good or bad things about Fenix Radiators? They look good, and with various drift cars using them etc they should be built tough, and for keeping the temps in check. Fenix Autoparts I may be in the market for a new radiator and was considering getting a full alloy one...

Im guessing its the link pins too

I was thinking of doing this, but I really dont want to. Just one??

Its auto mate

Update: Fitted a new brake switch, cruise control still wont engage... Ive adjusted it correctly, has got me puzzled!

L98's are a noisy motor, full stop! :) I use 10/60 Castrol edge for maximum protection.

Hey guys, Im wanting to install a guage binnacle in my 2006 VZ SS - with climate control (has the the popup storage bin compartment on top) After searching here, and a few threads on the LS1 forums, it soon becomes confusing.... Im wanting to install aftermarket guages (not the standard HSV...

May be a dumb question, but do the wiring harness connectors pull straight out? no clips to push in, as you pull the plug out?

Any help on how to adjust it? Obviously I want to try this before I have to replace :)

Should mentioned I had a scanner on the car. Picked up the code - CO161 - Brake switch Circuit Malfunction

Yes I have, but that mod was done a good 1.5 years ago - no problems until now. I didnt just replace the globes, I installed the proper kit with resistors etc...

Yes another cruise control thread... Car is a 2006 VZ SS The cruise control will turn ON, but it will not set the speed. Brake lights are all working. Ive been told its the cruise control switch under the dash on the brake pedal, and it will need adjusting/replacing. What part do I turn...

I think I have the same problem. This only started to happen once I put new driveshafts in though, I didnt hit the sensor there, and its all clean too I cant remember as I rarely drive car... but does the dash say the cruise is "on", once you press the button. Then "engaged" when you twist the...

I have to do this again!! haha but this time the front one, at the transmission. Is there anything different I have to do to replace this donut, or is it relatively the same procedure?

I have to do this again!! haha but this time the front one, at the transmission. Is there anything different I have to do to rplace this donut, or is it relatively the same procedure?

All good, thanks guys. Hardest part was putting the exhaust back on.

I have a aftermarket exhaust, its in the way lol. So its really that simple, so that (inner shaft) I mentioned has no effect on the procedure?

Hi guys Just after some guidance on taking out the tailshaft on a VZ SS Ute - automatic. Need to replace the rubber donut at the rear. I know to reinstall everything the same as how it came out, just unsure on the (inner shaft) that goes into the diff and gearbox... Currently the ute is...

I also would like to know where this clutch grommet is! Only possible openings I found where the bonnet release cable hole, and a much huge rubber grommet that sits about 4 inches away and slightly higher

Clarion deck Soundstream pro splits, Im happy with how these sound un-amped :) Soon to have dynamatted doors, in the post as we speak.. Just want abit more bass, probally still, even after the dynamatting lol

I should mention Im not after serious bass, like most are chasing when they are wanting to get subs.. just a nice solid sound down low. Does this change your opinion fun bucket? Like you mentioned, I'll rather go this way as I dont really want to loose any space in the cabin

Hey guys Just wondering is anyone using the Soundstream USB-8A Powered Subwoofer?? Its a sub, amp and box all in the one unit.. What are your thoughts? It will be going into a ute, with soundstream splits

Thanks mate Fitted the mdf rings today with abit of silcone too. Another question, is it safe to assume the wires on the other side of the plug (from the door) are the same corrosponding colours as the speaker wires at the door?

Thread dig yes! How did you mount the 6.5" splits to the factory plastic pod? Did you screw the speaker right on the outer edge of it?

How do people get around fitting the 6.5" into the door, spacers? Is that the name?? My mind is blank atm haha

Quick question Im about to wire in some 6" splits to the front doors of a VZ. Is it as simple as getting the speaker wire from the door, then into the crossover, and wire both the speaker and tweeter to the crossover. Do I have to do anything with the existing tweeter wiring, or just...

I want/need more cooling..

Any opinions?? radiator is about 2 years old

Long story short, I have bypassed the radiator to cool the trans, but did not plug the transmission holes in the radiator... Just wondering if it will be okay to plumb up it back up through the radiator again (unplugged for 2 years) I dont know if Im worrying to much and a good flush is...

I put the dna aerial booster in mine yesterday, works good. Just dont buddle the excess cord together....

Is the "antenna up" wire white? and the blue antenna down?

Hi Im wanting to install a dna aerial booster in my VZ SS, standard headunit. Antenna is getting removed/guard smoothed/shaved out.. The instructions on dna's website is pretty straight forward user-guides Has anyone done it/ is there a how to guide?? haha

Mine does this but at 104kph, after fitting new front bushes and coilovers Any ideas? Seems a pretty common thing after getting the front bushes done...