Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. L

    Running factory amp with aftermarket H/U

    I already have the adapter to suit. So it's really just plug and play?
  2. L

    Running factory amp with aftermarket H/U

    Hi guys, I have recently got myself a VZ thunder ss. I just wanted to know if I can run the factory amp and sub with a aftermarket head unit so i can play my phone though it? Thanks Lucky
  3. L

    Fast blinkers.

    Just chuck in some resistors and they will be as good as new
  4. L

    idling issue

    Ok. Thanks mate I'll have a go and see what I find
  5. L

    idling issue

    It has the supercharged v6 in it with the 3.4" (10psi) pulley. That's why I run 98. The oxygen sensors were replaced a bit over a year ago when I did the conversion. I will have a look into maf sensor and see what I find. There is no engine light coming on so I'm guessing there will be no...
  6. L

    idling issue

    Hey guys Just need a bit of help. I have a Vy with the l67 in it, it's having trouble idling when it warms up. While it is cold it's fine and while driving it's fine. The idle just drops and near stalls and picks up again and eventually stalls while is playing up it blows a bit of black...
  7. L

    L67 manifold gasket oil and air leak

    Should just replace them. They aren't expensive and not hard to replace if your handy. Definitely get the steel gaskets not the shitty plastic ones
  8. L

    Diff , rear end banging on hard acceleration

    Will do. Just have to find the time to do it.
  9. L

    Diff , rear end banging on hard acceleration

    My vy does the same thing. I had it up on a hoist last week and there is a heap of movement in the cradle mount so I think it's only a worn bush
  10. L

    vz issue

    Hey guys The brothers misses has a vz crewman v6. One day last week she went out and started it in the morning it started fine and ran. While she was hosing the frost of the windscreen it stalled and won't start again. I went and had a look for her yesterday. It has spark and is getting...
  11. L

    Starting issue after engine swap.

    You need the bcm and key head from the donor car. Or get someone with a tech2 to liken the ecu and bcm
  12. L

    Vf Front badge removal

    Just get some fishing line behind the badge and pull the line all the way under the badge. The you can peel the sticky crap off with your fingers
  13. L

    single to twin exhaust

    Hi guys I have just put a l67 into my vy exec. Everything is in fine but I can't seem to get the twin system to mount up properly where the intermediate mufflers are. The left muffler is alright but the right side touches the tailshaft. Will I need to get something made up or am I just not...
  14. L

    vt gearbox plug

    Ok thanks. so won't matter it's missing
  15. L

    vt gearbox plug

    The harness I brought only has the bigger plug
  16. L

    vt gearbox plug

    Yeah both v6 auto. The vt/vx have the 3 plugs on the driver side (near strut tower). I'll get a pic when I get a chance.
  17. L

    vt gearbox plug

    Hey all I am putting the engine and box out of a vy into a vt. I have purchased a wiring loom to suit but I have noticed there is only one plug on the loom that goes to where the selector shaft enters the box. Is this going to cause me a hassle or is it how the vts are? Thanks lucky
  18. L

    Vk efi 304 conversion????

    My mate is doing the same thing. He got a power steering shaft so I guess that's the one you'd need
  19. L

    Oil level warning

    Check the wiring to the pressure switch isn't shorting on the sump
  20. L

    clonking from rear

    I think it's more driveline related. But I'll check them anyway
  21. L

    clonking from rear

    I had the car in at pedders a month or so ago. The only thing they faulted in the rear was the shocks which have been replaced. It's a open diff. Haven't checked level but a fluid change is on the things to do list
  22. L

    clonking from rear

    That's what I replaced yesterday but made no difference.
  23. L

    clonking from rear

    Yea tail shaft is ok. Maybe due for a centre bearing soon though. But I think if that was the cause it would do it pretty much constantly
  24. L

    clonking from rear

    Nothing in the boot but sub and amp
  25. L

    clonking from rear

    My vy has just started to make a clonking sound. It only happens while turning corners at intersections if I give it a bit and sounds like it's coming from the drivers side rear wheel. I have just changed the drive shaft but hasn't made a difference. Anyone have a possible solution Cheers
  26. L

    vn no power

    Ok guys. Horrid was bang on the money. The earth strap from the battery to body had some broken strands and was pretty mangled so pulled it off and put the one off my Vy on and it was perfect
  27. L

    vn no power

    Alright thanks guys. I'll spend some time on it on the weekend. Any other suggestions welcome.
  28. L

    vn no power

    I don't think the cas would cause the car to have no power at all and no leaks. It runs sweet when it goes but just getting it to go is the problem
  29. L

    vn no power

    The battery terminals are ok I have checked all the earth straps I could find. But I thought there was one under the oil filter somewhere but can't seem to find one there. But the one from battery to body seems fine. I'm going to buy a multimeter some time this week and give everything the once over
  30. L

    vn no power

    Hey all. One day my brother was driving his vn and he stopped to go into the shop and he came back and he got in and turned the key and got nothing. No dash lights radio headlights nothing. After half hour of fiddling with it it started. Now ever since it dose this 1 out if 3 starts roughly...
  31. L

    vy trouble codes

    Thanks for the reply. I've got 2 but I know one is for the srs because I've installed a calais dash. And the other is the first one on the second row as you have shown. The only reason I asked is because the fuel gauge has begun to play up but maybe unrelated. Thanks
  32. L

    knock sound upon acceleration

    Could also be diff backlash
  33. L

    vy trouble codes

    while in engineer mode on the dash when I scroll along to the trouble codes (a couple of rows of 0s). but I have a couple of 1's on mine so I just want to know if anyone can give me a list as to what they stand for? thanks lucky
  34. L

    Vy head unit prob

    Hey all. On the weekend I purchased a Kenwood double din head unit and installed it into my Vy. But the facia that came with the mounting kit is to small to fit around the hu and to big to fit into the dash. My question is are there different sized facias available or do I have to modify...
  35. L

    VY Boot Garnish

    I don't see why it wouldn't. It looks to be the same
  36. L

    Exhaust Guru's...

    In tassie ya can drive whatever ya want when ya want. None of this no "high performance vehicles" while on p's bullcrap
  37. L

    Anyone have a Scantool Newcastle NSW AREA

    Get a vid and post up of the paper clip scan tool. Someone will tell ya what it is
  38. L

    strange thudding sound

    Hi all The last week or two I've occasionally heard a soft thumping noise. This morning I took a different route to work that contains a fair bit of highway driving. I figured out that the noise only happens between 80ish and 60 while rolling. If I brake or accelerate the noise disappears. It...
  39. L

    Oil Temp switch or water Temp what is this

    Looks to be water to me. Sender for the dash
Top