Search results

Never mind worked it out. Was missing a power wire all good now

Hey everyone got an electrical problem with my vs after doing an engine swap. I have 12v at the battery, alternator and starter but not getting power elsewhere. Nothing at the fusible link/fuses no lights/dash lights coming on nothing! Checked all fuses they look good, battery is good. Anyone...

Don't waste your money you will regret it

Get one off eBay or find a good 2nd hand one from the wreckers

+1 I would love to replace mine for my new engine setup and maybe have a spare. Tried cleaning it but no luck. Been looking for ages and can never find any new ones

Hey I found a set of pacemakers with y piece that came off a vs L67 statesman. Just wondering if they will bolt up in my vs L67 commodore?

I dropped a l67 in my vs 2 months ago it's a straight swap. Make sure you have motor, box, loom, ecu/memcal, air induction tube, top radiator hose, throttle cable as it longer. I found it easier to take the supercharger off to get the engine and box in have a lot more room and loosen the engine...

Hi everyone, my sister has a 98 sb barina 1.4l for a while now when she puts it in reverse nothing happens then the car will jolt back and start reversing then it will stop and just rev then jolt back again in gear. I've checked trans fluid that's all good doesn't smell burnt, not over full. I...

Hey everyone I own a vs v6 and my engine and box is getting tired and making some noise so for my 1st conversion I've decided to go down the l67 path instead of a bolt on supercharger. I've found a couple conversions for sale (eg: VT-VY l67 motor, box, loom, ecu CV6 monaro l67 motor, box...

Hey everyone got hold of a tech 1 for my vs for the weekend. What would be some good tests to do? Cheers for any tips.

From what I've read you will need. (Correct me if I'm wrong) ? Marks are the ones I'm unsure about. Engine Trans with higher stall convertor Tailshaft? Top radiator hose Fuel pump (plus wires from pump)? taller charcol canister? Intake tube Loom Memcal (chip with bcm number?) L67...

Got the same problem with you parx. Got the cash but not sure what 1 to choose. If l67 I'd wanna get the engine rebuilt while it's out but if I go raptor my engines good and it's easy so just bolt on and drive.

Mount it on the A-pillar? It will be in plain sight then

Hi just wondering if there still for sale and are they for a vs v6 auto? As vt-vy are different to vs. How much would postage be to south morang Vic 3752?? Thanks

I got a 4l60e gearbox for $50 in working order and I'm in the process of doing a full rebuild and a stage 3 shift kit for something to do as a project. I have been watching this on how to pull it apart and put it all back together. Pulling it apart...

Get a couple people to push it on the trailer maybe??

Still after a LSD diff anyone have one? Sent from my iPhone using Tapatalk

I've got a similar problem with my roof lining. The fabric isn't peeling away from the cardboard but the cardboard is dropping at the back. How would I go about reattaching it to the roof?

Anyone know the rules for Vic if you put a supercharger on

If I'd go the l67 I would want to get the motor rebuilt then mods which will prob cost more then the raptor kit

In having the same dilemma trying to decide l67 or raptor but mostly going for the raptor kit Sent from my iPhone using Tapatalk

If it was me I'd keep the s pac. Anything wrong with your car? Do you have any more info on the caprice? If the diff is stuffed how is the auto/engine/supercharger holding up? They could be on there way out and you would have to put money towards getting stuff fixed/ roadworthy while they have...

Bump cash waiting

Could have a air pocket. Have you bleed the system?

DESCRIPTION: Wanted to Buy ITEM: Holden VS Sedan live axle LSD diff in great condition!! LOCATION: VIC Northern suburbs CONDITION: Used/Rebuilt DELIVERY/PICK UP INFORMATION: Can pick up and willing to travel a little bit within reason or meet halfway PAYMENT OPTIONS: Cash...

Willing to separate? If so how much for the pioneer splits (silver speakers) and postage to South Morang Vic 3752 Thanks

heres some pics of how it sits now. will the camber bolt help out this? the tyre doesnt rub on the side just that round part where the spring sits in

So I got my wheels put on 19x8 with 245/35 tyres and now when I go over a bump in the road the tyre hits the left front strut tower. Is there anyway to fix this?

Going by the Gregory's book it says Torque the bolts to 18-22nm on all models except series 2 manual transmission models tighten the bolts an additional 47-53 degrees. On series 2 manual transmission models tighten the bolts an addition 80-90 degrees using an angle gauge

Thanks for all the replies back. Can't remember what the exact tyre size is but I'll use that link Saturday to give me a rough guide. jyplht would a jaycar speedo correction kit be easy enough to use or could I get my memcal re-tuned?

I'm getting a set of 19" wheels put on my vs on Saturday. I currently have 15" interceptors on it. Just want to know how much my speedo will be out at speeds from 40km to 110km Thanks for any help

Hey just wanting to know if anyone knows what the screw/bolt size is for the rear Venetian. Thanks

If it's leaking from the same spot where you undid the bolts then the sump would prob need to be re sealed. Any oil leak to me is more than enough to worry about

Anyone recently had a LSD put in there car? Jut wanna know if $1,500 is a decent price for LSD center shims bearing and gears??

Just want to know a rough price I'll be looking at spending to get a lsd center and 3:45 gears put in my vs v6 live axle. Got 1 quote and they wanted around $1,500 with new shims/bearings/center and gears. Still waiting for another quote Thanks

Depends on what's your budget?

Hi just wondering if I'd have any problems fitting a set of 19x8 rims on my vs sedan? My vs has super low springs all round it's live axle and the tyre size will be 245/40/19 Just wanna know if it will rub on the strut or wheel arches? Will I need a adjustable panhard rod? Will I need to...

It could be the thermostat housing that is leaking as it's been sanded back so it might be seating right as you might of sanded back to much or made it an uneven surface

It could be the inlet manifold gaskets leaking down the back of the motor or it could be the rear main seal. Do you have any oil in your coolant? Check your radiator cap for oil sludge

Think 1 is a purge (pcv) hose and the other is a breather hose