General Information
Hi Team,
This is our VZ ute project (sons and I). It started from nothing really - our VY V8S work ute hit a roo and was written off. We purchased her back from the insurer for $300 and ripped out the engine, box and diff, pacer extractors, X force cat back exhaust, and the harness/computers for use sometime down the track.
We happened upon a VZ ute shell, SS seats and interior and FE2 suspension for a song. The downside – sprayed in rattle can white with matt black DIY “racing” features, tub shrouds done in matt black with a paint brush and skirts painted in hammer finish silver. WTF were they thinking?
So far we have been paying attention to the go fast bits. New VCM 262 Cam, springs, dual cam chain and sprockets, lifters and oil pump. We have also installed a mantic clutch, replaced the front rack, added a new radiator and converted the LS1 from cable to drive by wire. A new ECU was purchased from LS Extreme as the VY computer wasn’t transferable. An OTRCAI is ready to go on and a MAFless tune is in the wings. Missing the clutch line, an alternator (of course they changed) and a couple of O2 sensors to get her on the road.
The interior is in average shape – seats are OK but as with most 15 or so year old seats need some work; as does the wheel. There is nothing to play the tunes with either. Will add a behind the dash UHF for comms as she will be our quote and run around ute. Fastest quotes in the area.
Panels etc – straight as except for the front bar which has some deep gouges along with a lot of superficial cuts and bruises, May just opt to run a 5 poster to deal with the roos. Apart from that no real plans except for some decent paint. We will de-badge the beast and run her as a sleeper until we get the time and beer tokens together to do the paint work.
Any thoughts or recommendations appreciated.
Cheers n Beers
Jolls
This is our VZ ute project (sons and I). It started from nothing really - our VY V8S work ute hit a roo and was written off. We purchased her back from the insurer for $300 and ripped out the engine, box and diff, pacer extractors, X force cat back exhaust, and the harness/computers for use sometime down the track.
We happened upon a VZ ute shell, SS seats and interior and FE2 suspension for a song. The downside – sprayed in rattle can white with matt black DIY “racing” features, tub shrouds done in matt black with a paint brush and skirts painted in hammer finish silver. WTF were they thinking?
So far we have been paying attention to the go fast bits. New VCM 262 Cam, springs, dual cam chain and sprockets, lifters and oil pump. We have also installed a mantic clutch, replaced the front rack, added a new radiator and converted the LS1 from cable to drive by wire. A new ECU was purchased from LS Extreme as the VY computer wasn’t transferable. An OTRCAI is ready to go on and a MAFless tune is in the wings. Missing the clutch line, an alternator (of course they changed) and a couple of O2 sensors to get her on the road.
The interior is in average shape – seats are OK but as with most 15 or so year old seats need some work; as does the wheel. There is nothing to play the tunes with either. Will add a behind the dash UHF for comms as she will be our quote and run around ute. Fastest quotes in the area.
Panels etc – straight as except for the front bar which has some deep gouges along with a lot of superficial cuts and bruises, May just opt to run a 5 poster to deal with the roos. Apart from that no real plans except for some decent paint. We will de-badge the beast and run her as a sleeper until we get the time and beer tokens together to do the paint work.
Any thoughts or recommendations appreciated.
Cheers n Beers
Jolls