Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

cam

  1. T

    Which cam to pick?

    Hi, Im deciding on what cam to buy. I have and VCM OTR but havent installed it yet cuz I didnt want to waste a tune if I was just going to get a cam later. Im looking for something that wont affect my drivablity much. Im on a stock 3.27 open dif GW6. L98 4 speed 4l60e. So far Im fully stock...
  2. D

    Auto VS Commodore Rough Idle in Drive

    Hey All, When sitting in traffic my VS has a very rough idle when sitting in drive, foot on the break. If i put it in Neutral the car idles fine. As soon as i take my foot off the break pedal, it settles down and while driving it runs really well. I noticed today if I am stuck in really bad...
  3. Jimbosa

    Cammed VE SS not making the power it should

    Hi guys first post, So I have a VE manual UTE with a L77 and its just been cammed with a VCM OTR, REX triple step headers and a 3 inch hurricane exhaust and its making 420rwhp but this cam is supposed to make at least 460rwhp if not more. these are the cam specs: HTP02 cam: 233/233 @-050...
  4. R

    Memcal Tuning

    Hi all, I just trying to learn how to tune my 1994 VR Berlina 3.8l v6. I am going to be running a big crow cam, valve springs and all sorts. I was seeing if anyone knew how to tune the memcal or whatever. I know I need to get a Eprom Programmer and a 28 pin adaptor. Do I need a Eprom Eraser...
  5. Rebt

    Installing mace stage 3 cam into ecotec

    So im doing a dirty rebuild on a s2 vy ecotec and iinstalling a stage 3 cam from mace. Ive been told that because of the double row timing chain, i have to get rid of my harmonic balancer. Just wondering how true this is, how safe it is for the engine, and how people have plugged the hole if i...
  6. W

    Cam ideas for W457 L77

    Hey guys, just looking for some advice on upgrading cam on my VF Ute. It’s currently running a W457 package, mantic 9000 and true trac. It’s not a daily drive anymore so I’m not afraid to open her up a little. Anyone Else done something similar that could share me some insight would be great...
  7. N

    Vf sv6 high stall converter

    Can anyone recommend the best and most affordable place to get a 3000 high stall on my vf sv6 in the south eastern suburbs of Melbourne? Got a custom cam done but lost lots of torque down low in the rpms as expected… Cheers.
  8. S

    Rebuilding an L67

    So I took the risk on an online bid for a full L67, turns out bottom end was blown out blah blah blah , top end appears to be fine and I have a replacement block , have new crankshaft/new seals bottom to top etc. next on the list is a Stage 2 Cam from mace, my questions are: 1. Will I need to...
  9. JaydxnKennedy

    Camshaft specs help

    Hi all, I have attached a picture of cam specs that came with my car when I bought it. 08 VE SS Wagon. Could anyone tell me anything about it? What is the brand? Can’t find anything online about it? Can it be readjusted/tuned? Anything else to know about it? Haven’t had a cam upgrade in a car...
  10. M

    need some help trying to sort out heads 241 vs 243s

    hi guys I know this topic has most likely been talked about alot. I have a hsv wk grange with 4into 1s with 2.5 all the way through running a 4l60e and 3.9s with a tru track in the rear and a 4k stally im looking at doing cam upgrade aswell as ls7 lifters and upgraded hi flow mellings oil pump...
  11. V

    H304/ 355 build spec thoughts

    Hi guys, Looking to build a 355. Been recommended the below build. Know it’s a bit basic on the details but you should get the idea. What’s everyone’s thoughts on this? What power do you think it would make? My thoughts were that a larger solid cam would be the go, but wondering what sort of...
  12. J

    What would cause this

    Hey guys I know I have been posting allot lately but I come across new things and I want to get it right, what would cause this lifter and cam lobe to look like this?
  13. J

    Vf Series 1 - performance and braking upgrade help!!!

    Hi. I’m slowly doing up a MY15 Series 1 SS Holden VF Commodore (sedan/auto). I’ve already installed new and improved OEM replacement pads and rotors too , and as this is intended to be a long term car, I thought the next step adjustment could be to and install braided steel brake. I do need...
  14. Rileymax1

    Vy ss idling erratic

    Got a VY Ss with a rebuilt engine 226/232@50 610 112 cam Higgins heads LS2 intake manifold Holley tb Vcm otr Brand new TPS, iac, oil pressure sensor, map sensor For some reason it seems to be getting too much air according to my tuner *we are having a look this weekend, I'm just trying to get a...
  15. C

    L77 afm lifters swapped to ls7

    So I have changed all 16 lifters and trays in my l77 to ls7, a new genuine cam (L77). They valley cover is l77 also. I bought the car and it never Dropped cylinders so I was assuming The dod delete kit was in Clearly not, no biggie. So currently It idles a bit low and threw up an oil pressure...
  16. Vk exec

    Vk 202 black motor cam selection?

    Gday everyone, just signed up to this forum and not quite sure how these things work as of just yet but I’ll get there. I’ve got a 1984 Vk with a black 202 3.3L she’s got extractors and a decent intake on her already. It’s my first car, I’ve grown up around cars my entire life and have rebuilt a...
  17. L

    Cam package

    Hey guys I have a Ls1 vy calais with a few small mods nothing internal an thinking of doing a cam package but just don't know what I'm really in for I don't use the car as a daily so I am looking for something quite lumpy was just wondering what is a good cam kit to go for and roughly how much...
  18. Adrian's Vr

    what Cam are u running in a buick!!!

    hey guys, what cam are u guys running!! I will run better springs too, i got vy injectors and a v8 aeroflow pump so runs smooth, healthy motor, cai, extractors, want good power, sweet sounding but still good enough to drive as a daily, preferably no tuning!! Let me know what u guy recommend...
  19. TrickyH

    Cam and head before and after dyno

    Hi, just for fun, any guesses what HP and rwkw I’ll end with after having Hi-torque performance do a cam (224/230) and cnc head package (no stally, keeping stock) done on my car? I have a 2009 VE SSV AUTO L76. Current engine mods- 2.5” S/Steel KPM catback / Hi flow cats / Pacemaker headers...
  20. N

    Double row timing chain alignment

    Hi guys Just got a cam and rollmaster double row timing chain installed and degreed by my mechanic and I’ve notoiced that that crank sprocket for the chain sits 0.35mm closer to the block then the cam gear and the front of the teeth on the cam sprocket have scoring marks as if the chain is...
  21. Sam Droscher

    Blokes!! I need help choosing the right rockers for my cam

    Hey guys, I’m new to this joint and have only posted just once. Here is my second: I’ve been building my engine, I’ve never had any experience doing this or anything with engines but I’ve always had a passion for going fast and nearly killing myself. I’ve got a VZ SSZ Ute and I’m done pretty...
  22. Mattricho

    Cam upgrade and supporting accessories

    Hi all I have a question about cam upgrades and supporting mods. So I’m looking at getting the VCM 11 Cam kits with dod delete https://vcmstore.com.au/collections/camshaft-kits/products/vcm-performamce-ve-vf-dod-cam-package?variant=16601483332 I’m getting a VCM OTR at the same time so that...
  23. R

    Need help. Gearbox related

    Gday guys. Ive got a vt l67 with decent cam and some go fast bits on it. Its Got a shift kitted 4l60e and a standard v6 torque converter. Was giving it abit of curry one night and it just made a terrible sort high pitched sound from the gearbox area and just came to a stop. Wouldnt move you...
  24. E

    VF SSV 2014 L77 Upgrade / Mod

    Hi All, I'm looking at upgrading my 2014 SSV VF Commodore (Auto) and have very limited experience/knowledge other than what I've researched to get me to this point... I have recently upgraded my cat back to 3 inch Xforce and now looking at getting the Xforce 1 7/8" 4 into 1, OTR Intake Kit...
  25. B

    Cammed 2005 VZ SS, Yellow sticker.

    Hey new here, I bought a 2005 VZ SS Gen III LS1 5.7L, 4 speed auto. ( about 6-7 weeks ago ) I've got a lot of questions about the car but ill start off with the fact I got a yellow sticker a few days after driving outa the car yard. Also being an idiot and fact it was from a car yard I didn't...
  26. S

    Ls1 cam kit cost

    hey lads and ladies, So I recently had my vy sv8 upgraded with a cam kit including tie bar lifters, custom cam, springs, push rods, heads machined, reseated all valves, new head gasket, timing chain kit, arp balancer bolt and cam bolt set, front engin gasket kit, intake gasket, cam backing...
  27. S

    Ls1 compression

    Heyy all, I am looking to boost my compression right up to make a very tuff NA car, something like a sprint car engine. I have done the cam already with a custom grind cam shaft (unsure of specs) heads have been machined and all head work done! Car made 398hp atw Has anyone ever gone over...
  28. S

    Ls1 upgrades

    Hey so needing some opinions about puting 317 heads and l98 piston heads and rods in my ls1. ATM just looking at putting a vcm 13 cam, have many people used this if so with what combination of supporting mods and what power, and than looking at force induction when money is saved. Please post...
  29. L

    Cams

    i need to replace my cams and thinking of putting in mace 210/210 cams but i can't afford the dyno tune yet. If i put them in will it throw engine codes?
  30. Black Pearl (Rocket 88)

    Black Pearl (Rocket 88)

    Turned to the chief scrutineer for V8 Supercars, Craig Hasted of Cragsted Race Engines to transform my eco L77 into a very high performance engine that delivers ultra efficiency: Some build shots: OEM+ look hides a max effort NA build - $1000 bolts, $800 studs, custom forged guts cranks same...
  31. 7

    Dual valve springs causing excess noise?

    Hiya's I had a L77 engine in my VE with a cam which never had the DOD delete done at install or had dual valve springs put in. It sounded like a sewing machine, so I had the DOD delete done and it was much better. A few months later a valve spring gave way and rooted my motor so I got a new...
  32. AZ_SSV

    Worth changing lifters?

    Ok guys so I'm thinking about doing a cam changeover (vcm 21 kit) and wondering if it's worth adding lifters to the shopping cart. I'd think it would be a no brainer but thought I'd ask u guys. Doing the standard vcm Otr and 1"3/4 headers with 2 1/2" system. 07 Ve ssv l98 sedan. Stock. Cheers Az
  33. 2

    VE V8 rev limter

    Hey guys, having a cam 224/230 in a 2008 auto V8, is there any point with increasing the factory rev limit ?
  34. 2

    Isky racing cam

    Hi guys The previous owner installed an isky racing cam on my 2008 v8 auto Calais , it's a 224/230 with duel lunati valve springs, I've tried to find out information on this cam and can't really find much info at all, does n e one know much about this cam , and what it's purpose is for ( low...
  35. N

    VZ SV6 Cam

    Ok guys, I am wanting a cam upgrade for 2005 vz sv6, I have seen other posts however none answer my questions. As we all know the alloytech 190 are difficult as hell to get a sound out of, im wondering how this will effect a cam. - Will this sound like crap - Expected power? - Video if anyone...
  36. R

    Yellow stickers and Cammed HSV

    I got the exhaust and cam done on my GTS ,now I am told I need to get a permit from the licensing department so I dont get a yellow sticker.So I am worried if I take it to the licensing centre they might say ,no mate you cant drive it on the roads like this.And I will be $7000 in the whole. VCM...
  37. T

    L98 stock cam needed

    Gday guys In the next few weeks im doing the lifters and timing chain in my 07 ve stato L98. Im just replacing the parts with stock parts as its just an everyday driver and don't want to go tune it or anything. I can find everything on ebay I need except for a stock L98 cam. Anyone able to...
  38. A

    Ve ss cam recommendation for all round benefits

    I would like to know what cams there are out there for all round performance and economy for my VE SS 06 Manual there are heaps of automatic cam recommendations on here although not any manual ones that I have found I'd like to know what cam is going to give all round performance, I don't...
  39. Vxcalaisv8

    [LS1] 220/220 cam only

    So i have just dropped my 2000 VX Calais LS1 to Gareth at Willall Racing in S.A for a 220/220 comp cam and valve springs. When i bought the Calais it already had 2.5" xforce system with hi flow cats and extractors, OTR with maffless tune, shift kitted and LS1 edit. It made 226rwkw on the...
  40. C

    installed harrop charger, some tips on a few things please?

    Hey guys, so update on my car, ive just recently installed a harrop hh112 top mount supercharger kit to my 06 vz ss l76.. ####ed the lifters and bent a push rod first install coz i didnt know you had to remove the dod lifters lol.. so off came the heads and charger and replaced all push rods...
Top