clubsport

G'day fellas. Looking to do a manuel swap on my vz cluby. I've been informed the process can only be completed with a vz clubsport manuel harness as the speedo plug doesn't work with the vz ss harness. Any information would be great. Also has anyone used one of these harnesses provided by...

Hi there, I’m wanting to convert my dull green cluster globes to LED/SMDs. Unfortunately I’m not all that good at soldering, is there anyone in the Melbourne area who still works on these clusters that can help me with mine? I’m willing to pay for the service. Cheers

Hi everyone I’m new to this page. I’m after some help with my vs clubby. I purchased the car three months ago. When I looked at it the old owner said the car randomly cuts out. I still purchased the car and now I am trying to work out the problem. Some time it starts and runs fine and won’t do...

Hi guys/gals Ive just bought a 95 Clubby and she has a few issues to get sorted. First one was getting the dash working properly. I replaced the Dash facia as for some reason the one that was in the car didn't have a speed alert just a coin tray????? I got hold of a new surround with a speed...

Hi all, I was wondering if there was anyone on here who would have a good idea of how the evaluation of E3 R8 Clubsports will be in the next 1-3 years? I currently own an e3 r8, it has 205,000km on the odometer but did have an engine rebuild back in 2020 and have done around 60,000km on the...

Hey I have recently given my 01 vx clubsport r8 a repaint. I how ever failed to note the location measurements for the sideskirt, front guard and boot lid decals/stickers. Does anyone have the measurements and locations for them? I saw a while back a diagram of them but can't find the link...

ITEM: 2x VN VP Sedan Chrome Quarter Windows selling as a pair. Date stamp is 91-93 as shown in photos. May fit VR VS but VN/VP are longer and has 3 extra holes Glass is in great condition and the mount bolts are all there. Chrome surround does have some marks, but overall great condition...

keep vp clubsport with 140 thousand k’s original or modify it?? Thinking Engine work with charger plus supporting mods

Hey everyone Im really hoping for some assistance if possible My e3 clubsport screen I'd very intermittent with this fault the display sometimes works, other days it doesn't. All sound and AC works it's purely just the actual video display. If I push on the screen a little bit, it comes on...

Gday all, just wondering if I can put a VY Clubsport rear bumper bar on my VY Lumina? I know some VY have bigger tail lights but I can’t seem to find anything about the Lumina models. Cheers Lucas

ITEM: HSV VF 340 Pack (2.5 inch) mid section exhaust Stainless Steel mid section with flexible flange for rear muffler bolt-on Front flange fit cut short for multi-fit option.. will need to weld flange or OEM join depending on use. Same mid-section system as VF GTS and as fitted to the VF...

Hey guys I’ve decided to finally throw some new wheels on my e3 clubby and I want to make it have a wider wheel looking at getting 20x10 on the front and 20x11 on the rear, I’m going to get my guards rolled and all that but I just want to know if anyone has these size wheels and knows what size...

How does the VE GTS and the VF R8 compare (mainly engine wise)? Which would you choose and why?

Hey Commodore owners. Desperate for information but not sure how active these forums are. I’ve recently done a cut out into my standard VS executive bumper. And I was in the market for a Manta grill; I know now, how hard they are to get, and expensive in today’s market. So I present this...

hey guys , just wondering if any of you guys could help. I installed some clubsport seats into my VU everything seemed to go well changing the rails and panels and stuff but the clip seems like it's a different size same shape but slightly bigger diameter. help‍♂️

G'day, unfortunately I have had a rear end prang in my chubby wich has damaged the rear boot and rear bumper. So what I would like to no, can I save abit of money and buy a Vz boot lid and transfer the badges and everything else and then will it fit onto my hsv Or are they different? Thanks in...

Hi all, I Have noticed a vibration around 2000rpm (comes around then, then goes) and maybe at a higher rpm, hard to tell. Ive done a oil change and noticed very small shavings in the oil, some appear to be copper? what should I be looking at before I make the call to strip the engine down...

I'm struggling at the moment aside from a small rwkw boost finding a huge difference between the 2007 6Ltrs 307 and the 2008 6.2Ltrs 317. Stock out of HSV with out any other mods, which is the smarter buy?

Hey Guy's, As title suggests my VY S2 Clubsport's battery in the key is dead and the car is dead locked. The car's battery isn't dead however I cannot get into the car. Have tried turning the key right hard even while lifting the handle and it's a no go as the key started to bend. Have also...

For a few years I've been contemplating the idea of a project car but never settled on one. About a week ago, a friend who owns a 2004 Lumina SS (that he practically left for dead in his garage) couldn't find a way to get rid of it, so I offered to take it off of his hands for a small fee. And...

Will Maloo/clubby VE’s seats fit in my series 1 SSV ute.

have just converted my vs clubby to manual and have a 355 stroker in it with a manual loom and computer from a vn ss . It has a high idle and I’ve found there is no signal or power to my iac valve. Probed at both the connector and pcm. Any idea what to check next ??? Or what powers those wires...

I have a VP club sport HSV have had it for years and a while back it was stolen and the plates and tags where taken but still has the vin on body now Im wanting to know if I can get new ones made or issued if I give the vin as I am giving it a full restoration. Please any info would be highly...

Can anyone point me in the right direction on where to buy the inner gear lever boot and floor pan bracket that rivets to the floor on a manual vs?

Hopefully someone can help. I'm completing a manual conversion in my vs club sport but for some reason the clutch will not disengage . I've checked the cable and pedal which all seems fine. But the clutch is stuck on the whole time. The clutch and thrust bearing are brand new. Any suggestions...

Hey guys just posting to see if anyone has any Haltech E6GMX tunes/maps lying around for a supercharged 5litre? or just a stock n/a 5litre tune to start me off ? cheers!

Bend the chassis on my ve r8 with very little damage to everything else . Am going buy a omega or cheap shell to transfer all running gear interior etc any tips? Guessing all ECU need to be swapped I know it would be easier to transfer to a ve ss or v8 shell but I am in nz and these cars are...

Has anyone put a ve e3 clubsport bumper on sv6 series 1, I understand you also need the bonnet too match, but how would you get the daytime running lights to work, and does the bumper actually fit?

Hi

Hi, I have a vt clubsport which has the fog light switch in the dash below the headlight switch. My dash facia is cracked and I want to change it out but all the ones I have seen with the fog light switch already there are super expensive. I can get a normal vt dash facia without the hole...

Just wondering if anyone knows if the body loom is the same between E1 Clubsport and a VE omega? We have a wrecked clubby and an Omega to transplant the drive train into. We have the dash loom removed and was wondering if we have to take the body loom too from the clubby? Cheers

Okay so the problem started a few days ago I was driving home accelerating quite hard and heard a large metallic *bang* and metal shrapnel go all over the road. I had pulled over and turned the car off about 300m later checked under the car, saw nothing. As I went to start the car back up all it...

Very new here, so im really sorry if this has been asked in the past. As the title says, im just wondering if a bootlip spoiler of a series 1 VE (SS,SV6 etc) would fit on a R8 Clubsport Series 1. Thanks alot!

Hi All, Has anyone here put the spoiler off an R8 Clubsport Sedan (VY) onto an SS Sedan (VY)? If so did anyone have any troubles and are there any pics around? The whole car is getting re-sprayed anyway so not that worried about paint/colour related issues, just wondering if it would be an...

Hi guys, I own a Gen F clubsport and a VE2 Maloo R8. I've thought about selling the maloo but have decided to toy with upgrading parts of it instead of an entire upgrade. What I have in mind is to purchase a genuine Gen F front bar, lights, bonnet & sides (few thousand) then attempt to...

Replacing the tailshaft on my 2003 VY Clubsport, however in NT, a tailshaft to suit a manual sedan V8 are rare as hen's teeth. Can I use a tailshaft from an AUTO sedan V8?

hey guys, just wondering how much of a hassle it would be and thr rough cost of putting my t5 from my vs exec into my clubsport and what needs to be changed to fit. Any help appreciated, thanks.

ITEM: Original stainless steel, complete VZ Clubsport exhaust system from manifolds to tips. Includes genuine HSV gaskets for cat back and rear muffler section which are brand new, and manifold gaskets that are used. The rear oxygen sensors are also included. LOCATION: Victoria, Warrnambool...