commodore

Hey, at a loss right now.. Rear passenger foot well is wet. Has been for a week have had some rain but nothing major/flooding. Sidewalls of carpet dry, bung still in place on sidewall and dry to touch when removed. There is a seal seam, which I’m thinking maybe pin hole coming through...

hey guys I'm currently on my green ps getting my opens in about a year ive got a 2004 vy storm s2 v6 and i was just wondering if youse think i should wait and flog it off to buy a v8 when im on opens or invest some money and time into this car i dont mind it but i just think its a waste of time...

hello everyone i am a P plater and i want to do as much to my 2003 vy ecotech as possible but as discrete as possible what are some of my options?

I have a problem with my vy l67 whenever you go full lock the power steering rack o ring breaks and leaks power steering fluid anyone has this before?

Hi All, Any VZ/VE V6 Manual owners out there able to help me out. I recently bought a VE SV6 Manual. noticed that the shifter was quite stiff when going into 1st and 2nd gear. all other gears mesh smooth as butter and require a normal amount of force to get into gear (I'm using about 50% more...

I'm looking for what code is meant to be on my gear box as I cannot find the code. It's a 2000 wh statesman ls1 gen3 5.7l sedan. Thanks in advance

Hi guys. I'm fitting a L76 from a 2010 VE into a Hyundai IMax, and using the VE ECU and auto transmission. My question is what else do I need to carry over from the VE to make the transmission work? For example, PCM.

I have a 1998 VT SS 304 Ever since I bought the car (2022), the key buttons worked on and off. Some times the buttons would work, others not. This went for about 6 months, until it stopped working. I put a new battery in, but still nothing. There is no noise from any where in the car when any...

hoping to find out if a 1999 vt commodore came out with factory option for a side mount supercharger on the hsv model. Havnt had a chance to go check it out but will be going tomorrow. has been sitting since 2010 with low kms

Hey everyone, I recently bought a VT SS Series 2 LS1 from an old lady at a great price. After driving 400 kilometers home without any issues, I started it the next morning and noticed the temperature gauge skyrocketing on my way into town. I pulled over and checked the codes, which indicated a...

Got a 2009 VE and i think the trans is gone, starts and drives but at a stop light will be stuck in 3/4 and just rev out almost like its in neutral, anyone able to tell me what could be the problem cheers

Hey fellas, just wondering what exactly i would need to swap a VY drivetrain into a VX LS1? (Both Sedans) I have a complete VY donor vehicle and was wondering what i would need to swap over from the a VY Exec V6 to a VX Calais LS1. Would it be possible swapping the K-frame from one to the...

Hey guys, Recently bought a 2018 Calais V with AWD LGX V6. Coming home from Melbourne last night, temperature gauge was working and noticed about an hour later that hit had dropped to '50' and never moved. Have the typical thermo fan run for about 5 minutes after shutdown and no A/C. Scanned it...

https://drivingenthusiast.com.au/2024/05/for-sale-1989-holden-vn-commodore-nz-spec-camira-2-0l-4cyl-engine/ This is one that I have been keeping an eye out for at the auction. Has anyone ever driven one of these 2.0-litre VNs? If so, how was it?

My 2010 Ve sports wagon is overheating, I’ve held the radiator, replaced the water pump and done a radiator clean. It runs great with the heater on full blast I’m currently terminally ill so can’t afford expensive Mechanjcs costs so hoping it’s not the thermostat. Any ideas?

Bought myself a nice sv6 about a month ago, it wasnt running when i got it because i thought it was an easy fix turns out i was wrong! Anyways it has a fuel gauge error and no crank im not sure what to do as I’ve replaced the ecu pim and bcu, gone over all fuses tested coil packs and replaced...

Hey all, Been scouring the forum for an answer, can’t really find one for me. Was testing my car out today around the block, probs going max 40kmh, and I hit a shallow pothole and heard a pretty loud clang. Then the sound of something metal dragging. Thought I’d lost my exhaust or something...

This week I’m looking at at clean 150xxxks 1999 commodore vt for $4500, but the steering rack is leaking is this purchase going to be worth buying and fixing or am i wasting my time. Any feedback is appreciated cheers

Heya! I’m new to the whole idea of car modding, in the near future I’m planning on swapping my 3.8L with a 5.7L, I’m not at all worried about price as it’ll be a work in progress, but I’m just wanting help with the list of things that would need to be swapped out or replaced. I’m assuming...

hey guys, just replaced my front struts/springs with pre-assembled ones including new strut top bushes and when ive gone and installed them i have noticed that they have a large gap at the top. i have made sure that all of the nuts are tight and all of the washer are in the correct direction...

Hi everyone, thanks in advance for any advice. Ok so to cut a long story short my Speedo stopped working a while ago and using a solution I found on this forum I fixed the issue. I did this by using a multimeter and finding the track the fault was on, then using alfoil taped down with electrical...

Hey hoping someone can give me a hand my vy ss electricals cut out when at high rpm for example my Speedo\rpms stop working for a couple seconds abs and battery light turn on and traction kicks in but it only all cuts out for a couple of seconds after the rpm’s get to high I was thinking a...

Hi there, I’m wanting to convert my dull green cluster globes to LED/SMDs. Unfortunately I’m not all that good at soldering, is there anyone in the Melbourne area who still works on these clusters that can help me with mine? I’m willing to pay for the service. Cheers

Hi everyone After 9 years of use and a little abuse, MUMSVX is getting a closed door respray and going to my daughter who is on her L-Plates. Respray work is being done by Shane at Rosedale Panels in Victoria. He is replacing the VX Lumina stock front, rear, spoiler and skirts with S Pack ones...

Hi all, I just trying to learn how to tune my 1994 VR Berlina 3.8l v6. I am going to be running a big crow cam, valve springs and all sorts. I was seeing if anyone knew how to tune the memcal or whatever. I know I need to get a Eprom Programmer and a 28 pin adaptor. Do I need a Eprom Eraser...

Hi I joined just Commodores forum a couple of years ago when I bought a VT Berlina. I got into an accident and lost the car. A victim of neglect. I was really upset but now I have a VE Berlina 2006 Holden and I feel better. I would like to open this thread for you guys to help me with my car...

Hey guys, gals and pals Im in the gist of buying a new Starter for my VE Commodore 3.6L V6 Ute, (2009). When i am buying them, i notice that they all have a spade connector for the relay terminal? (the one that closes the circuit of the solenoid. whereas my original starter (Mitsubishi...

As we power down for a well-deserved break, we want to share our heartfelt gratitude with you, our valued community. Your trust in MACE has driven us forward in 2023, and we're revving up for an even more exhilarating 2024. Key Dates: Last Working Day: Today Back in Gear: Thursday, 4th January...

Hi all, I got this car 2nd hand. It has had this intermittent issue since the previous owner had it (they apparently had it checked but couldn't replicate or find the fault) On start up, if the aicon is on, it will sometimes only blow air at my feet no matter what setting is displayed on the...

Hi guys Iv got a 1987 VL non turbo and wanting to turbo the RB30 properly. Who can give me a comprehensive list of modifications I need to achieve the power. Group them in must have mods and optional mods. Don’t worry about budget too much…. For 200hp to 300hp For 400hp to 500hp Thanks...

MACE ENGINEERING GROUP BLACK FRIDAY BLOWOUT! ⭐Save Big on Performance and Engine Parts!⭐ YOUR CHANCE TO UPGRADE YOUR RIDE IS HERE! Promo Code "MACE2023" - Get a massive 10% OFF on all products at our AU and NZ websites! https://www.maceengineering.com.au...

Gear Up for Black Friday! This Friday marks the start of our exciting sale. Get ready to turbocharge your automotive dreams with 10% off across all Mace websites and 5% off on eBay Don't miss out on these high-octane deals! ️ Start your engines, the Black Friday sale begins on 24th November...

Hi there, I have a commodore vz ( v6 ) 2006 & I just did timing chain & oil pump on it, after finishing the job it was running very smooth & quiet, as soon as i took it for test drive, I notice a rattling noise started coming & it goes worst when I accelerate. I need your help guys please. Is...

Hey fellas, just been going over this commy I bought, fixing **** **** trying to get it to run good. I noticed the bolts for this plate are missing that go to the head next to the valley as show in the picture. It holds nothing to my understanding but seems to be sucking air through the holes...

Hey guys, here again. So I have two weird problems with my Commodore VE Ute 2008 5spd automatic. 1) the car has recently gotten a gearbox change, (torque converter stayed the same) and after driving it for a while I realised that it does not rev past 5,000RPM. I used to be able to go past it...

Hi guys, I'm currently rebuilding a LLT in my 2010 SV6 Ute. I need a new crankshaft and saw that revhigh sell one for it. I am just wondering if anyone has this in their commodore and if its worth it or get an oem replacement?

Hii, I have a 2004 VZ SV6 (LY7 10H7C) with starting issues which I'm hoping someone can shed some light on, Car cranks but just wont fire Tested spark: Good spark Sprayed some aero start down the guts and got some backfires Couldn't hear fuel pump so checked fuse/relay which turned out to be...

Thought I'll create a thread for people to show off their Diecast models/collections/builds Here is my best: 2004 VYII SS by AutoArt in Cosmo Purple, 1:18 scale, 1139/2000 ever made Note, this isn't my personal one pictured but looks like this... Sorry if I've got it in the wrong section...

Hi all I have a 2014 Holden vf sv6 and when you connect your phone to Bluetooth the experience isn’t that great, either sometimes disconnects or when skipping tracks it just stops, the only way to fix it is to touch your phone. What can I do?

delete pls