Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

dyno

  1. Jimbosa

    Cammed VE SS not making the power it should

    Hi guys first post, So I have a VE manual UTE with a L77 and its just been cammed with a VCM OTR, REX triple step headers and a 3 inch hurricane exhaust and its making 420rwhp but this cam is supposed to make at least 460rwhp if not more. these are the cam specs: HTP02 cam: 233/233 @-050...
  2. REDRUM-6L

    Ecu reading obd11 after dyno tune.

    Hey guys. I got my car dyno tuned last year but got an engine light come on, I’m thinking this dodgy of a mechanic just did a mafles tune, n charged me for a dyno. Is thier a way I can tell using my scanner if it has been dyno tuned.
  3. REDRUM-6L

    Ecu reading obd11 after dyno tune.

    Hey guys. I got my car dyno tuned last year but got an engine light come on, I’m thinking this dodgy of a mechanic just did a mafles tune, n charged me for a dyno. Is thier a way I can tell using my scanner if it has been dyno tuned.
  4. EviL_EniGmA

    Engine check/reco Advice and recommendations required for 2010 V8 Calais!

    Hey guys! so I’ve recently been lucky enough to purchase a 2010 V8 Calais! it has all the bells and whistles and appears to be in fairly good condition. Now what I would like some help on is what to start off with. The car currently has a cat back xforce system installed. Other then that it is...
  5. J

    Performance/Tuning/Dyno places in Adelaide

    Hi guys, Just wondering, for those located in Adelaide, who they might suggest for some mild “starter” modifications for my 2015 VF SS Commodore? Of course, I have done some reading, research, and quoted up prices on a few places. This includes Mopowa, Streetfighter, Independent Motoraports...
  6. H

    ProForm Performance In Perth REVIEWS PLEASE

    Hi I just Bought 2008 VE SSV UTE Manual. Going to install Pacemaker 1 7/8 Headers High Flow Cats And Manta 3" SS Exhaust. I been speaking to few places in perth. Just Wondering How Good ProForm Performance In Midland WA are for Maf Tuning. I never Heard of them, please share your...
  7. speed__demond

    great dyno tuner SE melbourne? holden 304

    hey all got me car running as best as I can with the mail order tune. its not ideal, but it drives fine. just doesn't idle properly and feels a bit sluggish for what it is. the motors 10.5 comp with a crow 4761 cam. motor had a freshenup a few years ago. I realise mail orders cant tune...
  8. trixtrem

    Rebuilt, cammed VE Calais V, dyno run and results

    Here is my '07 Calais V on the dyno. The motor had 100k km on it when it lost a roller off a lifter and turned my oil into Black metal flake paint!!!. Motor was pulled, thoroughly cleaned, checked, measured, honed new rings, ARP head bolts, VCM cam, Hi Vol oil pump, GTS headers, diff back...
  9. Mattde

    Best Tune in my area?

    Does anyone live around Milperra and know of a good reliable experienced place where I can get a good affordable tune for my VZ? Looking to get this done in the next few months but want to make sure I get the job done well! Cheers peeps ^.^ (Totally feel like I post too much.)
  10. S

    Is there anything wrong?

    Hi there fellas First time poster long time reader and i would just like to say that this site has helped me so much and i would just like to thank everyone on this site. Anyways back to the question i have just recently build my v6 commodore and it was the first time i had ever seen a dyno...
  11. czuio

    [ACT] Canberra Motoring Clubs United - Dyno Day for Lifeline

    Hi Guys, Didn't know where to post this as it's my 2nd? post. The Bring Back Braddon group and CMCU are running a Dyno Day to raise funds for Lifeline. If you are in the ACT or surrounding region and would like to get your car on the Dyno and donate to a worthwhile charity at the same...
  12. T

    VE SSV - dyno results low?

    hey all, ill list off the mods on the car to start with Orsomm OTR Hurricane 4>1 1" 7/8 headers 200 CPI hi flow cats 2.5 inch perry/HM catback. so basically OTR + full exhaust system i have had the car mafless tuned and run up on the dyno. now before any tuning was done - just bolt on mods...
  13. W

    Cheapest Dyno Tune in Sydney?

    ##############
  14. S

    Good tuner in Adelaide

    I've got a auto 09 ssv and have had 1 3/4 extractors, high flow cats and a 2 1/2 stainless sytem fitted with a otr and a tune. On Sunday I had it dynod at enhanced and pulled 244rwkw on their mainline dyno. Thought i would pull a bit more (was hoping for around 260) I'm going to get it...
  15. bmxbogan

    vz sv6 turbo tune

    hey everyone i am getting a rear mont turbo this week i have researched it and they sound like a cool idea and i got it cheap so i thought y not. but anyway i wont be installing it for a few months but i will be needing a tune once its in dose anyone know of someone in brisbane that can tune it...
  16. S

    Ignition Leads, Coilpacks & Spark Plugs

    Ive got a MY9.5 SSV and so far ive done exhaust high flow cats and extractors, otr and cutom mafless tune with a result of 270rwkw on a dyno dynamics dyno. If i were to replace the ignition leads, coilpacks and spark plugs would i gain more KW? if so how much could i expect and any help on...
  17. CuRt007

    What power will I be putting down?

    Hey guys, Just wondering what power I'd be throwing down at the wheels with these mods. Its a VT V6 5speed 3.8L ecotec. Its got a Mace CAI, Mace 1.98:1 roller rockers and 2.5" cat back. Also, if i got a tune, what extra power would i be looking at? Cheers, Curtis :)
  18. S

    Power Output (RWKW)

    I have got my SSV (MY9.5 L76 eninge) booked in to D&T to have Full 2.5" Stainless Exhaust, 1 3/4 Extractors, Highflow Cats, OTRCAI and a Mafless dyno tune on the 2/2/10. They are also removing the AFM when they do the tune. i was just wondering what RWKW i can expect when they dyno it? Also...
  19. camstatic

    My 92 VP Exec...

    301000kms old in Sapphire blue Advance Headers "High Flow" Cat Lukey mandrel bent 2.5" system with one straight-thru muffler Rebuilt 4L60 with Stage II shift kit, corvette servo, steel pistons, UHD bands, boosted pressure DBA Silver slotted rotors w/ Ferodo Excel pads Lukey washable panel...
Top