Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

loom

  1. Brayden3223

    Coil pack engine loom

    Hey guys so I just changed my thermostat and that’s something I never want to do again, I’ve just reassembled everything and tried to turn the engine over and it won’t go, I forgot to plug in a single cable but I can’t exactly work out where it’s meant to go? I can’t see any plugs near or around it
  2. Sam Droscher

    I need to know what a few sensor plugs are!! VZ SSZ

    Hey guys, First time I’m posting. I’m doing a few bits n’ pieces to the Ute and I’ve unplugged a bunch of things and forgotten what’s what. On the passenger side, there is a blue, orange, yellow and purple. I think one is the coolant temp sensor, the alternator and one is the maf sensor I...
  3. DjHarmes

    VY V6 loom on VX?

    Hey everyone, so I blew my motor in my vx bout a month ago and brought a motor and box out of a Vy with the loom, I was wondering if anyone know if it's straight plug and play or if there's any differences between the 2 , cheers
  4. N

    SIDI Conversion

    I have been trying to find any information regarding an sidi conversion into a vz manual ute. yes i have searched the fourms and all i can find is people saying just v8 swap its easier, v6 is a waste of time, ect, so if thats what your thinking please keep it too yourself. Im looking for any...
  5. Ddridan

    CLUBSPORT/OMEGA Loom similarities?

    Just wondering if anyone knows if the body loom is the same between E1 Clubsport and a VE omega? We have a wrecked clubby and an Omega to transplant the drive train into. We have the dash loom removed and was wondering if we have to take the body loom too from the clubby? Cheers
  6. K

    Need a level 3 patch loom!

    So lads, this is my first thread, and I didn't want it to be, I've been looking for a relevant thread for months. Anyway, the level 2 dash in my VR Executive has had broken contact points for as long as I've had it. So obviously, no fuel or water temp without a solid whack on the dash. I'm over...
  7. L

    VT Head Unit Wiring Issue

    Howdy! I've got a '98 VT Commodore Sedan (Acclaim I think). A couple weeks ago, my car was broken into and my headunit, amps, sub and hilariously bootliner (as it was attatched to the sub via a strap) are gone. Anywho, I'm looking to put something in on a budget, and found a sub and an...
  8. danielnitschke

    [VT-VX] Commodore VX-VT /// Installing 6x9 Speakers

    Hello All, Just finished installing some 6x9's in my VX 2002, much by trial and error. Thought I'd share with everyone and save people some time. There's no step by step that I could find on here that simplified things for us less savvy. 1. Remove back seat bottom part. (Pull two ties...
  9. V

    Upgrade cluster in VS UTE!

    Hello everyone me again.. i am buying a vs manual ute in a week and a half, now looking through the photo's i have seen that it has a level 1 cluster and i don't like not being able to see what engine rpm my car will be doing,i am not heaps car smart but will definitely know when to shift, but...
  10. I

    Help Holden VT Engine to dash Loom (I think)

    When i installed my headunit or my sub, when i was running the power cable i ran it through the i think its the main firewall underneath the driver side and to get it through i had to drill, and i think i remember hitting the look because i took the drill off and it looked like there was plastic...
  11. P

    [NSW] WTB: Loom to suit VE Subwoofer / Amp

    DESCRIPTION: Wanted to Buy ITEM: The loom / wiring that connects to the VE subs, Amplifier, Battery and rear doors, i'm sure some people here have upgraded their systems and no longer need their loom. LOCATION: NSW, Central West CONDITION: Used or New DELIVERY/PICK UP INFORMATION...
  12. G

    VY Dash and LS1 custom install, wiring advice needed

    hi all, I hope i have posted this in the right section. I have fitted a VY firewall along with the complete dash including the heater box and LS1 engine to 1985 trans am. I am using the VY chassis wiring loom along with the fuse box, relay box, PIM, BCM and ECU. not using traction...
  13. Holden vz

    Another fogligt problem

    [IMG]http://forums.justcommodores.com.au/attachment.php?attachmentid=163289&d=1373467587 hey guys i am trying to connect my fog lights to the Holden SS pull out switch that i got of eBay because the fog lights are controlled by a simple on off switch,i got the wiring harness kit off eBay...
  14. B

    1989 vn wiring problem

    HELP I changed over my interior from the stock to a custom ss interior , as I removed the dash I thought I labelled mist of the wiring groups , so I put i t back together and now when I connect my battery my headlights go on and wont turn.off at all, also in addition my temp gauge instantly goes...
  15. V

    Can someone make me a level 3 patch loom!? $$$$$$$$

    Hey guys, i have a level 3 cluster and i want all functions to work! i have the loom in the boot, along with a trip computer, can i pay someone to make it for me? Im in melbourne , i dont mind posting it and i can sort out a way of payment ( Paypal )
  16. J

    VR wiring Loom issues

    Hello I'm having trouble with the Loom in my VR executive the loom is a VR Calais I have the BCM and the auto ECU but i think i have done something wrong the headlights wont turn off (Even with the key out) the fuel and temp gage go to the top when the car isnt even started or anything no...
  17. J

    vs dash into vn

    hey every one i am thinking of puting a vs dash into my vn and i am wondering if it is possible to keep the vn dash cluster and loom and slicing the vs plugs for the wiper indcaters and so on into the vn loom.
  18. L

    Creating wiring loom and connecting to switches

    Hey people, wired up some of my lights over the last few days and thought some of you would be able to use this for installing things in your own car. Basically, this is how to make a wiring loom (lengths of wire wound up by tape) and then wire up an object with a switch. This How To is based on...
Top