also have a vx II 02 and am in the prcess of doing this. did u install it all sucessfully? some help would be greatly appreciated. i have started with the rears, bought the wiring loom,main switch and regulators, hooked everything up, and nothing, i can tell the motor is working because it heats up quite alot. i can only get the motors to slide fully up and fully down when i have it connected to the batter. at the moment i have the wires going from the main console switch to the which connects to the rear switch and the regulator. this did nothing, so i added a wire from the regulator to the neg and pos of the battery. is there something else i need to wire up? bcm? HELPP!!