05 ExecVZ
New Member
- Joined
- Oct 21, 2010
- Messages
- 2
- Reaction score
- 0
- Points
- 0
- Location
- Melbourne
- Members Ride
- Executive VZ 2005
http://sphotos.ak.fbcdn.net/hphotos...84210071831_1435012503_31723287_3308801_n.jpg
was just wondering if anyone has some advice for the repairs on this, dunno if i would need to replace the whole panel or if the rust can just be removed and then repaired. and the door just has very superficial scratches that i'll paint and the right side rusted cuts are the only 1's that are deep enough to an issue
Im currently on the Mornington Peninsula, but will be going back to Bendigo soonish so either areas would be great if you know some good panel beaters
and before i get flamed, i just bought the car today, so the dmg and rust isnt mine! for 9k with 61k on the clock and there's nothing else wrong with the car =)
was just wondering if anyone has some advice for the repairs on this, dunno if i would need to replace the whole panel or if the rust can just be removed and then repaired. and the door just has very superficial scratches that i'll paint and the right side rusted cuts are the only 1's that are deep enough to an issue
Im currently on the Mornington Peninsula, but will be going back to Bendigo soonish so either areas would be great if you know some good panel beaters
and before i get flamed, i just bought the car today, so the dmg and rust isnt mine! for 9k with 61k on the clock and there's nothing else wrong with the car =)