[VIC] 18x8's, VT Brakes, Custom VS Headliner, VS V6 L3 Cluster and more VS parts.

LOCATION: Warragul, VIC
DELIVERY/PICK UP INFORMATION: I'm happy to post small items at buyers expense, The rest of it will have to be picked up.
PAYMENT OPTIONS: Cash on pickup, or Bank transfer if posting.
CONTACT DETAILS: PM or Reply to this thread.

My VS got written off in a low speed rear impact collision a fortnight ago, So basically all my mods are up for sale.

Click the pictures to make them bigger!

Blue Illuminated Level 3 VS V6 Gauge Cluster - $120
- 312XXX Km from memory
- No cracks or marks in LCDs or gauge face.
- Blue illuminated markings with red bits still red. White Needles. White LCD's.
- Right hand mount point broken off, But it still sits OK due to the two mount points at the top.


VS Berlina Rear Seat - $15
- Good Condition, No tears.


VS Calais Wiper Control Stalk - $10
- The one with the intermittent timing control dial.

VS V6 2.5" Catback Exhaust - $110


VS Random Trim Parts - Ask me for a price on whatever you're after.
- Center double vent piece has been sold.


18x8 DTM Ultralite Battle Rims - $450
- Wheels are a bit scraped from the previous owner, But they aren't buckled at all.
- Two tires are Maxxis 235x45r18 tires with around %90 rubber.
- Other two have 235x45xr18 unsure of brand, around %50.
- Includes 16 chrome wheel nuts, 4 lock nuts with key and 22mm socket to fit.


4 x 15" VZ Stockies - $170
- All four with rubber - Dunlop LeMans 205/65/15.
- Over %50 tread on every wheel.
- 4 x VZ Executive hub caps included.

VS Genuine Air Intake - SOLD
VS Berlina/Calais/Stato/Caprice chrome upper door trim - SOLD
VT Brake upgrade - SOLD
Custom Black VS Headliner - SOLD
VS Rear Power Window Switches (PAIR) - SOLD
VS L3 Temp Gauge - SOLD

More pictures on request. Feel free to make an offer, I may consider it.

Fonzie :thumbsup:

 

No i don't have the plugs for sale. Either hunt around the wreckers or get on to 88greenvn about a patch loom. As for the center part, yes you can just buy the blue lights for behind it but it won't look the same. It'll mean that the red bits don't illuminate too.
As for the intake, Yes it helps. An upgraded intake is one of the first mods most people do, along with exhaust, when trying to make some power. There are a few threads on the forum about it, have a read of them.
Fonzie.

 

Air intake is pretty easy to install. Rip your airbox out, measure it up and take a hacksaw to it. Then clip the whole lot in. Screw the box back in, mark the holes on the top of the radiator shroud you have to drill and drill them. Be SUPER careful, people have been known to put 3 perfect 5mm holes in their radiator while doing this. Then simply put the clips in and you're done.

If you put blue lights behind any factory fascia in a VS commo, The green bits will light up blue, and the red bits won't illuminate at all. Yes I'd be happy to sell the trip computer on its own, $20.

 

Lights? As in the ones behind the gauge cluster? I don't have the ones you're after. The gauge cluster i have for sale has a custom fascia in it, and white LED's behind it as well as behind the LCD's to give it that look. I wrote a how to if you want to achieve the same look.
Fonzie.

 

Tomorrow, Today, Now? PM Sent.

Sure does. PM Sent.

Intake sold pending pickup.

Fonzie.

 

Says at the top of the thread, in the thread title and in my profile mate. Warragul Vic.

 

The WH is the VT style/series/whatever stato yeah? If so, I don't see why not. But do your own research, I can't guarantee it. The VT calipers and lines were off a series 1 - I know this because they had a bracket thing on the end of the line that got in my way and I had to grind it off. You've already got the calipers and pads though mate, and you won't need the shims so to be honest you'd be better off just buying new slotted discs off GSL Rallysport on this forum. Top bloke, He'll do you a great deal and it'll cost you less than buying this off me.

 

Stato chrome door trims, SS Inductions air intake and Door Pods are gone. I'm intending to have a car by the end of this week, And If so I can come to a Friday night Fountain Gate meet and bring stuff. Wheels may not fit in the new car though, We'll see.
Fonzie :thumbsup:

 

The cluster will physically fit in and the Fuel, Temp, RPM and Speedo gauges will work... But you need to do some modifications to get the LCD's to work. There' s a thread all about it.. Link below.
http://forums.justcommodores.com.au/vr-vs-holden-commodore-1993-1997/994-tripin.html
It's a pretty easy upgrade to do honestly, It's what I did to mine.
Fonzie :thumbsup: