tavrin
New Member
- Joined
- Sep 4, 2011
- Messages
- 365
- Reaction score
- 0
- Points
- 0
- Location
- Melbourne
- Members Ride
- VS Executive S2 L67
Hey guys,
I'm going to be dropping in my forged L67 motor hopefully on Thursday.
The motor has an XP hot cam stage 2 ported LIM & Blower and will be running 10psi as a 'run-in pulley' (non-intercooled)
Which brings me to the question... Would a 2.5" system be okay for 10psi? (Has a full redback system at the moment) *Paired with a set of wild cat extractors*
Or would you guys recommend the 3"?
I plan on getting a 3" but I was hoping to save the exhaust $ for now and spend it on a surge tank and intercooler plate.
Cheers.
I'm going to be dropping in my forged L67 motor hopefully on Thursday.
The motor has an XP hot cam stage 2 ported LIM & Blower and will be running 10psi as a 'run-in pulley' (non-intercooled)
Which brings me to the question... Would a 2.5" system be okay for 10psi? (Has a full redback system at the moment) *Paired with a set of wild cat extractors*
Or would you guys recommend the 3"?
I plan on getting a 3" but I was hoping to save the exhaust $ for now and spend it on a surge tank and intercooler plate.
Cheers.
