Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

!!!2 wheel bearings later..and the problem is still there..??

slappedvr

New Member
Joined
Nov 23, 2008
Messages
308
Reaction score
1
Points
0
Members Ride
vr executive
hey guys i have a vr v6 commodore eecutive. when i bought it there was a knocking sound in the wheel whenever i turned right. i changed the wheel bearing and it was still there. i thought i got a faulty wheel bearing so i changed it to a newer 1 and the knocking is still there ....surely its not the wheel bearing still... any ideas of what it might be?? any help would be greatly appreciated as i am getting quiet angry with this continous problem..
thanx guys
cheers jordan
 

08sky_way

Member
Joined
Sep 9, 2008
Messages
104
Reaction score
0
Points
16
Location
Kingsley WA
Members Ride
VR Acclaim
Check to see if any of the rubber bushes at each end of the stabiliser links attached to the stabiliser bar are missing.
 

danja

Swerves for gay koalas
Joined
Jan 26, 2006
Messages
1,786
Reaction score
56
Points
48
Location
Sydney
Members Ride
CBF 250 and a Levin ZR
Yup, +1 for sway bar link pin bushes. The get brittle and spit them after a while, especially older models which load up bad when the wheel is at full lock.
 

ephect

Donating Member
Joined
Jul 27, 2006
Messages
5,901
Reaction score
15,427
Points
113
Location
Melbourne
Members Ride
VS Acclaim V6
as above, that n also strut top bearings if the sway link bushes are good.
 
Top