6_AVOID_6
New Member
- Joined
- Jun 20, 2022
- Messages
- 1
- Reaction score
- 0
- Points
- 1
- Age
- 21
- Location
- Victoria, Shepparton
- Members Ride
- 2005 Vz Wagon
So short story I blew up my 2005 Vz wagon engine (175kw) and have recently installed a 2005 Svz Engine Saden and 5 speed trans (190kw)
I have swap the ecu, computers, reprogramed my bcm to the new computer and have installed the engine loom and the little black box in the fues department all off the svz, into my Vz wagon
The Svz engine was working perfectly before swaping them (I even dove it up the driveway)
The problem I'm having is that the engine wont start doesn't even crank over, tho the throttle gate is opening, the fuel pump is pumping, the injecter are working but there is no crank???
I have swap the ecu, computers, reprogramed my bcm to the new computer and have installed the engine loom and the little black box in the fues department all off the svz, into my Vz wagon
The Svz engine was working perfectly before swaping them (I even dove it up the driveway)
The problem I'm having is that the engine wont start doesn't even crank over, tho the throttle gate is opening, the fuel pump is pumping, the injecter are working but there is no crank???