2016 VF S2 SSV manual, Squeak

[dwdh40]

Anyone have an issue with a SQUEAK in the possible Clutch area, push Clutch in each time 1st-2nd-3rd-4th gear hear a Squeak each time, 4th-5th-6th Ok.
Then coming down back into 4th-3rd-2nd-1st hear a squeak. No Squeak stationary pushing Clutch in and out it only happens when moving.

 

[Sir Les]

Do you get the squeak going through the gears whilst stationary, with the engine off and not pressing the clutch pedal? If so, it could be the gear lever squeaking as you go through the gate.

 

[Anthony Burgess]

Anyone have an issue with a SQUEAK in the possible Clutch area, push Clutch in each time 1st-2nd-3rd-4th gear hear a Squeak each time, 4th-5th-6th Ok.
Then coming down back into 4th-3rd-2nd-1st hear a squeak. No Squeak stationary pushing Clutch in and out it only happens when moving.

I had this problem last year with my ssv manual 16, they changed my whole clutch assembly under warranty

 

[Emco]

Funny enough I thought the squeek was coming from clutch too,
It was actually coming from the bi modals opening and closing. Wd40 down the exhaust where bi modal are fixed this issue.
My car is an Vf2 ssv redline

 

[dwdh40]

Not the bi modal it’s on all the time

 

[Emco]

Not the bi modal it’s on all the time

On all the time as if you pulled the relay out or it's on in sport mode?

 

[dwdh40]

no the bi modal setting is just left on through the radio settings.

 

[LyLy]

I had a squeak in mine too , and couldn’t find where it was coming from It turned out to be the seat when shifting
The dealer lubed it in service now all good

 

[Emco]

no the bi modal setting is just left on through the radio settings.

So it opens and closes around 3000rpm , try starting wd40 where the flaps opens and close

 

[dwdh40]

Nah its defiantly not the seats its loud when it wants to be, and defiantly outside the car