kent3
New Member
- Joined
- Mar 16, 2011
- Messages
- 5
- Reaction score
- 0
- Points
- 0
- Location
- burrum heads
- Members Ride
- vs commodore
Hi,
I have a set of gears out of an old falcon borg warner diff (25 spline xh falcon i think). I need to fit these to VR/VS Diff housing. I have fitted the crown wheel to the 28 spline carrier and have started to set the pinion depth. This is where it is starting to get hard, I cant get a good marking on both the drive and coast side of the crown wheel gears. Either 1 is good and the other is bad or vise verser.
Just wondering if anyone has successfully achieved one of these conversions.
I have a set of gears out of an old falcon borg warner diff (25 spline xh falcon i think). I need to fit these to VR/VS Diff housing. I have fitted the crown wheel to the 28 spline carrier and have started to set the pinion depth. This is where it is starting to get hard, I cant get a good marking on both the drive and coast side of the crown wheel gears. Either 1 is good and the other is bad or vise verser.
Just wondering if anyone has successfully achieved one of these conversions.