Lewie
B Cast and flat topped!
- Joined
- Nov 6, 2006
- Messages
- 203
- Reaction score
- 5
- Points
- 18
- Location
- Adelaide, SA
- Members Ride
- Very thirsty VT & VH project under way! YAY!!
ITEM: 304, 308 Block painstakingly deburred and smoothed over. Oil returns opened and ENTIRE valley smoothed and dressed. Bought as a short block so included are the crank, pistons and oil pump.LOCATION: Nowra, NSW (South Coast)
CONDITION: Used
PRICE: $400 or best offer. If you are going to make an offer please PM me. All funds will be fed to my VH project cars new heart.
DELIVERY/PICK UP INFORMATION: Pick up preferred or delivery within 50-70kms for a cold case of beer! I do go to Canberra every now and then if you are willing to wait and part with a case.
PAYMENT OPTIONS: COD, Direct Deposit, Funds Transfer are all ok.
CONTACT DETAILS: Email: [email protected] or PM
OTHER INFO: Casting numbers are prefixed with "VA*******". When I pulled the engine apart the pistons weren't in the best shape. One had damage to the top ring but none visible in the bore. All surfaces have been given a light wire wheel. Hopefully I'll get the chance to use someones high pressure hose and clean it up a little more.
This will be listed for sale in other places but I thought I'd give JC members the first chance.
PICTURES: Yup...
I forgot to mention It was sold to me with virgin bores but I don't have the gear to measure it accurately. There is also an "X" cast into the big end of the rods. Not sure if this is standard or not.
CONDITION: Used
PRICE: $400 or best offer. If you are going to make an offer please PM me. All funds will be fed to my VH project cars new heart.
DELIVERY/PICK UP INFORMATION: Pick up preferred or delivery within 50-70kms for a cold case of beer! I do go to Canberra every now and then if you are willing to wait and part with a case.
PAYMENT OPTIONS: COD, Direct Deposit, Funds Transfer are all ok.
CONTACT DETAILS: Email: [email protected] or PM
OTHER INFO: Casting numbers are prefixed with "VA*******". When I pulled the engine apart the pistons weren't in the best shape. One had damage to the top ring but none visible in the bore. All surfaces have been given a light wire wheel. Hopefully I'll get the chance to use someones high pressure hose and clean it up a little more.
This will be listed for sale in other places but I thought I'd give JC members the first chance.
PICTURES: Yup...
I forgot to mention It was sold to me with virgin bores but I don't have the gear to measure it accurately. There is also an "X" cast into the big end of the rods. Not sure if this is standard or not.
Attachments
Last edited:
