Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

304 in v6 vs

BANDIT

New Member
Joined
Mar 30, 2013
Messages
4
Reaction score
0
Points
0
Location
hackham
Members Ride
VS 304
gday guys need help just put a 304 in a v6 vs and its not starting.
changed loom motor ecu cranked it dident start then found out about the BCM changed that with key to match
still not starting. if i was to chang the memcal with the vats disabled will the car start? also have power to coil spark at leads fuel pressuer still not starting
 

yxyx64

New Member
Joined
Feb 25, 2012
Messages
471
Reaction score
1
Points
0
Location
nsw
Members Ride
Kia turbo + Holden badge, Chev badge in Texas
gday guys need help just put a 304 in a v6 vs and its not starting.
changed loom motor ecu cranked it dident start then found out about the BCM changed that with key to match
still not starting. if i was to chang the memcal with the vats disabled will the car start? also have power to coil spark at leads fuel pressuer still not starting

good way to start a car is to stand on one foot and wave the opposing arm in the air. Helps if you put a finger in your mouth at the same time.
 
Last edited:

BANDIT

New Member
Joined
Mar 30, 2013
Messages
4
Reaction score
0
Points
0
Location
hackham
Members Ride
VS 304
is there a way to chek that without a spec tool??
 

yxyx64

New Member
Joined
Feb 25, 2012
Messages
471
Reaction score
1
Points
0
Location
nsw
Members Ride
Kia turbo + Holden badge, Chev badge in Texas
is there a way to chek that without a spec tool??

just make sure its your own finger (works better that way). Good luck.
 
Last edited:
Top